[lustre-devel] [PATCH 18/28] lustre: mdc: expose changelog through char devices
James Simmons
jsimmons at infradead.org
Sun Nov 4 13:31:27 PST 2018
> On Sun, Oct 14 2018, James Simmons wrote:
>
> > From: Henri Doreau <henri.doreau at cea.fr>
> >
> > Register one character device per MDT in order to allow non-llapi to
> > read them and to make delivery more efficient.
> >
> > - open() spawns a thread to prefetch records and enqueue them into a
> > local buffer (unless the device is open in write-only mode).
> > - lseek() can be used to jump to a specific record, in which case the
> > offset is a record number (with SEEK_SET) or a number of records to
> > skip (SEEK_CUR). Movement can only be done forward.
> > - read() copies records to userland. No truncation happens, so short
> > reads are likely.
> > - write() is used to transmit control commands to the device.
> > The only available one is changelog_clear, which is done by writing
> > "clear:cl<user>:<recno>" into the device.
> > - close() terminates the prefetch thread if any, and releases resources.
> >
> > It is possible to poll() on the device to get notified when new records
> > are available for read.
> >
> > Signed-off-by: Henri Doreau <henri.doreau at cea.fr>
> > WC-bug-id: https://jira.whamcloud.com/browse/LU-7659
> > Reviewed-on: https://review.whamcloud.com/18900
> > Reviewed-by: Andreas Dilger <adilger at whamcloud.com>
> > Reviewed-by: John L. Hammond <jhammond at whamcloud.com>
> > Reviewed-by: Oleg Drokin <green at whamcloud.com>
> > Signed-off-by: James Simmons <jsimmons at infradead.org>
>
> This patches causes problems around sanity test 161a.
> If you run -only '160h 160i 161a' it hangs.
>
> Adding
> Commit: 89e52326b5bd ("LU-10166 mdc: invalid free in changelog reader")
> seems to fix the problem, so I'll port that into the series immediately
> after this patch.
I was planning to push this in the next batch. I wouldn't push it in that
case and just wait for it to show up in lustre-testing.
> > .../include/uapi/linux/lustre/lustre_kernelcomm.h | 3 -
> > .../lustre/include/uapi/linux/lustre/lustre_user.h | 7 -
> > drivers/staging/lustre/lustre/include/obd.h | 2 +
> > drivers/staging/lustre/lustre/ldlm/ldlm_lib.c | 2 +
> > drivers/staging/lustre/lustre/llite/dir.c | 8 -
> > drivers/staging/lustre/lustre/lmv/lmv_obd.c | 13 -
> > drivers/staging/lustre/lustre/mdc/Makefile | 2 +-
> > drivers/staging/lustre/lustre/mdc/mdc_changelog.c | 722 +++++++++++++++++++++
> > drivers/staging/lustre/lustre/mdc/mdc_internal.h | 4 +
> > drivers/staging/lustre/lustre/mdc/mdc_request.c | 198 +-----
> > 11 files changed, 745 insertions(+), 218 deletions(-)
> > create mode 100644 drivers/staging/lustre/lustre/mdc/mdc_changelog.c
> >
> > diff --git a/drivers/staging/lustre/include/uapi/linux/lustre/lustre_ioctl.h b/drivers/staging/lustre/include/uapi/linux/lustre/lustre_ioctl.h
> > index 6e4e109..098b6451 100644
> > --- a/drivers/staging/lustre/include/uapi/linux/lustre/lustre_ioctl.h
> > +++ b/drivers/staging/lustre/include/uapi/linux/lustre/lustre_ioctl.h
> > @@ -172,7 +172,7 @@ static inline __u32 obd_ioctl_packlen(struct obd_ioctl_data *data)
> > #define OBD_GET_VERSION _IOWR('f', 144, OBD_IOC_DATA_TYPE)
> > /* OBD_IOC_GSS_SUPPORT _IOWR('f', 145, OBD_IOC_DATA_TYPE) */
> > /* OBD_IOC_CLOSE_UUID _IOWR('f', 147, OBD_IOC_DATA_TYPE) */
> > -#define OBD_IOC_CHANGELOG_SEND _IOW('f', 148, OBD_IOC_DATA_TYPE)
> > +/* OBD_IOC_CHANGELOG_SEND _IOW('f', 148, OBD_IOC_DATA_TYPE) */
> > #define OBD_IOC_GETDEVICE _IOWR('f', 149, OBD_IOC_DATA_TYPE)
> > #define OBD_IOC_FID2PATH _IOWR('f', 150, OBD_IOC_DATA_TYPE)
> > /* lustre/lustre_user.h 151-153 */
> > diff --git a/drivers/staging/lustre/include/uapi/linux/lustre/lustre_kernelcomm.h b/drivers/staging/lustre/include/uapi/linux/lustre/lustre_kernelcomm.h
> > index 94dadbe..d84a8fc 100644
> > --- a/drivers/staging/lustre/include/uapi/linux/lustre/lustre_kernelcomm.h
> > +++ b/drivers/staging/lustre/include/uapi/linux/lustre/lustre_kernelcomm.h
> > @@ -54,15 +54,12 @@ struct kuc_hdr {
> > __u16 kuc_msglen;
> > } __aligned(sizeof(__u64));
> >
> > -#define KUC_CHANGELOG_MSG_MAXSIZE (sizeof(struct kuc_hdr) + CR_MAXSIZE)
> > -
> > #define KUC_MAGIC 0x191C /*Lustre9etLinC */
> >
> > /* kuc_msgtype values are defined in each transport */
> > enum kuc_transport_type {
> > KUC_TRANSPORT_GENERIC = 1,
> > KUC_TRANSPORT_HSM = 2,
> > - KUC_TRANSPORT_CHANGELOG = 3,
> > };
> >
> > enum kuc_generic_message_type {
> > diff --git a/drivers/staging/lustre/include/uapi/linux/lustre/lustre_user.h b/drivers/staging/lustre/include/uapi/linux/lustre/lustre_user.h
> > index b8525e5..715f1c5 100644
> > --- a/drivers/staging/lustre/include/uapi/linux/lustre/lustre_user.h
> > +++ b/drivers/staging/lustre/include/uapi/linux/lustre/lustre_user.h
> > @@ -967,13 +967,6 @@ static inline void changelog_remap_rec(struct changelog_rec *rec,
> > rec->cr_flags = (rec->cr_flags & CLF_FLAGMASK) | crf_wanted;
> > }
> >
> > -struct ioc_changelog {
> > - __u64 icc_recno;
> > - __u32 icc_mdtindex;
> > - __u32 icc_id;
> > - __u32 icc_flags;
> > -};
> > -
> > enum changelog_message_type {
> > CL_RECORD = 10, /* message is a changelog_rec */
> > CL_EOF = 11, /* at end of current changelog */
> > diff --git a/drivers/staging/lustre/lustre/include/obd.h b/drivers/staging/lustre/lustre/include/obd.h
> > index 11e7ae8..76ae0b3 100644
> > --- a/drivers/staging/lustre/lustre/include/obd.h
> > +++ b/drivers/staging/lustre/lustre/include/obd.h
> > @@ -345,6 +345,8 @@ struct client_obd {
> > void *cl_lru_work;
> > /* hash tables for osc_quota_info */
> > struct rhashtable cl_quota_hash[MAXQUOTAS];
> > + /* Links to the global list of registered changelog devices */
> > + struct list_head cl_chg_dev_linkage;
> > };
> >
> > #define obd2cli_tgt(obd) ((char *)(obd)->u.cli.cl_target_uuid.uuid)
> > diff --git a/drivers/staging/lustre/lustre/ldlm/ldlm_lib.c b/drivers/staging/lustre/lustre/ldlm/ldlm_lib.c
> > index 32eda4f..732ef3a 100644
> > --- a/drivers/staging/lustre/lustre/ldlm/ldlm_lib.c
> > +++ b/drivers/staging/lustre/lustre/ldlm/ldlm_lib.c
> > @@ -395,6 +395,8 @@ int client_obd_setup(struct obd_device *obddev, struct lustre_cfg *lcfg)
> > init_waitqueue_head(&cli->cl_mod_rpcs_waitq);
> > cli->cl_mod_tag_bitmap = NULL;
> >
> > + INIT_LIST_HEAD(&cli->cl_chg_dev_linkage);
> > +
> > if (connect_op == MDS_CONNECT) {
> > cli->cl_max_mod_rpcs_in_flight = cli->cl_max_rpcs_in_flight - 1;
> > cli->cl_mod_tag_bitmap = kcalloc(BITS_TO_LONGS(OBD_MAX_RIF_MAX),
> > diff --git a/drivers/staging/lustre/lustre/llite/dir.c b/drivers/staging/lustre/lustre/llite/dir.c
> > index 19c5e9c..36cea8d 100644
> > --- a/drivers/staging/lustre/lustre/llite/dir.c
> > +++ b/drivers/staging/lustre/lustre/llite/dir.c
> > @@ -1481,14 +1481,6 @@ static long ll_dir_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
> > return obd_iocontrol(cmd, sbi->ll_md_exp, 0, NULL,
> > (void __user *)arg);
> > }
> > - case OBD_IOC_CHANGELOG_SEND:
> > - case OBD_IOC_CHANGELOG_CLEAR:
> > - if (!capable(CAP_SYS_ADMIN))
> > - return -EPERM;
> > -
> > - rc = copy_and_ioctl(cmd, sbi->ll_md_exp, (void __user *)arg,
> > - sizeof(struct ioc_changelog));
> > - return rc;
> > case OBD_IOC_FID2PATH:
> > return ll_fid2path(inode, (void __user *)arg);
> > case LL_IOC_GETPARENT:
> > diff --git a/drivers/staging/lustre/lustre/lmv/lmv_obd.c b/drivers/staging/lustre/lustre/lmv/lmv_obd.c
> > index 952c68e..32bb9fc 100644
> > --- a/drivers/staging/lustre/lustre/lmv/lmv_obd.c
> > +++ b/drivers/staging/lustre/lustre/lmv/lmv_obd.c
> > @@ -951,19 +951,6 @@ static int lmv_iocontrol(unsigned int cmd, struct obd_export *exp,
> > kfree(oqctl);
> > break;
> > }
> > - case OBD_IOC_CHANGELOG_SEND:
> > - case OBD_IOC_CHANGELOG_CLEAR: {
> > - struct ioc_changelog *icc = karg;
> > -
> > - if (icc->icc_mdtindex >= count)
> > - return -ENODEV;
> > -
> > - tgt = lmv->tgts[icc->icc_mdtindex];
> > - if (!tgt || !tgt->ltd_exp || !tgt->ltd_active)
> > - return -ENODEV;
> > - rc = obd_iocontrol(cmd, tgt->ltd_exp, sizeof(*icc), icc, NULL);
> > - break;
> > - }
> > case LL_IOC_GET_CONNECT_FLAGS: {
> > tgt = lmv->tgts[0];
> >
> > diff --git a/drivers/staging/lustre/lustre/mdc/Makefile b/drivers/staging/lustre/lustre/mdc/Makefile
> > index 64cf49e..5f48e91 100644
> > --- a/drivers/staging/lustre/lustre/mdc/Makefile
> > +++ b/drivers/staging/lustre/lustre/mdc/Makefile
> > @@ -2,4 +2,4 @@ ccflags-y += -I$(srctree)/drivers/staging/lustre/include
> > ccflags-y += -I$(srctree)/drivers/staging/lustre/lustre/include
> >
> > obj-$(CONFIG_LUSTRE_FS) += mdc.o
> > -mdc-y := mdc_request.o mdc_reint.o mdc_lib.o mdc_locks.o lproc_mdc.o
> > +mdc-y := mdc_changelog.o mdc_request.o mdc_reint.o mdc_lib.o mdc_locks.o lproc_mdc.o
> > diff --git a/drivers/staging/lustre/lustre/mdc/mdc_changelog.c b/drivers/staging/lustre/lustre/mdc/mdc_changelog.c
> > new file mode 100644
> > index 0000000..a5f3c64
> > --- /dev/null
> > +++ b/drivers/staging/lustre/lustre/mdc/mdc_changelog.c
> > @@ -0,0 +1,722 @@
> > +// SPDX-License-Identifier: GPL-2.0
> > +/*
> > + * GPL HEADER START
> > + *
> > + * DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER.
> > + *
> > + * This program is free software; you can redistribute it and/or modify
> > + * it under the terms of the GNU General Public License version 2 only,
> > + * as published by the Free Software Foundation.
> > + *
> > + * This program is distributed in the hope that it will be useful, but
> > + * WITHOUT ANY WARRANTY; without even the implied warranty of
> > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
> > + * General Public License version 2 for more details (a copy is included
> > + * in the LICENSE file that accompanied this code).
> > + *
> > + * You should have received a copy of the GNU General Public License
> > + * version 2 along with this program; If not, see
> > + * http://www.gnu.org/licenses/gpl-2.0.html
> > + *
> > + * GPL HEADER END
> > + */
> > +/*
> > + * Copyright (c) 2017, Commissariat a l'Energie Atomique et aux Energies
> > + * Alternatives.
> > + *
> > + * Author: Henri Doreau <henri.doreau at cea.fr>
> > + */
> > +
> > +#define DEBUG_SUBSYSTEM S_MDC
> > +
> > +#include <linux/init.h>
> > +#include <linux/kthread.h>
> > +#include <linux/poll.h>
> > +#include <linux/miscdevice.h>
> > +
> > +#include <lustre_log.h>
> > +
> > +#include "mdc_internal.h"
> > +
> > +/*
> > + * -- Changelog delivery through character device --
> > + */
> > +
> > +/**
> > + * Mutex to protect chlg_registered_devices below
> > + */
> > +static DEFINE_MUTEX(chlg_registered_dev_lock);
> > +
> > +/**
> > + * Global linked list of all registered devices (one per MDT).
> > + */
> > +static LIST_HEAD(chlg_registered_devices);
> > +
> > +struct chlg_registered_dev {
> > + /* Device name of the form "changelog-{MDTNAME}" */
> > + char ced_name[32];
> > + /* Misc device descriptor */
> > + struct miscdevice ced_misc;
> > + /* OBDs referencing this device (multiple mount point) */
> > + struct list_head ced_obds;
> > + /* Reference counter for proper deregistration */
> > + struct kref ced_refs;
> > + /* Link within the global chlg_registered_devices */
> > + struct list_head ced_link;
> > +};
> > +
> > +struct chlg_reader_state {
> > + /* Shortcut to the corresponding OBD device */
> > + struct obd_device *crs_obd;
> > + /* An error occurred that prevents from reading further */
> > + bool crs_err;
> > + /* EOF, no more records available */
> > + bool crs_eof;
> > + /* Userland reader closed connection */
> > + bool crs_closed;
> > + /* Desired start position */
> > + u64 crs_start_offset;
> > + /* Wait queue for the catalog processing thread */
> > + wait_queue_head_t crs_waitq_prod;
> > + /* Wait queue for the record copy threads */
> > + wait_queue_head_t crs_waitq_cons;
> > + /* Mutex protecting crs_rec_count and crs_rec_queue */
> > + struct mutex crs_lock;
> > + /* Number of item in the list */
> > + u64 crs_rec_count;
> > + /* List of prefetched enqueued_record::enq_linkage_items */
> > + struct list_head crs_rec_queue;
> > +};
> > +
> > +struct chlg_rec_entry {
> > + /* Link within the chlg_reader_state::crs_rec_queue list */
> > + struct list_head enq_linkage;
> > + /* Data (enq_record) field length */
> > + u64 enq_length;
> > + /* Copy of a changelog record (see struct llog_changelog_rec) */
> > + struct changelog_rec enq_record[];
> > +};
> > +
> > +enum {
> > + /* Number of records to prefetch locally. */
> > + CDEV_CHLG_MAX_PREFETCH = 1024,
> > +};
> > +
> > +/**
> > + * ChangeLog catalog processing callback invoked on each record.
> > + * If the current record is eligible to userland delivery, push
> > + * it into the crs_rec_queue where the consumer code will fetch it.
> > + *
> > + * @param[in] env (unused)
> > + * @param[in] llh Client-side handle used to identify the llog
> > + * @param[in] hdr Header of the current llog record
> > + * @param[in,out] data chlg_reader_state passed from caller
> > + *
> > + * @return 0 or LLOG_PROC_* control code on success, negated error on failure.
> > + */
> > +static int chlg_read_cat_process_cb(const struct lu_env *env,
> > + struct llog_handle *llh,
> > + struct llog_rec_hdr *hdr, void *data)
> > +{
> > + struct llog_changelog_rec *rec;
> > + struct chlg_reader_state *crs = data;
> > + struct chlg_rec_entry *enq;
> > + size_t len;
> > + int rc;
> > +
> > + LASSERT(crs);
> > + LASSERT(hdr);
> > +
> > + rec = container_of(hdr, struct llog_changelog_rec, cr_hdr);
> > +
> > + if (rec->cr_hdr.lrh_type != CHANGELOG_REC) {
> > + rc = -EINVAL;
> > + CERROR("%s: not a changelog rec %x/%d in llog : rc = %d\n",
> > + crs->crs_obd->obd_name, rec->cr_hdr.lrh_type,
> > + rec->cr.cr_type, rc);
> > + return rc;
> > + }
> > +
> > + /* Skip undesired records */
> > + if (rec->cr.cr_index < crs->crs_start_offset)
> > + return 0;
> > +
> > + CDEBUG(D_HSM, "%llu %02d%-5s %llu 0x%x t=" DFID " p=" DFID " %.*s\n",
> > + rec->cr.cr_index, rec->cr.cr_type,
> > + changelog_type2str(rec->cr.cr_type), rec->cr.cr_time,
> > + rec->cr.cr_flags & CLF_FLAGMASK,
> > + PFID(&rec->cr.cr_tfid), PFID(&rec->cr.cr_pfid),
> > + rec->cr.cr_namelen, changelog_rec_name(&rec->cr));
> > +
> > + wait_event_idle(crs->crs_waitq_prod,
> > + (crs->crs_rec_count < CDEV_CHLG_MAX_PREFETCH ||
> > + crs->crs_closed));
> > +
> > + if (crs->crs_closed)
> > + return LLOG_PROC_BREAK;
> > +
> > + len = changelog_rec_size(&rec->cr) + rec->cr.cr_namelen;
> > + enq = kzalloc(sizeof(*enq) + len, GFP_KERNEL);
> > + if (!enq)
> > + return -ENOMEM;
> > +
> > + INIT_LIST_HEAD(&enq->enq_linkage);
> > + enq->enq_length = len;
> > + memcpy(enq->enq_record, &rec->cr, len);
> > +
> > + mutex_lock(&crs->crs_lock);
> > + list_add_tail(&enq->enq_linkage, &crs->crs_rec_queue);
> > + crs->crs_rec_count++;
> > + mutex_unlock(&crs->crs_lock);
> > +
> > + wake_up_all(&crs->crs_waitq_cons);
> > +
> > + return 0;
> > +}
> > +
> > +/**
> > + * Remove record from the list it is attached to and free it.
> > + */
> > +static void enq_record_delete(struct chlg_rec_entry *rec)
> > +{
> > + list_del(&rec->enq_linkage);
> > + kfree(rec);
> > +}
> > +
> > +/**
> > + * Release resources associated to a changelog_reader_state instance.
> > + *
> > + * @param crs CRS instance to release.
> > + */
> > +static void crs_free(struct chlg_reader_state *crs)
> > +{
> > + struct chlg_rec_entry *rec;
> > + struct chlg_rec_entry *tmp;
> > +
> > + list_for_each_entry_safe(rec, tmp, &crs->crs_rec_queue, enq_linkage)
> > + enq_record_delete(rec);
> > +
> > + kfree(crs);
> > +}
> > +
> > +/**
> > + * Record prefetch thread entry point. Opens the changelog catalog and starts
> > + * reading records.
> > + *
> > + * @param[in,out] args chlg_reader_state passed from caller.
> > + * @return 0 on success, negated error code on failure.
> > + */
> > +static int chlg_load(void *args)
> > +{
> > + struct chlg_reader_state *crs = args;
> > + struct obd_device *obd = crs->crs_obd;
> > + struct llog_ctxt *ctx = NULL;
> > + struct llog_handle *llh = NULL;
> > + int rc;
> > +
> > + ctx = llog_get_context(obd, LLOG_CHANGELOG_REPL_CTXT);
> > + if (!ctx) {
> > + rc = -ENOENT;
> > + goto err_out;
> > + }
> > +
> > + rc = llog_open(NULL, ctx, &llh, NULL, CHANGELOG_CATALOG,
> > + LLOG_OPEN_EXISTS);
> > + if (rc) {
> > + CERROR("%s: fail to open changelog catalog: rc = %d\n",
> > + obd->obd_name, rc);
> > + goto err_out;
> > + }
> > +
> > + rc = llog_init_handle(NULL, llh, LLOG_F_IS_CAT | LLOG_F_EXT_JOBID,
> > + NULL);
> > + if (rc) {
> > + CERROR("%s: fail to init llog handle: rc = %d\n",
> > + obd->obd_name, rc);
> > + goto err_out;
> > + }
> > +
> > + rc = llog_cat_process(NULL, llh, chlg_read_cat_process_cb, crs, 0, 0);
> > + if (rc < 0) {
> > + CERROR("%s: fail to process llog: rc = %d\n",
> > + obd->obd_name, rc);
> > + goto err_out;
> > + }
> > +
> > +err_out:
> > + crs->crs_err = true;
> > + wake_up_all(&crs->crs_waitq_cons);
> > +
> > + if (llh)
> > + llog_cat_close(NULL, llh);
> > +
> > + if (ctx)
> > + llog_ctxt_put(ctx);
> > +
> > + wait_event_idle(crs->crs_waitq_prod, crs->crs_closed);
> > + crs_free(crs);
> > + return rc;
> > +}
> > +
> > +/**
> > + * Read handler, dequeues records from the chlg_reader_state if any.
> > + * No partial records are copied to userland so this function can return less
> > + * data than required (short read).
> > + *
> > + * @param[in] file File pointer to the character device.
> > + * @param[out] buff Userland buffer where to copy the records.
> > + * @param[in] count Userland buffer size.
> > + * @param[out] ppos File position, updated with the index number of the next
> > + * record to read.
> > + * @return number of copied bytes on success, negated error code on failure.
> > + */
> > +static ssize_t chlg_read(struct file *file, char __user *buff, size_t count,
> > + loff_t *ppos)
> > +{
> > + struct chlg_reader_state *crs = file->private_data;
> > + struct chlg_rec_entry *rec;
> > + struct chlg_rec_entry *tmp;
> > + ssize_t written_total = 0;
> > + LIST_HEAD(consumed);
> > +
> > + if (file->f_flags & O_NONBLOCK && crs->crs_rec_count == 0)
> > + return -EAGAIN;
> > +
> > + wait_event_idle(crs->crs_waitq_cons,
> > + crs->crs_rec_count > 0 || crs->crs_eof || crs->crs_err);
> > +
> > + mutex_lock(&crs->crs_lock);
> > + list_for_each_entry_safe(rec, tmp, &crs->crs_rec_queue, enq_linkage) {
> > + if (written_total + rec->enq_length > count)
> > + break;
> > +
> > + if (copy_to_user(buff, rec->enq_record, rec->enq_length)) {
> > + if (written_total == 0)
> > + written_total = -EFAULT;
> > + break;
> > + }
> > +
> > + buff += rec->enq_length;
> > + written_total += rec->enq_length;
> > +
> > + crs->crs_rec_count--;
> > + list_move_tail(&rec->enq_linkage, &consumed);
> > +
> > + crs->crs_start_offset = rec->enq_record->cr_index + 1;
> > + }
> > + mutex_unlock(&crs->crs_lock);
> > +
> > + if (written_total > 0)
> > + wake_up_all(&crs->crs_waitq_prod);
> > +
> > + list_for_each_entry_safe(rec, tmp, &consumed, enq_linkage)
> > + enq_record_delete(rec);
> > +
> > + *ppos = crs->crs_start_offset;
> > +
> > + return written_total;
> > +}
> > +
> > +/**
> > + * Jump to a given record index. Helper for chlg_llseek().
> > + *
> > + * @param[in,out] crs Internal reader state.
> > + * @param[in] offset Desired offset (index record).
> > + * @return 0 on success, negated error code on failure.
> > + */
> > +static int chlg_set_start_offset(struct chlg_reader_state *crs, u64 offset)
> > +{
> > + struct chlg_rec_entry *rec;
> > + struct chlg_rec_entry *tmp;
> > +
> > + mutex_lock(&crs->crs_lock);
> > + if (offset < crs->crs_start_offset) {
> > + mutex_unlock(&crs->crs_lock);
> > + return -ERANGE;
> > + }
> > +
> > + crs->crs_start_offset = offset;
> > + list_for_each_entry_safe(rec, tmp, &crs->crs_rec_queue, enq_linkage) {
> > + struct changelog_rec *cr = rec->enq_record;
> > +
> > + if (cr->cr_index >= crs->crs_start_offset)
> > + break;
> > +
> > + crs->crs_rec_count--;
> > + enq_record_delete(rec);
> > + }
> > +
> > + mutex_unlock(&crs->crs_lock);
> > + wake_up_all(&crs->crs_waitq_prod);
> > + return 0;
> > +}
> > +
> > +/**
> > + * Move read pointer to a certain record index, encoded as an offset.
> > + *
> > + * @param[in,out] file File pointer to the changelog character device
> > + * @param[in] off Offset to skip, actually a record index, not byte count
> > + * @param[in] whence Relative/Absolute interpretation of the offset
> > + * @return the resulting position on success or negated error code on failure.
> > + */
> > +static loff_t chlg_llseek(struct file *file, loff_t off, int whence)
> > +{
> > + struct chlg_reader_state *crs = file->private_data;
> > + loff_t pos;
> > + int rc;
> > +
> > + switch (whence) {
> > + case SEEK_SET:
> > + pos = off;
> > + break;
> > + case SEEK_CUR:
> > + pos = file->f_pos + off;
> > + break;
> > + case SEEK_END:
> > + default:
> > + return -EINVAL;
> > + }
> > +
> > + /* We cannot go backward */
> > + if (pos < file->f_pos)
> > + return -EINVAL;
> > +
> > + rc = chlg_set_start_offset(crs, pos);
> > + if (rc != 0)
> > + return rc;
> > +
> > + file->f_pos = pos;
> > + return pos;
> > +}
> > +
> > +/**
> > + * Clear record range for a given changelog reader.
> > + *
> > + * @param[in] crs Current internal state.
> > + * @param[in] reader Changelog reader ID (cl1, cl2...)
> > + * @param[in] record Record index up which to clear
> > + * @return 0 on success, negated error code on failure.
> > + */
> > +static int chlg_clear(struct chlg_reader_state *crs, u32 reader, u64 record)
> > +{
> > + struct obd_device *obd = crs->crs_obd;
> > + struct changelog_setinfo cs = {
> > + .cs_recno = record,
> > + .cs_id = reader
> > + };
> > +
> > + return obd_set_info_async(NULL, obd->obd_self_export,
> > + strlen(KEY_CHANGELOG_CLEAR),
> > + KEY_CHANGELOG_CLEAR, sizeof(cs), &cs, NULL);
> > +}
> > +
> > +/** Maximum changelog control command size */
> > +#define CHLG_CONTROL_CMD_MAX 64
> > +
> > +/**
> > + * Handle writes() into the changelog character device. Write() can be used
> > + * to request special control operations.
> > + *
> > + * @param[in] file File pointer to the changelog character device
> > + * @param[in] buff User supplied data (written data)
> > + * @param[in] count Number of written bytes
> > + * @param[in] off (unused)
> > + * @return number of written bytes on success, negated error code on failure.
> > + */
> > +static ssize_t chlg_write(struct file *file, const char __user *buff,
> > + size_t count, loff_t *off)
> > +{
> > + struct chlg_reader_state *crs = file->private_data;
> > + char *kbuf;
> > + u64 record;
> > + u32 reader;
> > + int rc = 0;
> > +
> > + if (count > CHLG_CONTROL_CMD_MAX)
> > + return -EINVAL;
> > +
> > + kbuf = kzalloc(CHLG_CONTROL_CMD_MAX, GFP_KERNEL);
> > + if (!kbuf)
> > + return -ENOMEM;
> > +
> > + if (copy_from_user(kbuf, buff, count)) {
> > + rc = -EFAULT;
> > + goto out_kbuf;
> > + }
> > +
> > + kbuf[CHLG_CONTROL_CMD_MAX - 1] = '\0';
> > +
> > + if (sscanf(kbuf, "clear:cl%u:%llu", &reader, &record) == 2)
> > + rc = chlg_clear(crs, reader, record);
> > + else
> > + rc = -EINVAL;
> > +
> > +out_kbuf:
> > + kfree(kbuf);
> > + return rc < 0 ? rc : count;
> > +}
> > +
> > +/**
> > + * Find the OBD device associated to a changelog character device.
> > + * @param[in] cdev character device instance descriptor
> > + * @return corresponding OBD device or NULL if none was found.
> > + */
> > +static struct obd_device *chlg_obd_get(dev_t cdev)
> > +{
> > + int minor = MINOR(cdev);
> > + struct obd_device *obd = NULL;
> > + struct chlg_registered_dev *curr;
> > +
> > + mutex_lock(&chlg_registered_dev_lock);
> > + list_for_each_entry(curr, &chlg_registered_devices, ced_link) {
> > + if (curr->ced_misc.minor == minor) {
> > + /* take the first available OBD device attached */
> > + obd = list_first_entry(&curr->ced_obds,
> > + struct obd_device,
> > + u.cli.cl_chg_dev_linkage);
> > + break;
> > + }
> > + }
> > + mutex_unlock(&chlg_registered_dev_lock);
> > + return obd;
> > +}
> > +
> > +/**
> > + * Open handler, initialize internal CRS state and spawn prefetch thread if
> > + * needed.
> > + * @param[in] inode Inode struct for the open character device.
> > + * @param[in] file Corresponding file pointer.
> > + * @return 0 on success, negated error code on failure.
> > + */
> > +static int chlg_open(struct inode *inode, struct file *file)
> > +{
> > + struct chlg_reader_state *crs;
> > + struct obd_device *obd = chlg_obd_get(inode->i_rdev);
> > + struct task_struct *task;
> > + int rc;
> > +
> > + if (!obd)
> > + return -ENODEV;
> > +
> > + crs = kzalloc(sizeof(*crs), GFP_KERNEL);
> > + if (!crs)
> > + return -ENOMEM;
> > +
> > + crs->crs_obd = obd;
> > + crs->crs_err = false;
> > + crs->crs_eof = false;
> > + crs->crs_closed = false;
> > +
> > + mutex_init(&crs->crs_lock);
> > + INIT_LIST_HEAD(&crs->crs_rec_queue);
> > + init_waitqueue_head(&crs->crs_waitq_prod);
> > + init_waitqueue_head(&crs->crs_waitq_cons);
> > +
> > + if (file->f_mode & FMODE_READ) {
> > + task = kthread_run(chlg_load, crs, "chlg_load_thread");
> > + if (IS_ERR(task)) {
> > + rc = PTR_ERR(task);
> > + CERROR("%s: cannot start changelog thread: rc = %d\n",
> > + obd->obd_name, rc);
> > + goto err_crs;
> > + }
> > + }
> > +
> > + file->private_data = crs;
> > + return 0;
> > +
> > +err_crs:
> > + kfree(crs);
> > + return rc;
> > +}
> > +
> > +/**
> > + * Close handler, release resources.
> > + *
> > + * @param[in] inode Inode struct for the open character device.
> > + * @param[in] file Corresponding file pointer.
> > + * @return 0 on success, negated error code on failure.
> > + */
> > +static int chlg_release(struct inode *inode, struct file *file)
> > +{
> > + struct chlg_reader_state *crs = file->private_data;
> > +
> > + if (file->f_mode & FMODE_READ) {
> > + crs->crs_closed = true;
> > + wake_up_all(&crs->crs_waitq_prod);
> > + } else {
> > + /* No producer thread, release resource ourselves */
> > + crs_free(crs);
> > + }
> > + return 0;
> > +}
> > +
> > +/**
> > + * Poll handler, indicates whether the device is readable (new records) and
> > + * writable (always).
> > + *
> > + * @param[in] file Device file pointer.
> > + * @param[in] wait (opaque)
> > + * @return combination of the poll status flags.
> > + */
> > +static unsigned int chlg_poll(struct file *file, poll_table *wait)
> > +{
> > + struct chlg_reader_state *crs = file->private_data;
> > + unsigned int mask = 0;
> > +
> > + mutex_lock(&crs->crs_lock);
> > + poll_wait(file, &crs->crs_waitq_cons, wait);
> > + if (crs->crs_rec_count > 0)
> > + mask |= POLLIN | POLLRDNORM;
> > + if (crs->crs_err)
> > + mask |= POLLERR;
> > + if (crs->crs_eof)
> > + mask |= POLLHUP;
> > + mutex_unlock(&crs->crs_lock);
> > + return mask;
> > +}
> > +
> > +static const struct file_operations chlg_fops = {
> > + .owner = THIS_MODULE,
> > + .llseek = chlg_llseek,
> > + .read = chlg_read,
> > + .write = chlg_write,
> > + .open = chlg_open,
> > + .release = chlg_release,
> > + .poll = chlg_poll,
> > +};
> > +
> > +/**
> > + * This uses obd_name of the form: "testfs-MDT0000-mdc-ffff88006501600"
> > + * and returns a name of the form: "changelog-testfs-MDT0000".
> > + */
> > +static void get_chlg_name(char *name, size_t name_len, struct obd_device *obd)
> > +{
> > + int i;
> > +
> > + snprintf(name, name_len, "changelog-%s", obd->obd_name);
> > +
> > + /* Find the 2nd '-' from the end and truncate on it */
> > + for (i = 0; i < 2; i++) {
> > + char *p = strrchr(name, '-');
> > +
> > + if (!p)
> > + return;
> > + *p = '\0';
> > + }
> > +}
> > +
> > +/**
> > + * Find a changelog character device by name.
> > + * All devices registered during MDC setup are listed in a global list with
> > + * their names attached.
> > + */
> > +static struct chlg_registered_dev *
> > +chlg_registered_dev_find_by_name(const char *name)
> > +{
> > + struct chlg_registered_dev *dit;
> > +
> > + list_for_each_entry(dit, &chlg_registered_devices, ced_link)
> > + if (strcmp(name, dit->ced_name) == 0)
> > + return dit;
> > + return NULL;
> > +}
> > +
> > +/**
> > + * Find chlg_registered_dev structure for a given OBD device.
> > + * This is bad O(n^2) but for each filesystem:
> > + * - N is # of MDTs times # of mount points
> > + * - this only runs at shutdown
> > + */
> > +static struct chlg_registered_dev *
> > +chlg_registered_dev_find_by_obd(const struct obd_device *obd)
> > +{
> > + struct chlg_registered_dev *dit;
> > + struct obd_device *oit;
> > +
> > + list_for_each_entry(dit, &chlg_registered_devices, ced_link)
> > + list_for_each_entry(oit, &dit->ced_obds,
> > + u.cli.cl_chg_dev_linkage)
> > + if (oit == obd)
> > + return dit;
> > + return NULL;
> > +}
> > +
> > +/**
> > + * Changelog character device initialization.
> > + * Register a misc character device with a dynamic minor number, under a name
> > + * of the form: 'changelog-fsname-MDTxxxx'. Reference this OBD device with it.
> > + *
> > + * @param[in] obd This MDC obd_device.
> > + * @return 0 on success, negated error code on failure.
> > + */
> > +int mdc_changelog_cdev_init(struct obd_device *obd)
> > +{
> > + struct chlg_registered_dev *exist;
> > + struct chlg_registered_dev *entry;
> > + int rc;
> > +
> > + entry = kzalloc(sizeof(*entry), GFP_KERNEL);
> > + if (!entry)
> > + return -ENOMEM;
> > +
> > + get_chlg_name(entry->ced_name, sizeof(entry->ced_name), obd);
> > +
> > + entry->ced_misc.minor = MISC_DYNAMIC_MINOR;
> > + entry->ced_misc.name = entry->ced_name;
> > + entry->ced_misc.fops = &chlg_fops;
> > +
> > + kref_init(&entry->ced_refs);
> > + INIT_LIST_HEAD(&entry->ced_obds);
> > + INIT_LIST_HEAD(&entry->ced_link);
> > +
> > + mutex_lock(&chlg_registered_dev_lock);
> > + exist = chlg_registered_dev_find_by_name(entry->ced_name);
> > + if (exist) {
> > + kref_get(&exist->ced_refs);
> > + list_add_tail(&obd->u.cli.cl_chg_dev_linkage, &exist->ced_obds);
> > + rc = 0;
> > + goto out_unlock;
> > + }
> > +
> > + /* Register new character device */
> > + rc = misc_register(&entry->ced_misc);
> > + if (rc != 0)
> > + goto out_unlock;
> > +
> > + list_add_tail(&obd->u.cli.cl_chg_dev_linkage, &entry->ced_obds);
> > + list_add_tail(&entry->ced_link, &chlg_registered_devices);
> > +
> > + entry = NULL; /* prevent it from being freed below */
> > +
> > +out_unlock:
> > + mutex_unlock(&chlg_registered_dev_lock);
> > + kfree(entry);
> > + return rc;
> > +}
> > +
> > +/**
> > + * Deregister a changelog character device whose refcount has reached zero.
> > + */
> > +static void chlg_dev_clear(struct kref *kref)
> > +{
> > + struct chlg_registered_dev *entry = container_of(kref,
> > + struct chlg_registered_dev,
> > + ced_refs);
> > + list_del(&entry->ced_link);
> > + misc_deregister(&entry->ced_misc);
> > + kfree(entry);
> > +}
> > +
> > +/**
> > + * Release OBD, decrease reference count of the corresponding changelog device.
> > + */
> > +void mdc_changelog_cdev_finish(struct obd_device *obd)
> > +{
> > + struct chlg_registered_dev *dev = chlg_registered_dev_find_by_obd(obd);
> > +
> > + mutex_lock(&chlg_registered_dev_lock);
> > + list_del_init(&obd->u.cli.cl_chg_dev_linkage);
> > + kref_put(&dev->ced_refs, chlg_dev_clear);
> > + mutex_unlock(&chlg_registered_dev_lock);
> > +}
> > diff --git a/drivers/staging/lustre/lustre/mdc/mdc_internal.h b/drivers/staging/lustre/lustre/mdc/mdc_internal.h
> > index 941a896..6da9046 100644
> > --- a/drivers/staging/lustre/lustre/mdc/mdc_internal.h
> > +++ b/drivers/staging/lustre/lustre/mdc/mdc_internal.h
> > @@ -129,6 +129,10 @@ enum ldlm_mode mdc_lock_match(struct obd_export *exp, __u64 flags,
> > enum ldlm_mode mode,
> > struct lustre_handle *lockh);
> >
> > +int mdc_changelog_cdev_init(struct obd_device *obd);
> > +
> > +void mdc_changelog_cdev_finish(struct obd_device *obd);
> > +
> > static inline int mdc_prep_elc_req(struct obd_export *exp,
> > struct ptlrpc_request *req, int opc,
> > struct list_head *cancels, int count)
> > diff --git a/drivers/staging/lustre/lustre/mdc/mdc_request.c b/drivers/staging/lustre/lustre/mdc/mdc_request.c
> > index 8f8e3d2..3692b1c 100644
> > --- a/drivers/staging/lustre/lustre/mdc/mdc_request.c
> > +++ b/drivers/staging/lustre/lustre/mdc/mdc_request.c
> > @@ -35,7 +35,6 @@
> >
> > # include <linux/module.h>
> > # include <linux/pagemap.h>
> > -# include <linux/miscdevice.h>
> > # include <linux/init.h>
> > # include <linux/utsname.h>
> > # include <linux/file.h>
> > @@ -1810,174 +1809,6 @@ static int mdc_ioc_hsm_request(struct obd_export *exp,
> > return rc;
> > }
> >
> > -static struct kuc_hdr *changelog_kuc_hdr(char *buf, size_t len, u32 flags)
> > -{
> > - struct kuc_hdr *lh = (struct kuc_hdr *)buf;
> > -
> > - LASSERT(len <= KUC_CHANGELOG_MSG_MAXSIZE);
> > -
> > - lh->kuc_magic = KUC_MAGIC;
> > - lh->kuc_transport = KUC_TRANSPORT_CHANGELOG;
> > - lh->kuc_flags = flags;
> > - lh->kuc_msgtype = CL_RECORD;
> > - lh->kuc_msglen = len;
> > - return lh;
> > -}
> > -
> > -struct changelog_show {
> > - __u64 cs_startrec;
> > - enum changelog_send_flag cs_flags;
> > - struct file *cs_fp;
> > - char *cs_buf;
> > - struct obd_device *cs_obd;
> > -};
> > -
> > -static inline char *cs_obd_name(struct changelog_show *cs)
> > -{
> > - return cs->cs_obd->obd_name;
> > -}
> > -
> > -static int changelog_kkuc_cb(const struct lu_env *env, struct llog_handle *llh,
> > - struct llog_rec_hdr *hdr, void *data)
> > -{
> > - struct changelog_show *cs = data;
> > - struct llog_changelog_rec *rec = (struct llog_changelog_rec *)hdr;
> > - struct kuc_hdr *lh;
> > - size_t len;
> > - int rc;
> > -
> > - if (rec->cr_hdr.lrh_type != CHANGELOG_REC) {
> > - rc = -EINVAL;
> > - CERROR("%s: not a changelog rec %x/%d: rc = %d\n",
> > - cs_obd_name(cs), rec->cr_hdr.lrh_type,
> > - rec->cr.cr_type, rc);
> > - return rc;
> > - }
> > -
> > - if (rec->cr.cr_index < cs->cs_startrec) {
> > - /* Skip entries earlier than what we are interested in */
> > - CDEBUG(D_HSM, "rec=%llu start=%llu\n",
> > - rec->cr.cr_index, cs->cs_startrec);
> > - return 0;
> > - }
> > -
> > - CDEBUG(D_HSM, "%llu %02d%-5s %llu 0x%x t=" DFID " p=" DFID
> > - " %.*s\n", rec->cr.cr_index, rec->cr.cr_type,
> > - changelog_type2str(rec->cr.cr_type), rec->cr.cr_time,
> > - rec->cr.cr_flags & CLF_FLAGMASK,
> > - PFID(&rec->cr.cr_tfid), PFID(&rec->cr.cr_pfid),
> > - rec->cr.cr_namelen, changelog_rec_name(&rec->cr));
> > -
> > - len = sizeof(*lh) + changelog_rec_size(&rec->cr) + rec->cr.cr_namelen;
> > -
> > - /* Set up the message */
> > - lh = changelog_kuc_hdr(cs->cs_buf, len, cs->cs_flags);
> > - memcpy(lh + 1, &rec->cr, len - sizeof(*lh));
> > -
> > - rc = libcfs_kkuc_msg_put(cs->cs_fp, lh);
> > - CDEBUG(D_HSM, "kucmsg fp %p len %zu rc %d\n", cs->cs_fp, len, rc);
> > -
> > - return rc;
> > -}
> > -
> > -static int mdc_changelog_send_thread(void *csdata)
> > -{
> > - enum llog_flag flags = LLOG_F_IS_CAT;
> > - struct changelog_show *cs = csdata;
> > - struct llog_ctxt *ctxt = NULL;
> > - struct llog_handle *llh = NULL;
> > - struct kuc_hdr *kuch;
> > - int rc;
> > -
> > - CDEBUG(D_HSM, "changelog to fp=%p start %llu\n",
> > - cs->cs_fp, cs->cs_startrec);
> > -
> > - cs->cs_buf = kzalloc(KUC_CHANGELOG_MSG_MAXSIZE, GFP_NOFS);
> > - if (!cs->cs_buf) {
> > - rc = -ENOMEM;
> > - goto out;
> > - }
> > -
> > - /* Set up the remote catalog handle */
> > - ctxt = llog_get_context(cs->cs_obd, LLOG_CHANGELOG_REPL_CTXT);
> > - if (!ctxt) {
> > - rc = -ENOENT;
> > - goto out;
> > - }
> > - rc = llog_open(NULL, ctxt, &llh, NULL, CHANGELOG_CATALOG,
> > - LLOG_OPEN_EXISTS);
> > - if (rc) {
> > - CERROR("%s: fail to open changelog catalog: rc = %d\n",
> > - cs_obd_name(cs), rc);
> > - goto out;
> > - }
> > -
> > - if (cs->cs_flags & CHANGELOG_FLAG_JOBID)
> > - flags |= LLOG_F_EXT_JOBID;
> > -
> > - rc = llog_init_handle(NULL, llh, flags, NULL);
> > - if (rc) {
> > - CERROR("llog_init_handle failed %d\n", rc);
> > - goto out;
> > - }
> > -
> > - rc = llog_cat_process(NULL, llh, changelog_kkuc_cb, cs, 0, 0);
> > -
> > - /* Send EOF no matter what our result */
> > - kuch = changelog_kuc_hdr(cs->cs_buf, sizeof(*kuch), cs->cs_flags);
> > - kuch->kuc_msgtype = CL_EOF;
> > - libcfs_kkuc_msg_put(cs->cs_fp, kuch);
> > -
> > -out:
> > - fput(cs->cs_fp);
> > - if (llh)
> > - llog_cat_close(NULL, llh);
> > - if (ctxt)
> > - llog_ctxt_put(ctxt);
> > - kfree(cs->cs_buf);
> > - kfree(cs);
> > - return rc;
> > -}
> > -
> > -static int mdc_ioc_changelog_send(struct obd_device *obd,
> > - struct ioc_changelog *icc)
> > -{
> > - struct changelog_show *cs;
> > - struct task_struct *task;
> > - int rc;
> > -
> > - /* Freed in mdc_changelog_send_thread */
> > - cs = kzalloc(sizeof(*cs), GFP_NOFS);
> > - if (!cs)
> > - return -ENOMEM;
> > -
> > - cs->cs_obd = obd;
> > - cs->cs_startrec = icc->icc_recno;
> > - /* matching fput in mdc_changelog_send_thread */
> > - cs->cs_fp = fget(icc->icc_id);
> > - cs->cs_flags = icc->icc_flags;
> > -
> > - /*
> > - * New thread because we should return to user app before
> > - * writing into our pipe
> > - */
> > - task = kthread_run(mdc_changelog_send_thread, cs,
> > - "mdc_clg_send_thread");
> > - if (IS_ERR(task)) {
> > - rc = PTR_ERR(task);
> > - CERROR("%s: can't start changelog thread: rc = %d\n",
> > - cs_obd_name(cs), rc);
> > - kfree(cs);
> > - } else {
> > - rc = 0;
> > - CDEBUG(D_HSM, "%s: started changelog thread\n",
> > - cs_obd_name(cs));
> > - }
> > -
> > - CERROR("Failed to start changelog thread: %d\n", rc);
> > - return rc;
> > -}
> > -
> > static int mdc_ioc_hsm_ct_start(struct obd_export *exp,
> > struct lustre_kernelcomm *lk);
> >
> > @@ -2087,21 +1918,6 @@ static int mdc_iocontrol(unsigned int cmd, struct obd_export *exp, int len,
> > return -EINVAL;
> > }
> > switch (cmd) {
> > - case OBD_IOC_CHANGELOG_SEND:
> > - rc = mdc_ioc_changelog_send(obd, karg);
> > - goto out;
> > - case OBD_IOC_CHANGELOG_CLEAR: {
> > - struct ioc_changelog *icc = karg;
> > - struct changelog_setinfo cs = {
> > - .cs_recno = icc->icc_recno,
> > - .cs_id = icc->icc_id
> > - };
> > -
> > - rc = obd_set_info_async(NULL, exp, strlen(KEY_CHANGELOG_CLEAR),
> > - KEY_CHANGELOG_CLEAR, sizeof(cs), &cs,
> > - NULL);
> > - goto out;
> > - }
> > case OBD_IOC_FID2PATH:
> > rc = mdc_ioc_fid2path(exp, karg);
> > goto out;
> > @@ -2670,12 +2486,22 @@ static int mdc_setup(struct obd_device *obd, struct lustre_cfg *cfg)
> >
> > rc = mdc_llog_init(obd);
> > if (rc) {
> > - CERROR("failed to setup llogging subsystems\n");
> > + CERROR("%s: failed to setup llogging subsystems: rc = %d\n",
> > + obd->obd_name, rc);
> > goto err_llog_cleanup;
> > }
> >
> > + rc = mdc_changelog_cdev_init(obd);
> > + if (rc) {
> > + CERROR("%s: failed to setup changelog char device: rc = %d\n",
> > + obd->obd_name, rc);
> > + goto err_changelog_cleanup;
> > + }
> > +
> > return 0;
> >
> > +err_changelog_cleanup:
> > + mdc_llog_finish(obd);
> > err_llog_cleanup:
> > ldebugfs_free_md_stats(obd);
> > ptlrpc_lprocfs_unregister_obd(obd);
> > @@ -2714,6 +2540,8 @@ static int mdc_precleanup(struct obd_device *obd)
> > if (obd->obd_type->typ_refcnt <= 1)
> > libcfs_kkuc_group_rem(0, KUC_GRP_HSM);
> >
> > + mdc_changelog_cdev_finish(obd);
> > +
> > obd_cleanup_client_import(obd);
> > ptlrpc_lprocfs_unregister_obd(obd);
> > lprocfs_obd_cleanup(obd);
> > --
> > 1.8.3.1
>
More information about the lustre-devel
mailing list