[Lustre-discuss] Infiband to TCP router

[Aaron Lauer]

Thx for input. 

Manual didn't answer my routing question, but it turns out I didn't need to go down the routing path. Running a tunefs.lustre and adding the TCP NID on all the OSTs and clearing the log of the MDT solved the problem.

Aaron Lauer
IT Engineer
Digitalsmiths
www.digitalsmiths.com
(O) 919.460.4747 x 216
(M) 919.323.5918


-----Original Message-----
From: lustre-discuss-bounces at lists.lustre.org [mailto:lustre-discuss-bounces at lists.lustre.org] On Behalf Of Brian J. Murrell
Sent: Monday, August 17, 2009 7:37 PM
To: lustre-discuss at lists.lustre.org
Subject: Re: [Lustre-discuss] Infiband to TCP router

On Mon, 2009-08-17 at 17:21 -0400, Aaron Lauer wrote:
> We have Lustre test lab configured using 3 OSS and 1 MGS/MDS connected 
> over Infiniband and ethernet. How do you configure a LNET router to 
> allow non IB servers to access Lustre over TCP?

There is a whole section of the manual (manual.lustre.org) dedicated to routing.  Please let us know if that does not answer your questions.

b.