[lustre-devel] [PATCH RFC 00/28] lustre: PFL port to linux client

NeilBrown neilb at suse.com
Mon Dec 17 22:21:35 PST 2018


On Mon, Dec 17 2018, James Simmons wrote:

> This is the initial PFL port to the linux lustre client. This opens
> up feed back on the port so far. Currently sanity passes but the
> test for sanity-pfl fail as below. I have been tracking downing
> various bugs but this one remains and I haven't found out why its
> failing. So far from what I can tell is lov_io_setattr_iter_init()
> it returning -ENODATA due to lsm_entry_inited() is not initialized.

Having that invariant in cl_io_iter_fini() seems strange.
It is guaranteed to fir eif cl_io_iter_init() fails - if that is not
permitted, I would expect an invariant a lot closer to the failure.

What happens if you just remove the LINVRNT() ??

NeilBrown

> Hoping that sending this out more eyes might help to see where this
> last problem is.
>
> Lustre: DEBUG MARKER: == sanity-pfl test 0: Create full components file, no reused OSTs =======
> ============================= 10:53:08 (1545061988)
> Lustre: DEBUG MARKER: create directory /lustre/lustre/d0.sanity-pfl
> Lustre: DEBUG MARKER: create comp_file
> Lustre: DEBUG MARKER: instantiate components
> LustreError: 19350:0:(cl_io.c:439:cl_io_iter_fini()) ASSERTION( io->ci_state == CIS_UNLOCKED )
> failed:
> LustreError: 19350:0:(cl_io.c:439:cl_io_iter_fini()) LBUG
> Pid: 19350, comm: dd 4.20.0-rc6+ #1 SMP PREEMPT Sat Dec 15 11:22:06 EST 2018
> Call Trace:
>   libcfs_call_trace+0x8b/0xc0 [libcfs]
>   lbug_with_loc+0x41/0x90 [libcfs]
>   cl_io_iter_fini+0x10c/0x110 [obdclass]
>   cl_io_loop+0x46/0x220 [obdclass]
>   cl_setattr_ost+0x1ed/0x2a0 [lustre]
>   ll_setattr_raw+0x797/0x980 [lustre]
>   notify_change+0x1dc/0x430
>   do_truncate+0x72/0xc0
>   do_sys_ftruncate+0xf5/0x160
>   do_syscall_64+0x68/0x38f
>
> Bobi Jam (20):
>   lustre: lov: move code for PFL work
>   lustre: lov: merge lov_mds_md_v3 and lov_mds_md_v1 handling
>   lustre: lov: fold lmm_verify() handling into lmm_unpackmd()
>   lustre: lov: create struct lov_stripe_md_entry
>   lustre: lov: add composite layout unpacking
>   lustre: lov: embedded raid0 in struct lov_layout_composite
>   lustre: lov: migrate lov raid0 to future PFL component handling
>   lustre: lov: reduce code indentation
>   lustre: lov: change lo_entries to array.
>   lustre: lov: move around PFL code and cleanups
>   lustre: lov: remove lsm_stripe_by_[index|offset]_plain
>   lustre: lov: add looping lsm_entry_count times
>   lustre: lov: create lov_comp_* wrappers
>   lustre: clio: client side implementation for PFL
>   lustre: pfl: dynamic layout modification with write/truncate
>   lustre: pfl: calculate PFL file LOVEA correctly
>   lustre: lov: keep minimum LOVEA size
>   lustre: pfl: fix hang with grouplocks
>   lustre: pfl: fix ost pool op->size handling
>   lustre: llite: restore ll_file_getstripe in ll_lov_setstripe
>
> Fan Yong (1):
>   lustre: pfl: enhance PFID EA for PFL
>
> Jinshan Xiong (3):
>   lustre: pfl: Read should not trigger layout write intent
>   lustre: lov: readahead shouldn't exceed component boundary
>   lustre: lov: do not split IO for single striped file
>
> Niu Yawei (4):
>   lustre: pfl: Basic data structures for composite layout
>   lustre: clio: getstripe support comp layout
>   lustre: uapi: support negative flags
>   lustre: llite: return v1/v3 layout for legacy app
>
>  .../lustre/include/uapi/linux/lustre/lustre_idl.h  |  36 +-
>  .../lustre/include/uapi/linux/lustre/lustre_user.h |  88 ++-
>  drivers/staging/lustre/lustre/include/cl_object.h  |  12 +-
>  drivers/staging/lustre/lustre/include/lustre_sec.h |   4 +-
>  .../staging/lustre/lustre/include/lustre_swab.h    |   1 +
>  drivers/staging/lustre/lustre/include/obd.h        |   4 -
>  drivers/staging/lustre/lustre/llite/dir.c          |  38 +-
>  drivers/staging/lustre/lustre/llite/file.c         | 185 +++--
>  .../staging/lustre/lustre/llite/llite_internal.h   |   3 +
>  drivers/staging/lustre/lustre/llite/vvp_io.c       |  44 +-
>  drivers/staging/lustre/lustre/llite/xattr.c        |  70 +-
>  .../staging/lustre/lustre/lov/lov_cl_internal.h    | 191 ++---
>  drivers/staging/lustre/lustre/lov/lov_ea.c         | 570 ++++++++++----
>  drivers/staging/lustre/lustre/lov/lov_internal.h   | 175 +++--
>  drivers/staging/lustre/lustre/lov/lov_io.c         | 651 +++++++++-------
>  drivers/staging/lustre/lustre/lov/lov_lock.c       |  94 ++-
>  drivers/staging/lustre/lustre/lov/lov_merge.c      |  12 +-
>  drivers/staging/lustre/lustre/lov/lov_object.c     | 833 ++++++++++++---------
>  drivers/staging/lustre/lustre/lov/lov_offset.c     |  65 +-
>  drivers/staging/lustre/lustre/lov/lov_pack.c       | 364 +++++----
>  drivers/staging/lustre/lustre/lov/lov_page.c       |  42 +-
>  drivers/staging/lustre/lustre/lov/lov_pool.c       |  20 +-
>  drivers/staging/lustre/lustre/lov/lovsub_object.c  |  23 +-
>  drivers/staging/lustre/lustre/mdc/mdc_locks.c      |  79 +-
>  drivers/staging/lustre/lustre/obdclass/cl_object.c |   5 +-
>  drivers/staging/lustre/lustre/obdclass/genops.c    |  16 +-
>  drivers/staging/lustre/lustre/osc/osc_io.c         |   4 +-
>  drivers/staging/lustre/lustre/ptlrpc/layout.c      |   6 +-
>  .../staging/lustre/lustre/ptlrpc/pack_generic.c    |  84 ++-
>  .../staging/lustre/lustre/ptlrpc/ptlrpc_internal.h |   7 +-
>  drivers/staging/lustre/lustre/ptlrpc/sec.c         |   5 +-
>  drivers/staging/lustre/lustre/ptlrpc/wiretest.c    | 125 +++-
>  32 files changed, 2483 insertions(+), 1373 deletions(-)
>
> -- 
> 1.8.3.1
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 832 bytes
Desc: not available
URL: <http://lists.lustre.org/pipermail/lustre-devel-lustre.org/attachments/20181218/04e0a916/attachment.sig>


More information about the lustre-devel mailing list