[Lustre-discuss] Not sure how we should configure our RAID arrays (HW limitation)

[Frank Riley]

Hello,

We are using Nexsan E18s for our storage systems, and we are in the process of setting them up for Lustre. Each E18 has 18 disks total (max'ed out) in them. According to the Lustre docs, I want to have a stripe width of 1MB. Unfortunately, these E18s have a max stripe size of 128K. As I see it, for RAID6 this leaves us two options:

1)  One array 16+2 with a stripe size of 64K for a stripe width of 1MB. I'm hesitant with this option because of the increased chance that we could have more than 2 disks fail.

2) Do two arrays 7+2 with a stripe size of 128K for a stripe width of 896K. I'd then modify the max_pages_per_rpc tunable to match the 896K. I'm not sure what to do with the flex_bg filesystem option since it has to be a power of 2.

What is the better option here? Or is there an option I'm missing? I've pretty much ruled out RAID5 arrays at 8+1 due to data loss risk, and RAID1+0 wastes too much disk for our use.

Thank you,
Frank