[Lustre-discuss] How to use the openSuse 10.3 kernel.
Arden Wiebe
albert682 at yahoo.com
Sun Jan 11 20:36:11 PST 2009
There was the mkinitrd command issued. Notice there is a difference in loaded modules but none that I would suspect making the system still hang looking for a Want me to fall back to /dev/disk/by-id/scsi-SATA y/n error. Trying a clean install again with slightly different bios settings. Oh those are set for ahci in the bios as it doesn't find any drives without.
lustrethree:/boot # mkinitrd
Kernel image: /boot/vmlinuz-2.6.16.60-0.27_lustre.1.6.6-smp
Initrd image: /boot/initrd-2.6.16.60-0.27_lustre.1.6.6-smp
Root device: /dev/disk/by-id/scsi-SATA_SAMSUNG_HD103UJS13PJDWQA29776-part1 (/ dev/sda1) (mounted on / as ext3)
Kernel Modules: processor thermal scsi_mod libata ahci pata_marvell fan jbd ext3 edd sd_mod usbcore ohci-hcd uhci-hcd ehci-hcd usbhid
Features: block usb resume.userspace resume.kernel
Bootsplash: SuSE (1280x1024)
49142 blocks
Kernel image: /boot/vmlinuz-2.6.22.5-31-default
Initrd image: /boot/initrd-2.6.22.5-31-default
Root device: /dev/disk/by-id/scsi-SATA_SAMSUNG_HD103UJS13PJDWQA29776-part1 (/dev/sda1) (mounted on / as ext3)
Kernel Modules: processor thermal scsi_mod libata ahci pata_marvell fan jbd mbcache ext3 edd sd_mod usbcore ohci-hcd uhci-hcd ehci-hcd ff-memless hid usbhid
Features: block usb resume.userspace resume.kernel
Bootsplash: SuSE (1280x1024)
25990 blocks
lustrethree:/boot #
--- On Sun, 1/11/09, Arden Wiebe <albert682 at yahoo.com> wrote:
From: Arden Wiebe <albert682 at yahoo.com>
Subject: Re: [Lustre-discuss] How to use the openSuse 10.3 kernel.
To: "Guido Juckeland" <guido.juckeland at tu-dresden.de>, lustre-discuss at lists.Lustre.org
Date: Sunday, January 11, 2009, 6:28 PM
Here is what I have done to try and get it working on this box:
lustrethree:~/Desktop # rpm -ivh kernel-lustre-smp-2.6.16-60_0.27_lustre.1.6.6.x86_64.rpm
Preparing... ########################################### [100%]
package kernel-lustre-smp-2.6.16-60_0.27_lustre.1.6.6 is already installed
lustrethree:~/Desktop # rpm -ivh lustre-ldiskfs-3.0.6-2.6.16.60_0.27_lustre.1.6.6_smp.x86_64.rpm
Preparing... ########################################### [100%]
package lustre-ldiskfs-3.0.6-2.6.16.60_0.27_lustre.1.6.6_smp is already installed
lustrethree:~/Desktop # rpm -ivh
lustre-modules-1.6.6-2.6.16.60_0.27_lustre.1.6.6_smp.x86_64.rpm
Preparing... ########################################### [100%]
package lustre-modules-1.6.6-2.6.16.60_0.27_lustre.1.6.6_smp is already installed
lustrethree:~/Desktop # rpm -ivh lustre-1.6.6-2.6.16.60_0.27_lustre.1.6.6_smp.x86_64.rpm
Preparing... ########################################### [100%]
package lustre-1.6.6-2.6.16.60_0.27_lustre.1.6.6_smp is already installed
lustrethree:~/Desktop #
First have to solve for the dependency. Downloaded from http://rpmfind.net//linux/RPM/opensuse/10.3/x86_64/db43-4.3.29-59.x86_64.html
for future reference.
lustrethree:~/Desktop # rpm -ivh
db43-4.3.29-59.x86_64.rpm
Preparing... ########################################### [100%]
1:db43 ########################################### [100%]
lustrethree:~/Desktop # rpm --force -Uvh e2fsprogs-1.40.11.sun1-0suse.sles10.x86_64.rpm
Preparing... ########################################### [100%]
1:e2fsprogs ########################################### [100%]
lustrethree:~/Desktop #
Reboot and cross fingers.
--- On Sun, 1/11/09, Arden Wiebe <albert682 at yahoo.com> wrote:
From: Arden Wiebe <albert682 at yahoo.com>
Subject: Re: [Lustre-discuss] How to use the openSuse 10.3 kernel.
To: "Guido Juckeland" <guido.juckeland at tu-dresden.de>, lustre-discuss at lists.Lustre.org
Date: Sunday, January 11, 2009, 5:11 PM
After doing a mkinitrd and rebooting I still fail to load the lustre openSuse 10.3 kernel. It fails when asking:
Want me to fall back to /dev/disk/by-id/scsi-SATA y/n
I have tried editing my fstab and menu.lst file. Is there anything else I must edit?
lustrefour:~ # cat /etc/fstab
/dev/sda1
/ ext3 acl,user_xattr 1 1
proc /proc proc
defaults 0 0
sysfs /sys sysfs noauto 0 0
debugfs /sys/kernel/debug debugfs noauto 0 0
usbfs /proc/bus/usb usbfs noauto
0 0
devpts /dev/pts devpts mode=0620,gid=5 0 0
/dev/fd0 /media/floppy auto noauto,user,sync 0 0
lustrefour:~ #
# Modified by YaST2. Last modification on Sun Jan 11 20:54:40 UTC 2009
default 0
timeout 8
##YaST - generic_mbr
gfxmenu (hd0,0)/boot/message
##YaST - activate
###Don't change this comment - YaST2 identifier: Original name: lustre###
title lustre
root (hd0,0)
kernel /boot/vmlinuz-2.6.16.60-0.27_lustre.1.6.6-smp root=/dev/sda1 vga=0x317 splash=silent
showopts
initrd /boot/initrd-2.6.16.60-0.27_lustre.1.6.6-smp
###Don't change this comment - YaST2 identifier: Original name: linux###
title openSUSE 10.3
root (hd0,0)
kernel /boot/vmlinuz-2.6.22.5-31-default root=/dev/disk/by-id/scsi-SATA_SAMSUNG_HD103UJS13PJ90QB38092-part1 vga=0x317 splash=silent showopts
initrd /boot/initrd-2.6.22.5-31-default
###Don't change this comment - YaST2 identifier: Original name: floppy###
title Floppy
rootnoverify (hd0,0)
chainloader (fd0)+1
###Don't change this comment - YaST2 identifier: Original name: failsafe###
title Failsafe -- openSUSE 10.3
root (hd0,0)
kernel /boot/vmlinuz-2.6.22.5-31-default root=/dev/disk/by-id/scsi-SATA_SAMSUNG_HD103UJS13PJ90QB38092-part1 vga=normal showopts ide=nodma apm=off
acpi=off noresume edd=off 3
initrd /boot/initrd-2.6.22.5-31-default
lustrefour:~ #
--- On Sun, 1/11/09, Guido Juckeland <guido.juckeland at tu-dresden.de> wrote:
From: Guido Juckeland <guido.juckeland at tu-dresden.de>
Subject: Re: [Lustre-discuss] How to use the openSuse 10.3 kernel.
To: "Arden Wiebe" <albert682 at yahoo.com>
Date: Sunday, January 11, 2009, 2:35 PM
I would try an "mkinitrd".
Guido
Arden Wiebe wrote:
> Okay I went to the sun download site and retrieved the lustre RPM's for my platform:
>
> lustrefour:~/Desktop # uname -a
> Linux lustrefour 2.6.22.5-31-default #1 SMP 2007/09/21 22:29:00 UTC x86_64 x86_64 x86_64 GNU/Linux
> lustrefour:~/Desktop # cat /etc/grub.conf
> setup
--stage2=/boot/grub/stage2 (hd0,0) (hd0,0)
> quit
> lustrefour:~/Desktop # cat /proc/version
> Linux version 2.6.22.5-31-default (geeko at buildhost) (gcc version 4.2.1 (SUSE Linux)) #1 SMP 2007/09/21 22:29:00 UTC
> lustrefour:~/Desktop # rpm -qf /boot/vmlinuz
> kernel-default-2.6.22.5-31
> lustrefour:~/Desktop #
>
>
> I installed all the rpm's but I can't boot the kernel. What didn't I do? I'm new to openSuse.
>
>
>
> _______________________________________________
> Lustre-discuss mailing list
> Lustre-discuss at lists.lustre.org
> http://lists.lustre.org/mailman/listinfo/lustre-discuss
>
--
______________________________________________
Guido Juckeland, M.Sc.
Senior System Engineer (HPC)
Technische Universität Dresden
Center for Information Services and
High Performance Computing (ZIH)
D-01062 Dresden
Germany
Contact:
Trefftz-Bau, HRSK/151
Phone: (+49) 351 463-39871
Fax: (+49) 351 463-37773
e-mail: guido.juckeland at tu-dresden.de
WWW: http://www.tu-dresden.de/zih
-----Inline Attachment Follows-----
_______________________________________________
Lustre-discuss mailing list
Lustre-discuss at lists.lustre.org
http://lists.lustre.org/mailman/listinfo/lustre-discuss
-----Inline Attachment Follows-----
_______________________________________________
Lustre-discuss mailing list
Lustre-discuss at lists.lustre.org
http://lists.lustre.org/mailman/listinfo/lustre-discuss
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.lustre.org/pipermail/lustre-discuss-lustre.org/attachments/20090111/d0bddc2f/attachment.htm>
More information about the lustre-discuss
mailing list