[Lustre-discuss] tcp0 for maximum effect
Arden Wiebe
albert682 at yahoo.com
Sat Jan 10 18:14:01 PST 2009
I have two boxes that have this:
[root at lustrethree Desktop]# ifconfig
eth0 Link encap:Ethernet HWaddr 00:1B:21:2A:17:76
inet addr:192.168.0.19 Bcast:192.168.0.255 Mask:255.255.255.0
inet6 addr: fe80::21b:21ff:fe2a:1776/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:1501960 errors:0 dropped:0 overruns:0 frame:0
TX packets:3792561 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:120168321 (114.6 MiB) TX bytes:5300070662 (4.9 GiB)
Base address:0xec00 Memory:febe0000-fec00000
eth1 Link encap:Ethernet HWaddr 00:1B:21:2A:1C:DC
inet addr:192.168.0.20 Bcast:192.168.0.255 Mask:255.255.255.0
inet6 addr: fe80::21b:21ff:fe2a:1cdc/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:828283 errors:0 dropped:0 overruns:0 frame:0
TX packets:12 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:55673426 (53.0 MiB) TX bytes:846 (846.0 b)
Base address:0xe880 Memory:feb80000-feba0000
eth2 Link encap:Ethernet HWaddr 00:22:15:06:3A:0F
inet addr:192.168.0.21 Bcast:192.168.0.255 Mask:255.255.255.0
inet6 addr: fe80::222:15ff:fe06:3a0f/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:828047 errors:0 dropped:0 overruns:0 frame:0
TX packets:11 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:55657196 (53.0 MiB) TX bytes:782 (782.0 b)
Interrupt:185
eth3 Link encap:Ethernet HWaddr 00:22:15:06:3A:10
inet addr:192.168.0.22 Bcast:192.168.0.255 Mask:255.255.255.0
inet6 addr: fe80::222:15ff:fe06:3a10/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:827857 errors:0 dropped:0 overruns:0 frame:0
TX packets:11 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:55644744 (53.0 MiB) TX bytes:782 (782.0 b)
Interrupt:209
eth4 Link encap:Ethernet HWaddr 00:22:15:06:3A:11
inet addr:192.168.0.23 Bcast:192.168.0.255 Mask:255.255.255.0
inet6 addr: fe80::222:15ff:fe06:3a11/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:827706 errors:0 dropped:0 overruns:0 frame:0
TX packets:11 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:55634788 (53.0 MiB) TX bytes:782 (782.0 b)
Interrupt:169
eth5 Link encap:Ethernet HWaddr 00:22:15:06:3A:12
inet addr:192.168.0.24 Bcast:192.168.0.255 Mask:255.255.255.0
inet6 addr: fe80::222:15ff:fe06:3a12/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:827519 errors:0 dropped:0 overruns:0 frame:0
TX packets:11 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:55622528 (53.0 MiB) TX bytes:782 (782.0 b)
Interrupt:193
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:1485135 errors:0 dropped:0 overruns:0 frame:0
TX packets:1485135 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:5089873659 (4.7 GiB) TX bytes:5089873659 (4.7 GiB)
[root at lustrethree Desktop]#
Would it be better to have these two boxes as OSS's or as MDT or MGS machines? Currently they are configured 1 as a MGS and the other as the MDT. The question is does LNET use the available tcp0 connections different from the OSS perspective as opposed to the MDT or MGS perspective?
More information about the lustre-discuss
mailing list