[Lustre-discuss] Lustre-discuss Digest, Vol 41, Issue 39

[Dam Thanh Tung]

I tried to switch back to the default Centos kernel and install
lustre-client and lustre-client-module rpms ( as the manual said, it's
enough for patchless client ) but when i try to mount, an other error
happens:

mount -t lustre 192.168.1.200 at tcp0:/lustre /mnt/lustre/
mount.lustre: mount 192.168.1.200 at tcp0:/lustre at /mnt/lustre failed: No
such device
Are the lustre modules loaded?
Check /etc/modprobe.conf and /proc/filesystems
Note 'alias lustre llite' should be removed from modprobe.conf

Could you help me once again ? :( I think i did exactly all the thing the
Lustre 1.8 Operation Manual said :(




On Mon, Jun 22, 2009 at 8:58 AM, Dam Thanh Tung <tungdt at isds.vn> wrote:

>
>
>>
>>
>> ------------------------------
>>
>> Message: 4
>> Date: Sat, 20 Jun 2009 10:09:23 -0600
>> From: Robert LeBlanc <robert at leblancnet.us>
>> Subject: Re: [Lustre-discuss] VMware error on lustre client
>> To: lustre-discuss at lists.lustre.org
>> Message-ID:
>>        <c5b98f840906200909qb14aacbrdfcec189f30d203d at mail.gmail.com>
>> Content-Type: text/plain; charset="iso-8859-1"
>>
>> On Fri, Jun 19, 2009 at 8:44 PM, Dam Thanh Tung <tungdt at isds.vn> wrote:
>>
>> > Poor me! The weekend started with new error in my lustre system.
>> >
>> > I have just installed lustren on my Centos 5.3 PC,all the package i used
>> is
>> >
>> >
>> > e2fsprogs-1.40.11.sun1-0redhat.rhel5.x86_64.rpm
>> > kernel-lustre-smp-2.6.18-92.1.17.el5_lustre.1.8.0.x86_64.rpm
>> > lustre-1.8.0-2.6.18_92.1.17.el5_lustre.1.8.0smp.x86_64.rpm
>> > lustre-client-1.8.0-2.6.18_92.1.17.el5_lustre.1.8.0smp.x86_64.rpm
>> >
>> lustre-client-modules-1.8.0-2.6.18_92.1.17.el5_lustre.1.8.0smp.x86_64.rpm
>> > lustre-ldiskfs-3.0.8-2.6.18_92.1.17.el5_lustre.1.8.0smp.x86_64.rpm
>> > lustre-modules-1.8.0-2.6.18_92.1.17.el5_lustre.1.8.0smp.x86_64.rpm
>> >
>> > Everything worked well.( I used my PC as a lustre client and copy some
>> > file, it's OK ).  Now when i install VMware workstation 6.5 by rpm
>> package
>> > VMware-Workstation-6.5.1-126130.x86_64.rpm
>> > The install process finished without any error. But when i try to start
>> > VMware, there is an error on my screen, it said that:
>> >
>> > C header files matching your running kernel were not found.
>> > Refer to your distribution's documentation for installation instructions
>> >
>> > So i can't use VMware. Anyone can help me to resolv it,please ?
>> >
>> > You will need to get the source RPMs for the kernel and build VMware's
>> modules against it. Since you are not using the stock CentOS kernel, there
>> is not a provided kernel from VMware. I've had to always build my VMware
>> modules on Debian. I'm not very familiar with CentOS so I can't give you
>> details about how to do it.
>>
>> Thanks for reply, I'll try to figure it out
>>
>>
>>
>> -----------------------------------------------------------------------------
>>
>>
>>
>> The VMWare scriptis probably looking for /usr/src/kernels/`uname -r`
>> or/usr/src/kernels/`uname
>> -r`-`uname-i`
>>
>> Check if you have /usr/src/kernels/2.6.18-92.1.17-x86_64 and create a link
>> at
>> /usr/src/kernels/2.6.18-92.1.17.el5_lustre
>>
>> ln
>> -s /usr/src/kernels/2.6.18-92.1.17.el5_lustre
>> /usr/src/kernels/2.6.18-92.1.17-x86_64
>>
>> if that doesn't do it try
>>
>> ln -s /usr/src/kernels/2.6.18-92.1.17.el5_lustre-x86_64
>> /usr/src/kernels/2.6.18-92.1.17-x86_64
>>
>> Erik
>>
>> On Sat, Jun 20, 2009 at 12:09 PM, Robert LeBlanc <robert at leblancnet.us
>> >wrote:
>>
>> >
>> >
>> > On Fri, Jun 19, 2009 at 8:44 PM, Dam Thanh Tung <tungdt at isds.vn> wrote:
>> >
>> >> Poor me! The weekend started with new error in my lustre system.
>> >>
>> >> I have just installed lustren on my Centos 5.3 PC,all the package i
>> used
>> >> is
>> >>
>> >> e2fsprogs-1.40.11.sun1-0redhat.rhel5.x86_64.rpm
>> >> kernel-lustre-smp-2.6.18-92.1.17.el5_lustre.1.8.0.x86_64.rpm
>> >> lustre-1.8.0-2.6.18_92.1.17.el5_lustre.1.8.0smp.x86_64.rpm
>> >> lustre-client-1.8.0-2.6.18_92.1.17.el5_lustre.1.8.0smp.x86_64.rpm
>> >>
>> lustre-client-modules-1.8.0-2.6.18_92.1.17.el5_lustre.1.8.0smp.x86_64.rpm
>> >> lustre-ldiskfs-3.0.8-2.6.18_92.1.17.el5_lustre.1.8.0smp.x86_64.rpm
>> >> lustre-modules-1.8.0-2.6.18_92.1.17.el5_lustre.1.8.0smp.x86_64.rpm
>> >>
>> >> Everything worked well.( I used my PC as a lustre client and copy some
>> >> file, it's OK ).  Now when i install VMware workstation 6.5 by rpm
>> package
>> >> VMware-Workstation-6.5.1-126130.x86_64.rpm
>> >> The install process finished without any error. But when i try to start
>> >> VMware, there is an error on my screen, it said that:
>> >>
>> >> C header files matching your running kernel were not found.
>> >> Refer to your distribution's documentation for installation
>> instructions
>> >>
>> >> So i can't use VMware. Anyone can help me to resolv it,please ?
>> >>
>> >> You will need to get the source RPMs for the kernel and build VMware's
>> > modules against it. Since you are not using the stock CentOS kernel,
>> there
>> > is not a provided kernel from VMware. I've had to always build my VMware
>> > modules on Debian. I'm not very familiar with CentOS so I can't give you
>> > details about how to do it.
>> >
>> > Robert LeBlanc
>> >
>> >
>> > _______________________________________________
>> > Lustre-discuss mailing list
>> > Lustre-discuss at lists.lustre.org
>> > http://lists.lustre.org/mailman/listinfo/lustre-discuss
>> >
>> >
>>
>
> I followed your guidance, but it didn't work :(
>
>>
>>
>>
>>
>>
>> _______________________________________________
>> Lustre-discuss mailing list
>> Lustre-discuss at lists.lustre.org
>> http://lists.lustre.org/mailman/listinfo/lustre-discuss
>>
>>
>> End of Lustre-discuss Digest, Vol 41, Issue 39
>> **********************************************
>>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.lustre.org/pipermail/lustre-discuss-lustre.org/attachments/20090622/a77282a2/attachment.htm>