[Lustre-discuss] Sorry I suspect this is a repeat

[David Fagan]

but isn't there a forum vs a message list, anyhow...

I just don't see in the documentation how to build one large file  
system across multiple systems I need PB filesystems.

I have two system to play with each with about 36TB on them and I  
want one large filesystem.
I have /dev/sdb on each for msg
and 4 8TB luns on each for a file system /dev/sdc, sdd, sde, sdf
Since this is ext2 it's EXTREMELY painful to format these and trial  
and error is a pain.
I got one 36TB filesystem on one system and mounted to both but I  
want to wipe that out and put them together.
Can do the same thing on both system but how do they know to put  
there together into one big 72TB vs each having a 36TB filesystem.    
Will this just work because of the mgsnode if they are pointing to  
the same node?

Start this on both nodes and go home for the day?

mkfs.lustre --fsname datafs --mdt --mgs --reformat /dev/sdb
mkdir -p /lustre/mdt/data1
mount -t lustre /dev/sdb /lustre/mdt/data1

mkfs.lustre --fsname datafs --ost --reformat -- 
mgsnode=cmsstor90 at tcp0 /dev/sdc
mkfs.lustre --fsname datafs --ost --reformat -- 
mgsnode=cmsstor90 at tcp0 /dev/sdd
mkfs.lustre --fsname datafs --ost --reformat -- 
mgsnode=cmsstor90 at tcp0 /dev/sde
mkfs.lustre --fsname datafs --ost --reformat -- 
mgsnode=cmsstor90 at tcp0 /dev/sdf
mkdir -p /lustre/ost/data1/0
mkdir -p /lustre/ost/data1/1
mkdir -p /lustre/ost/data1/2
mkdir -p /lustre/ost/data1/3
mount -t lustre /dev/sdc /lustre/ost/data1/0
mount -t lustre /dev/sdd /lustre/ost/data1/1
mount -t lustre /dev/sde /lustre/ost/data1/2
mount -t lustre /dev/sdf /lustre/ost/data1/3

mkdir -p /lustre/data1
mount -t lustre cmsstor90 at tcp0:/datafs /lustre/data1