[Lustre-discuss] Problems with clean install
Lance Westerhoff
lance at quantumbioinc.com
Sun Jun 6 13:52:59 PDT 2010
Hello All-
I'm new to Lustre and I am attempting to give it a try but for some reason I'm getting an "unknown error 256." I've spent some time googling around, and I haven't had much luck. It would be great to get some insight from anyone who may be seeing something I am missing. It looks like for some reason fsfilt_ldiskfs is having a lot of trouble, but I don't know if that is just because I am trying to do this over TCP, or if there is something else going on.
Below is the output from various tools including dmesg, lsmod, and even a full rpm query.
I guess next step could be trying to patch the kernel myself, but I was really hoping to do this via rpm!
Thank you for any help!
# rpm -qa | grep lustre
lustre-1.8.2-2.6.18_164.11.1.el5_lustre.1.8.2
lustre-modules-1.8.2-2.6.18_164.11.1.el5_lustre.1.8.2
lustre-client-modules-1.8.2-2.6.18_164.11.1.el5_lustre.1.8.2
lustre-client-1.8.2-2.6.18_164.11.1.el5_lustre.1.8.2
lustre-ldiskfs-3.0.9-2.6.18_164.11.1.el5_lustre.1.8.2
kernel-2.6.18-164.11.1.el5_lustre.1.8.2
# cat /etc/redhat-release
CentOS release 5 (Final)
# uname -a
Linux compute-0-0.local 2.6.18-164.11.1.el5_lustre.1.8.2 #1 SMP Sat Jan 23 18:02:32 MST 2010 x86_64 x86_64 x86_64 GNU/Linux
# fdisk -l
Disk /dev/sda: 160.0 GB, 160041885696 bytes
255 heads, 63 sectors/track, 19457 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/sda1 * 1 1275 10241406 83 Linux
/dev/sda2 1276 1785 4096575 83 Linux
/dev/sda3 1786 2040 2048287+ 82 Linux swap / Solaris
/dev/sda4 2041 19457 139902052+ 5 Extended
/dev/sda5 2041 10748 69946978+ 83 Linux
/dev/sda6 10749 10812 514048+ 83 Linux
# mkfs.lustre --version
mkfs.lustre v1.8.2
......
# mkfs.lustre --fsname lustre --mdt --mgs --verbose /dev/sda6
Permanent disk data:
Target: lustre-MDTffff
Index: unassigned
Lustre FS: lustre
Mount type: ldiskfs
Flags: 0x75
(MDT MGS needs_index first_time update )
Persistent mount opts: iopen_nopriv,user_xattr,errors=remount-ro
Parameters: mdt.group_upcall=/usr/sbin/l_getgroups
checking for existing Lustre data: not found
device size = 502MB
2 6 18
formatting backing filesystem ldiskfs on /dev/sda6
target name lustre-MDTffff
4k blocks 128512
options -i 4096 -I 512 -O dir_index,extents,uninit_groups -F
mkfs_cmd = mke2fs -j -b 4096 -L lustre-MDTffff -i 4096 -I 512 -O dir_index,extents,uninit_groups -F /dev/sda6 128512
cmd: mke2fs -j -b 4096 -L lustre-MDTffff -i 4096 -I 512 -O dir_index,extents,uninit_groups -F /dev/sda6 128512
mke2fs 1.41.6.sun1 (30-May-2009)
Filesystem label=lustre-MDTffff
OS type: Linux
Block size=4096 (log=2)
Fragment size=4096 (log=2)
128512 inodes, 128512 blocks
6425 blocks (5.00%) reserved for the super user
First data block=0
Maximum filesystem blocks=134217728
4 block groups
32768 blocks per group, 32768 fragments per group
32128 inodes per group
Superblock backups stored on blocks:
32768, 98304
Writing inode tables: done
Creating journal (4096 blocks): done
Writing superblocks and filesystem accounting information: done
This filesystem will be automatically checked every 39 mounts or
180 days, whichever comes first. Use tune2fs -c or -i to override.
Writing CONFIGS/mountdata
# mount -v -t lustre /dev/sda6 /mdt
arg[0] = /sbin/mount.lustre
arg[1] = -v
arg[2] = -o
arg[3] = rw
arg[4] = /dev/sda6
arg[5] = /mdt
source = /dev/sda6 (/dev/sda6), target = /mdt
options = rw
mounting device /dev/sda6 at /mdt, flags=0 options=device=/dev/sda6
mount.lustre: mount /dev/sda6 at /mdt failed: Unknown error 256 retries left: 0
mount.lustre: mount /dev/sda6 at /mdt failed: Unknown error 256
# modprobe lnet
# lctl network up
LNET configured
# lctl list_nids
192.168.4.254 at tcp
# lctl ping 192.168.4.254 at tcp
12345-0 at lo
12345-192.168.4.254 at tcp
# dmesg
Linux version 2.6.18-164.11.1.el5_lustre.1.8.2 (lbuild at x86-build-0) (gcc version 4.1.2 20080704 (Red Hat 4.1.2-46)) #1 SMP Sat Jan 23 18:02:32 MST 2010
Command line: ro root=LABEL=/
BIOS-provided physical RAM map:
BIOS-e820: 0000000000010000 - 000000000009dc00 (usable)
BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000ca000 - 00000000000cc000 (reserved)
BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000cff50000 (usable)
BIOS-e820: 00000000cff50000 - 00000000cff5e000 (ACPI data)
BIOS-e820: 00000000cff5e000 - 00000000cff5f000 (ACPI NVS)
BIOS-e820: 00000000cff5f000 - 00000000d0000000 (reserved)
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 0000000230000000 (usable)
DMI present.
ACPI: RSDP (v002 PTLTD ) @ 0x00000000000f5a50
ACPI: XSDT (v001 PTLTD XSDT 0x06040000 LTP 0x00000000) @ 0x00000000cff55a96
ACPI: FADT (v003 INTEL SANCLMNT 0x06040000 PTL 0x00000003) @ 0x00000000cff5dd9c
ACPI: MADT (v001 PTLTD APIC 0x06040000 LTP 0x00000000) @ 0x00000000cff5de90
ACPI: MCFG (v001 PTLTD MCFG 0x06040000 LTP 0x00000000) @ 0x00000000cff5df4c
ACPI: BOOT (v001 PTLTD $SBFTBL$ 0x06040000 LTP 0x00000001) @ 0x00000000cff5df88
ACPI: SPCR (v001 PTLTD $UCRTBL$ 0x06040000 PTL 0x00000001) @ 0x00000000cff5dfb0
ACPI: SSDT (v001 PmRef Cpu0Tst 0x00003000 INTL 0x20061109) @ 0x00000000cff5739d
ACPI: SSDT (v001 PmRef Cpu7Tst 0x00003000 INTL 0x20061109) @ 0x00000000cff572f7
ACPI: SSDT (v001 PmRef Cpu6Tst 0x00003000 INTL 0x20061109) @ 0x00000000cff57251
ACPI: SSDT (v001 PmRef Cpu5Tst 0x00003000 INTL 0x20061109) @ 0x00000000cff571ab
ACPI: SSDT (v001 PmRef Cpu4Tst 0x00003000 INTL 0x20061109) @ 0x00000000cff57105
ACPI: SSDT (v001 PmRef Cpu3Tst 0x00003000 INTL 0x20061109) @ 0x00000000cff5705f
ACPI: SSDT (v001 PmRef Cpu2Tst 0x00003000 INTL 0x20061109) @ 0x00000000cff56fb9
ACPI: SSDT (v001 PmRef Cpu1Tst 0x00003000 INTL 0x20061109) @ 0x00000000cff56f13
ACPI: SSDT (v001 PmRef CpuPm 0x00003000 INTL 0x20061109) @ 0x00000000cff55b2a
ACPI: DSDT (v001 Intel SANCLMNT 0x06040000 MSFT 0x03000001) @ 0x0000000000000000
No NUMA configuration found
Faking a node at 0000000000000000-0000000230000000
Bootmem setup node 0 0000000000000000-0000000230000000
Memory for crash kernel (0x0 to 0x0) notwithin permissible range
disabling kdump
On node 0 totalpages: 2064205
DMA zone: 2629 pages, LIFO batch:0
DMA32 zone: 833416 pages, LIFO batch:31
Normal zone: 1228160 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x1008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 7:7 APIC version 20
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x04] enabled)
Processor #4 7:7 APIC version 20
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
Processor #1 7:7 APIC version 20
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x05] enabled)
Processor #5 7:7 APIC version 20
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x02] enabled)
Processor #2 7:7 APIC version 20
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x06] enabled)
Processor #6 7:7 APIC version 20
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled)
Processor #3 7:7 APIC version 20
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled)
Processor #7 7:7 APIC version 20
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Setting APIC routing to physical flat
Using ACPI (MADT) for SMP configuration information
Nosave address range: 000000000009d000 - 000000000009e000
Nosave address range: 000000000009e000 - 00000000000a0000
Nosave address range: 00000000000a0000 - 00000000000ca000
Nosave address range: 00000000000ca000 - 00000000000cc000
Nosave address range: 00000000000cc000 - 00000000000e4000
Nosave address range: 00000000000e4000 - 0000000000100000
Nosave address range: 00000000cff50000 - 00000000cff5e000
Nosave address range: 00000000cff5e000 - 00000000cff5f000
Nosave address range: 00000000cff5f000 - 00000000d0000000
Nosave address range: 00000000d0000000 - 00000000e0000000
Nosave address range: 00000000e0000000 - 00000000f0000000
Nosave address range: 00000000f0000000 - 00000000fec00000
Nosave address range: 00000000fec00000 - 00000000fec10000
Nosave address range: 00000000fec10000 - 00000000fee00000
Nosave address range: 00000000fee00000 - 00000000fee01000
Nosave address range: 00000000fee01000 - 00000000ff000000
Nosave address range: 00000000ff000000 - 0000000100000000
Allocating PCI resources starting at d1000000 (gap: d0000000:10000000)
SMP: Allowing 8 CPUs, 0 hotplug CPUs
Built 1 zonelists. Total pages: 2064205
Kernel command line: ro root=LABEL=/
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 32768 bytes)
Console: colour VGA+ 80x25
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Checking aperture...
ACPI: DMAR not present
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Placing software IO TLB between 0x1c5e000 - 0x5c5e000
Memory: 8175476k/9175040k available (2553k kernel code, 211968k reserved, 1293k data, 208k init)
Calibrating delay loop (skipped), value calculated using timer frequency.. 5666.82 BogoMIPS (lpj=2833413)
Security Framework v1.0.0 initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
selinux_register_security: Registering secondary module capability
Capability LSM initialized as secondary
Mount-cache hash table entries: 256
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 6144K
using mwait in idle threads.
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
CPU0: Thermal monitoring enabled (TM2)
SMP alternatives: switching to UP code
ACPI: Core revision 20060707
Using local APIC timer interrupts.
Detected 20.833 MHz APIC timer.
SMP alternatives: switching to SMP code
Booting processor 1/8 APIC 0x4
Initializing CPU#1
Calibrating delay using timer specific routine.. 5665.99 BogoMIPS (lpj=2832999)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 6144K
CPU: Physical Processor ID: 1
CPU: Processor Core ID: 0
CPU1: Thermal monitoring enabled (TM2)
Intel(R) Xeon(R) CPU E5440 @ 2.83GHz stepping 06
SMP alternatives: switching to SMP code
Booting processor 2/8 APIC 0x1
Initializing CPU#2
Calibrating delay using timer specific routine.. 5665.98 BogoMIPS (lpj=2832994)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 6144K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
CPU2: Thermal monitoring enabled (TM2)
Intel(R) Xeon(R) CPU E5440 @ 2.83GHz stepping 06
SMP alternatives: switching to SMP code
Booting processor 3/8 APIC 0x5
Initializing CPU#3
Calibrating delay using timer specific routine.. 5666.00 BogoMIPS (lpj=2833003)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 6144K
CPU: Physical Processor ID: 1
CPU: Processor Core ID: 1
CPU3: Thermal monitoring enabled (TM2)
Intel(R) Xeon(R) CPU E5440 @ 2.83GHz stepping 06
SMP alternatives: switching to SMP code
Booting processor 4/8 APIC 0x2
Initializing CPU#4
Calibrating delay using timer specific routine.. 5665.89 BogoMIPS (lpj=2832945)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 6144K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 2
CPU4: Thermal monitoring enabled (TM2)
Intel(R) Xeon(R) CPU E5440 @ 2.83GHz stepping 06
SMP alternatives: switching to SMP code
Booting processor 5/8 APIC 0x6
Initializing CPU#5
Calibrating delay using timer specific routine.. 5665.83 BogoMIPS (lpj=2832918)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 6144K
CPU: Physical Processor ID: 1
CPU: Processor Core ID: 2
CPU5: Thermal monitoring enabled (TM2)
Intel(R) Xeon(R) CPU E5440 @ 2.83GHz stepping 06
SMP alternatives: switching to SMP code
Booting processor 6/8 APIC 0x3
Initializing CPU#6
Calibrating delay using timer specific routine.. 5665.80 BogoMIPS (lpj=2832903)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 6144K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 3
CPU6: Thermal monitoring enabled (TM2)
Intel(R) Xeon(R) CPU E5440 @ 2.83GHz stepping 06
SMP alternatives: switching to SMP code
Booting processor 7/8 APIC 0x7
Initializing CPU#7
Calibrating delay using timer specific routine.. 5665.83 BogoMIPS (lpj=2832916)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 6144K
CPU: Physical Processor ID: 1
CPU: Processor Core ID: 3
CPU7: Thermal monitoring enabled (TM2)
Intel(R) Xeon(R) CPU E5440 @ 2.83GHz stepping 06
Brought up 8 CPUs
testing NMI watchdog ... OK.
time.c: Using 3.579545 MHz WALL PM GTOD PIT/TSC timer.
time.c: Detected 2833.413 MHz processor.
sizeof(vma)=176 bytes
sizeof(page)=56 bytes
sizeof(inode)=576 bytes
sizeof(dentry)=216 bytes
sizeof(ext3inode)=776 bytes
sizeof(buffer_head)=96 bytes
sizeof(skbuff)=248 bytes
migration_cost=12,1137
checking if image is initramfs... it is
Freeing initrd memory: 2418k freed
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: Using MMCONFIG at e0000000
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P6._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP5._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP6._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 10 11 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 *11 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 6 7 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 6 7 10 11 14 15) *0, disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 11 devices
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
ACPI: DMAR not present
PCI-GART: No AMD northbridge found.
PCI: Bridge: 0000:00:02.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:00:04.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:00:06.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:00:1c.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:00:1c.4
IO window: 2000-2fff
MEM window: de100000-de1fffff
PREFETCH window: disabled.
PCI: Bridge: 0000:00:1c.5
IO window: 3000-3fff
MEM window: de200000-de2fffff
PREFETCH window: disabled.
PCI: Bridge: 0000:00:1e.0
IO window: 4000-4fff
MEM window: de000000-de0fffff
PREFETCH window 0x00000000dc000000-0x00000000ddffffff
PCI: Setting latency timer of device 0000:00:02.0 to 64
PCI: Setting latency timer of device 0000:00:04.0 to 64
PCI: Setting latency timer of device 0000:00:06.0 to 64
GSI 16 sharing vector 0xA9 and IRQ 16
ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 169
PCI: Setting latency timer of device 0000:00:1c.0 to 64
ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 16 (level, low) -> IRQ 169
PCI: Setting latency timer of device 0000:00:1c.4 to 64
GSI 17 sharing vector 0xB1 and IRQ 17
ACPI: PCI Interrupt 0000:00:1c.5[B] -> GSI 17 (level, low) -> IRQ 177
PCI: Setting latency timer of device 0000:00:1c.5 to 64
PCI: Setting latency timer of device 0000:00:1e.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP reno registered
Simple Boot Flag at 0x41 set to 0x80
audit: initializing netlink socket (disabled)
type=2000 audit(1275855938.061:1): initialized
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
SELinux: Registering netfilter hooks
Initializing Cryptographic API
alg: No test for crc32c (crc32c-generic)
ksign: Installing public key data
Loading keyring
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered (default)
io scheduler cfq registered
Boot video device is 0000:07:01.0
PCI: Setting latency timer of device 0000:00:02.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:02.0:pcie00]
Allocate Port Service[0000:00:02.0:pcie01]
PCI: Setting latency timer of device 0000:00:04.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:04.0:pcie00]
Allocate Port Service[0000:00:04.0:pcie01]
Allocate Port Service[0000:00:04.0:pcie02]
PCI: Setting latency timer of device 0000:00:06.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:06.0:pcie00]
Allocate Port Service[0000:00:06.0:pcie01]
Allocate Port Service[0000:00:06.0:pcie02]
ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 169
PCI: Setting latency timer of device 0000:00:1c.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.0:pcie00]
Allocate Port Service[0000:00:1c.0:pcie02]
Allocate Port Service[0000:00:1c.0:pcie03]
ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 16 (level, low) -> IRQ 169
PCI: Setting latency timer of device 0000:00:1c.4 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.4:pcie00]
Allocate Port Service[0000:00:1c.4:pcie02]
Allocate Port Service[0000:00:1c.4:pcie03]
ACPI: PCI Interrupt 0000:00:1c.5[B] -> GSI 17 (level, low) -> IRQ 177
PCI: Setting latency timer of device 0000:00:1c.5 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.5:pcie00]
Allocate Port Service[0000:00:1c.5:pcie02]
Allocate Port Service[0000:00:1c.5:pcie03]
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
ACPI: Processor [CPU0] (supports 8 throttling states)
ACPI: Processor [CPU1] (supports 8 throttling states)
ACPI: Processor [CPU2] (supports 8 throttling states)
ACPI: Processor [CPU3] (supports 8 throttling states)
ACPI: Processor [CPU4] (supports 8 throttling states)
ACPI: Processor [CPU5] (supports 8 throttling states)
ACPI: Processor [CPU6] (supports 8 throttling states)
ACPI: Processor [CPU7] (supports 8 throttling states)
Real Time Clock Driver v1.12ac
Non-volatile memory driver v1.2
Linux agpgart interface v0.101 (c) Dave Jones
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:0a: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
brd: module loaded
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Probing IDE interface ide0...
Probing IDE interface ide1...
ide-floppy driver 0.99.newide
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
mice: PS/2 mouse device common for all mice
md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: bitmap version 4.39
TCP bic registered
Initializing IPsec netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
ACPI: (supports S0 S1 S4 S5)
Initalizing network drop monitor service
Freeing unused kernel memory: 208k freed
Write protecting the kernel read-only data: 498k
USB Universal Host Controller Interface driver v3.0
ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 169
PCI: Setting latency timer of device 0000:00:1a.0 to 64
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:1a.0: irq 169, io base 0x00001820
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 169
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: irq 169, io base 0x00001840
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 177
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: irq 177, io base 0x00001860
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
GSI 18 sharing vector 0x32 and IRQ 18
ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 50
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.2: irq 50, io base 0x00001880
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
usb 2-2: new low speed USB device using uhci_hcd and address 2
ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 50
PCI: Setting latency timer of device 0000:00:1a.7 to 64
ehci_hcd 0000:00:1a.7: EHCI Host Controller
ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 5
ehci_hcd 0000:00:1a.7: debug port 1
PCI: cache line size of 32 is not supported by device 0000:00:1a.7
ehci_hcd 0000:00:1a.7: irq 50, io mem 0xde500000
ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 16 (level, low) -> IRQ 169
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 6
ehci_hcd 0000:00:1d.7: debug port 1
PCI: cache line size of 32 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: irq 169, io mem 0xde500400
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb6: configuration #1 chosen from 1 choice
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 6 ports detected
usb 2-2: device descriptor read/all, error -71
SCSI subsystem initialized
libata version 3.00 loaded.
ata_piix 0000:00:1f.2: version 2.12
ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 17 (level, low) -> IRQ 177
ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
ata_piix 0000:00:1f.2: SCR access via SIDPR is available but doesn't work
PCI: Setting latency timer of device 0000:00:1f.2 to 64
scsi0 : ata_piix
scsi1 : ata_piix
ata1: SATA max UDMA/133 cmd 0x1c10 ctl 0x1c04 bmdma 0x18d0 irq 177
ata2: SATA max UDMA/133 cmd 0x1c08 ctl 0x1c00 bmdma 0x18d8 irq 177
usb 2-2: new low speed USB device using uhci_hcd and address 4
ata2.00: ATA-7: ST3160815AS, 3.AAC, max UDMA/133
ata2.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata2.00: configured for UDMA/133
Vendor: ATA Model: ST3160815AS Rev: 3.AA
Type: Direct-Access ANSI SCSI revision: 05
SCSI device sda: 312581808 512-byte hdwr sectors (160042 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: drive cache: write back
SCSI device sda: 312581808 512-byte hdwr sectors (160042 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: drive cache: write back
sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
usb 2-2: configuration #1 chosen from 1 choice
sd 1:0:0:0: Attached scsi disk sda
ACPI: PCI Interrupt 0000:00:1f.5[C] -> GSI 18 (level, low) -> IRQ 50
ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
ata_piix 0000:00:1f.5: SCR access via SIDPR is available but doesn't work
PCI: Setting latency timer of device 0000:00:1f.5 to 64
scsi2 : ata_piix
scsi3 : ata_piix
ata3: SATA max UDMA/133 cmd 0x1c28 ctl 0x1c1c bmdma 0x18f0 irq 50
ata4: SATA max UDMA/133 cmd 0x1c20 ctl 0x1c18 bmdma 0x18f8 irq 50
hiddev96: USB HID v1.10 Device [Tripp Lite TRIPP LITE SMART2200RM2U ] on usb-0000:00:1d.0-2
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
SELinux: Disabled at runtime.
SELinux: Unregistering netfilter hooks
type=1404 audit(1275855944.864:2): selinux=0 auid=4294967295 ses=4294967295
input: PC Speaker as /class/input/input0
e1000e: Intel(R) PRO/1000 Network Driver - 1.0.2-k2
e1000e: Copyright (c) 1999-2008 Intel Corporation.
ACPI: PCI Interrupt 0000:05:00.0[A] -> GSI 16 (level, low) -> IRQ 169
PCI: Setting latency timer of device 0000:05:00.0 to 64
eth0: (PCI Express:2.5GB/s:Width x1) 00:30:48:65:ce:0c
eth0: Intel(R) PRO/1000 Network Connection
eth0: MAC: 2, PHY: 2, PBA No: ffffff-0ff
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
ACPI: PCI Interrupt 0000:06:00.0[A] -> GSI 17 (level, low) -> IRQ 177
PCI: Setting latency timer of device 0000:06:00.0 to 64
eth1: (PCI Express:2.5GB/s:Width x1) 00:30:48:65:ce:0d
eth1: Intel(R) PRO/1000 Network Connection
eth1: MAC: 2, PHY: 2, PBA No: ffffff-0ff
ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 17 (level, low) -> IRQ 177
sd 1:0:0:0: Attached scsi generic sg0 type 0
floppy0: no floppy controllers found
lp: driver loaded but no devices found
ACPI: Power Button (FF) [PWRF]
ACPI: Power Button (CM) [PWRB]
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.11.5-ioctl (2007-12-12) initialised: dm-devel at redhat.com
device-mapper: multipath: version 1.0.5 loaded
EXT3 FS on sda1, internal journal
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda5, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda2, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
Adding 2048276k swap on /dev/sda3. Priority:-1 extents:1 across:2048276k
IA-32 Microcode Update Driver: v1.14a <tigran at veritas.com>
e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
w83627hf 9191-0290: Enabling temp2, readings might not make sense
w83627hf 9191-0290: Enabling temp3, readings might not make sense
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
IPv6 over IPv4 tunneling driver
Installing knfsd (copyright (C) 1996 okir at monad.swb.de).
NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
NFSD: starting 90-second grace period
eth0: no IPv6 routers present
FS-Cache: Loaded
Lustre: OBD class driver, http://www.lustre.org/
Lustre: Lustre Version: 1.8.2
Lustre: Build Version: 1.8.2-20100125121550-PRISTINE-2.6.18-164.11.1.el5_lustre.1.8.2
Lustre: Added LNI 192.168.4.254 at tcp [8/256/0/180]
Lustre: Accept secure, port 988
Lustre: Lustre Client File System; http://www.lustre.org/
init dynlocks cache
ldiskfs created from ext3-2.6-rhel5
kjournald starting. Commit interval 5 seconds
LDISKFS FS on sda6, internal journal
LDISKFS-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
LDISKFS FS on sda6, internal journal
LDISKFS-fs: mounted filesystem with ordered data mode.
fsfilt_ldiskfs: Unknown symbol ldiskfs_iget
fsfilt_ldiskfs: disagrees about version of symbol ldiskfs_free_blocks
fsfilt_ldiskfs: Unknown symbol ldiskfs_free_blocks
fsfilt_ldiskfs: Unknown symbol ldiskfs_get_group_desc
fsfilt_ldiskfs: Unknown symbol ext_pblock
fsfilt_ldiskfs: disagrees about version of symbol ldiskfs_journal_start_sb
fsfilt_ldiskfs: Unknown symbol ldiskfs_journal_start_sb
fsfilt_ldiskfs: disagrees about version of symbol __ldiskfs_journal_stop
fsfilt_ldiskfs: Unknown symbol __ldiskfs_journal_stop
fsfilt_ldiskfs: Unknown symbol ldiskfs_ext_store_pblock
fsfilt_ldiskfs: Unknown symbol ldiskfs_itable_unused_count
fsfilt_ldiskfs: disagrees about version of symbol ldiskfs_ext_search_right
fsfilt_ldiskfs: Unknown symbol ldiskfs_ext_search_right
fsfilt_ldiskfs: disagrees about version of symbol ldiskfs_mark_inode_dirty
fsfilt_ldiskfs: Unknown symbol ldiskfs_mark_inode_dirty
fsfilt_ldiskfs: disagrees about version of symbol ldiskfs_ext_calc_credits_for_insert
fsfilt_ldiskfs: Unknown symbol ldiskfs_ext_calc_credits_for_insert
fsfilt_ldiskfs: disagrees about version of symbol ldiskfs_xattr_set_handle
fsfilt_ldiskfs: Unknown symbol ldiskfs_xattr_set_handle
fsfilt_ldiskfs: Unknown symbol ldiskfs_read_inode_bitmap
fsfilt_ldiskfs: disagrees about version of symbol ldiskfs_ext_insert_extent
fsfilt_ldiskfs: Unknown symbol ldiskfs_ext_insert_extent
fsfilt_ldiskfs: Unknown symbol __ldiskfs_journal_get_write_access
fsfilt_ldiskfs: disagrees about version of symbol ldiskfs_mb_new_blocks
fsfilt_ldiskfs: Unknown symbol ldiskfs_mb_new_blocks
fsfilt_ldiskfs: disagrees about version of symbol ldiskfs_ext_search_left
fsfilt_ldiskfs: Unknown symbol ldiskfs_ext_search_left
fsfilt_ldiskfs: disagrees about version of symbol ldiskfs_bread
fsfilt_ldiskfs: Unknown symbol ldiskfs_bread
fsfilt_ldiskfs: disagrees about version of symbol ldiskfs_ext_walk_space
fsfilt_ldiskfs: Unknown symbol ldiskfs_ext_walk_space
fsfilt_ldiskfs: disagrees about version of symbol ldiskfs_mb_discard_inode_preallocations
fsfilt_ldiskfs: Unknown symbol ldiskfs_mb_discard_inode_preallocations
fsfilt_ldiskfs: Unknown symbol __ldiskfs_handle_dirty_metadata
LustreError: 3832:0:(fsfilt.c:124:fsfilt_get_ops()) Can't find fsfilt_ldiskfs interface
LustreError: 3832:0:(obd_config.c:372:class_setup()) setup MGS failed (-256)
LustreError: 3832:0:(obd_mount.c:481:lustre_start_simple()) MGS setup error -256
LustreError: 15e-a: Failed to start MGS 'MGS' (-256). Is the 'mgs' module loaded?
LustreError: 3832:0:(obd_mount.c:1436:server_put_super()) no obd lustre-MDTffff
LustreError: 3832:0:(obd_mount.c:147:server_deregister_mount()) lustre-MDTffff not registered
Lustre: server umount lustre-MDTffff complete
LustreError: 3832:0:(obd_mount.c:2042:lustre_fill_super()) Unable to mount (-256)
# lsmod
Module Size Used by
i2c_dev 43784 0
jbd2 96432 0
mgs 191016 0
mgc 90808 1 mgs
ldiskfs 276800 0
crc16 35072 1 ldiskfs
lustre 526600 0
lov 350344 1 lustre
mdc 171320 1 lustre
lquota 224264 3
osc 207720 1 lustre
ksocklnd 167448 1
ptlrpc 805000 7 mgs,mgc,lustre,lov,mdc,lquota,osc
obdclass 613368 8 mgs,mgc,lustre,lov,mdc,lquota,osc,ptlrpc
lnet 268200 4 lustre,ksocklnd,ptlrpc,obdclass
lvfs 80776 9 mgs,mgc,lustre,lov,mdc,lquota,osc,ptlrpc,obdclass
libcfs 198436 12 mgs,mgc,lustre,lov,mdc,lquota,osc,ksocklnd,ptlrpc,obdclass,lnet,lvfs
nfs 291404 1
fscache 52320 1 nfs
nfsd 287144 17
exportfs 38784 1 nfsd
lockd 101232 3 nfs,nfsd
nfs_acl 36608 2 nfs,nfsd
auth_rpcgss 81696 1 nfsd
ipv6 432224 36
xfrm_nalgo 43268 1 ipv6
crypto_api 42880 1 xfrm_nalgo
autofs4 62856 3
w83627hf 61200 0
w83781d 69288 0
hwmon_vid 35712 2 w83627hf,w83781d
i2c_isa 39040 2 w83627hf,w83781d
sunrpc 198472 19 nfs,nfsd,lockd,nfs_acl,auth_rpcgss
dm_mirror 54544 0
dm_log 44928 1 dm_mirror
dm_multipath 56088 0
scsi_dh 41600 1 dm_multipath
dm_mod 101712 3 dm_mirror,dm_log,dm_multipath
video 53004 0
hwmon 36488 2 w83627hf,w83781d
backlight 39808 1 video
sbs 49856 0
i2c_ec 38528 1 sbs
button 40480 0
battery 43784 0
asus_acpi 50724 0
acpi_memhotplug 40196 0
ac 38664 0
parport_pc 62248 0
lp 47056 0
parport 73100 2 parport_pc,lp
sg 70312 0
i2c_i801 41620 0
shpchp 70828 0
i2c_core 56064 6 i2c_dev,w83627hf,w83781d,i2c_isa,i2c_ec,i2c_i801
e1000e 156888 0
pcspkr 36224 0
ata_piix 56836 4
libata 209424 1 ata_piix
sd_mod 61448 5
scsi_mod 196888 4 scsi_dh,sg,libata,sd_mod
ext3 168208 3
jbd 103792 2 ldiskfs,ext3
ehci_hcd 66060 0
ohci_hcd 55860 0
uhci_hcd 57240 0
And completely FYI:
# rpm -qa
filesystem-2.4.0-1.el5.centos
php-common-5.1.6-15.el5
centos-release-notes-5.1.0-2
zlib-1.2.3-3
popt-1.10.2-47.el5
bzip2-libs-1.0.3-3
elfutils-libelf-0.125-3.el5
info-4.8-14.el5
gawk-3.1.5-14.el5
nss-3.11.7-1.3.el5.centos
libICE-1.0.1-2.1
diffutils-2.8.1-15.2.2
grep-2.5.1-54.2.el5
libstdc++-4.1.2-14.el5
libgpg-error-1.4-2
libacl-2.2.39-2.1.el5
iptables-1.3.5-1.2.1
libsysfs-2.0.0-6
slang-2.0.6-4.el5
ncurses-5.5-24.20060715
libtiff-3.8.2-7.el5
torque-2.3.0-1
time-1.7-27.2.2
dmidecode-2.7-1.28.2.el5
libSM-1.0.1-3.1
libgpg-error-1.4-2
groff-1.18.1.1-11.1
iputils-20020927-43.el5
ORBit2-2.14.3-4.el5
libgomp-4.1.2-14.el5
libevent-1.1a-3.2.1
libart_lgpl-2.3.17-4
libidn-0.6.5-1.1
cyrus-sasl-lib-2.1.22-4
gdbm-1.8.0-26.2.1
ganglia-monitor-core-3.0.7-0
sysfsutils-2.0.0-6
acl-2.2.39-2.1.el5
jwhois-3.2.3-8.el5
nano-1.3.12-1.1
mgetty-1.1.33-9.fc6
foundation-gawk-3.1.5-0
cpuspeed-1.2.1-1.48.el5
iperf-2.0.1-1
eject-2.1.5-4.2.el5
rdist-6.1.5-44
finger-0.17-32.2.1.1
vconfig-1.9-2.1
rdate-1.4-6
libaio-0.3.106-3.2
libtermcap-2.0.8-46.1
tcp_wrappers-7.6-40.4.el5
openib-1.2-6.el5_1.1
libnl-devel-1.0-0.10.pre5.4
libXext-1.0.1-2.1
libXi-1.0.1-3.1
libXaw-1.0.2-8.1
libXxf86vm-1.0.1-3.1
libX11-1.0.3-8.0.1.el5
libXi-1.0.1-3.1
redhat-logos-4.9.99-8.el5.centos
audit-libs-devel-1.5.5-7.el5
rocks-java-5.0-0
rootfiles-8.1-1.1.1
words-3.0-9
aspell-0.60.3-7.1
foundation-perl-tk-804.027-0
mpi-tests-5.0-1
device-mapper-1.02.20-1.el5
numactl-0.9.8-2.el5
nss_db-2.2-35.1
pbstools-1.5-1
krb5-libs-1.6.1-17.el5_1.1
foundation-python-2.4.2-0
kpartx-0.4.7-12.el5_1.3
libxml2-python-2.6.26-2.1.2.1
dmraid-1.0.0.rc13-4.el5
gettext-0.14.6-4.el5
libgssapi-0.10-2
lvm2-2.02.26-3.el5
audit-1.5.5-7.el5
GConf2-2.14.0-9.el5
libnotify-0.4.2-6.el5
python-elementtree-1.2.6-5
libselinux-python-1.33.4-4.el5
wpa_supplicant-0.4.8-10.1.fc6
MAKEDEV-3.23-1.2
mcstrans-0.2.6-1.el5_1.1
dhcdbd-2.2-1.el5
mesa-libGL-6.5.1-7.5.el5
microcode_ctl-1.17-1.42.el5
acpid-1.0.4-5
foundation-python-extras-5.0-0
foundation-cvs-1.11.21-0
foundation-mercurial-0.9.5-0
lftp-3.5.1-2.fc6
pam_ccreds-3-5
mpich2-ethernet-gnu-1.0.6p1-0
cryptsetup-luks-1.0.3-2.2.el5
libutempter-1.1.4-3.fc6
openssl-0.9.8b-8.3.el5_0.2
php-cli-5.1.6-15.el5
libdhcp-1.20-2.el5
mdadm-2.5.4-3.el5
util-linux-2.13-0.45.el5_1.1
portmap-4.0-65.2.2.1
ppp-2.4.4-1.el5
openssh-askpass-4.3p2-24.el5
prelink-0.3.9-2.1
pam_krb5-2.2.14-1
python-devel-2.4.3-19.el5
pciutils-2.2.3-4
apr-util-devel-1.2.7-6
pinfo-0.6.9-1.fc6
httpd-devel-2.2.3-11.el5_1.centos.3
rocks-ssl-5.0-0
ganglia-receptor-5.0-1
ntp-4.2.2p1-7.el5
kernel-devel-2.6.18-53.1.14.el5
pcsc-lite-1.3.1-7
ccid-1.0.1-6.el5
man-1.6d-1.1
system-config-securitylevel-tui-1.6.29.1-1.el5
coolkey-1.1.0-5.el5
setuptool-1.19.2-1.el5.centos
yum-3.0.5-1.el5.centos.5
yum-updatesd-3.0.5-1.el5.centos.5
screen-4.0.3-1.el5
gpg-pubkey-6b8d79e6-3f49313d
gdb-6.8-27.el5
glibc-headers-2.5-34
compat-glibc-2.3.4-2.26
bzip2-libs-1.0.3-4.el5_2
nut-2.2.0-6.el5
alsa-lib-1.0.17-1.el5
libXtst-1.0.1-3.1
cairomm-1.2.4-2.1.el5.rf
fontconfig-2.4.1-7.el5
progsreiserfs-0.3.0.4-1.2.el5.rf
gnome-keyring-0.6.0-1.fc6
libfontenc-1.0.2-2.2.el5
ttmkfdir-3.0.9-23.el5
libdaemon-0.10-5.el5
pyorbit-2.14.1-3.el5
ghostscript-fonts-5.50-13.1.1
docbook-dtds-1.0-30.1
libgnome-2.16.0-6.el5
chkfontpath-1.10.1-1.1
gnome-python2-bonobo-2.16.0-1.fc6
libgnomeprint22-2.12.1-10.el5
gnome-python2-gtksourceview-2.16.0-3.el5
lustre-1.8.2-2.6.18_164.11.1.el5_lustre.1.8.2
lustre-modules-1.8.2-2.6.18_164.11.1.el5_lustre.1.8.2
libgcc-4.1.2-14.el5
setup-2.5.58-1.el5
kernel-headers-2.6.18-53.1.14.el5
cracklib-dicts-2.8.9-3.3
termcap-5.5-1.20060701.1
rmt-0.4b41-2.fc6
mailcap-2.1.23-1.fc6
java3d-1.5.1-0
chkconfig-1.3.30.1-1
glib2-2.12.3-2.fc6
libstdc++-4.1.2-14.el5
audit-libs-1.5.5-7.el5
audit-libs-1.5.5-7.el5
expat-1.95.8-8.2.1
cyrus-sasl-lib-2.1.22-4
libusb-0.1.12-5.1
bash-3.1-16.1
ncurses-5.5-24.20060715
libsepol-1.15.2-1.el5
readline-5.1-1.1
nspr-4.6.5-3.el5
freetype-2.2.1-19.el5
libpng-1.2.10-7.1.el5_0.1
tcp_wrappers-7.6-40.4.el5
procps-3.2.7-8.1.el5
libidn-0.6.5-1.1
pcre-6.6-2.el5_1.7
file-4.17-9.0.1.el5
zlib-1.2.3-3
cpio-2.6-20
binutils-2.17.50.0.6-5.el5
libcap-1.10-26
libattr-2.4.32-1.1
libgcrypt-1.2.3-1
iproute-2.6.18-4.el5
tcl-8.4.13-3.fc6
patch-2.5.4-29.2.2
libXau-1.0.1-3.1
wireless-tools-28-2.el5
libnl-1.0-0.10.pre5.4
nspr-4.6.5-3.el5
tcl-8.4.13-3.fc6
gnutls-1.4.1-2
cups-libs-1.2.4-11.14.el5_1.6
nss-tools-3.11.7-1.3.el5.centos
less-394-5.el5
ed-0.2-38.2.2
gmp-4.1.4-10.el5
libgfortran-4.1.2-14.el5
libdhcp4client-3.0.5-7.el5
hesiod-3.1.0-8
nss-3.11.7-1.3.el5.centos
libxml2-2.6.26-2.1.2.1
libXau-1.0.1-3.1
cpp-4.1.2-14.el5
desktop-file-utils-0.10-7
procmail-3.22-17.1.el5.centos
elfutils-libs-0.125-3.el5
libIDL-0.8.7-1.fc6
dosfstools-2.11-6.2.el5
libvolume_id-095-14.9.el5
checkpolicy-1.33.1-2.el5
ethtool-5-1.el5
mailx-8.1.1-44.2.2
libhugetlbfs-lib-1.0.1-1.el5
bluez-libs-3.7-1
readline-5.1-1.1
keyutils-libs-1.2-1.el5
slang-2.0.6-4.el5
libdrm-2.0.2-1.1
libgfortran-4.1.2-14.el5
libnl-1.0-0.10.pre5.4
libdhcp4client-3.0.5-7.el5
libhugetlbfs-1.0.1-1.el5
mpiexec-0.82-1
expect-5.43.0-5.1
bison-2.3-2.1
rsync-2.6.8-3.1
crash-4.0-4.6.1
libxml2-2.6.26-2.1.2.1
ftp-0.17-33.fc6
talk-0.17-29.2.2
mtr-0.71-3.1
gpm-1.20.1-74.1
foundation-coreutils-5.97-0
nc-1.84-10.fc6
mcelog-0.7-1.22.fc6
iozone-3.291-0
cyrus-sasl-plain-2.1.22-4
foundation-rcs-5.7-0
zip-2.31-1.2.2
libobjc-4.1.2-14.el5
unix2dos-2.2-26.2.2
dos2unix-3.1-27.1
ganglia-pylib-5.0-1
hdparm-6.6-2
pam_passwdqc-1.0.2-1.2.2
setserial-2.17-19.2.2
stream-4.0-1
tree-1.5.0-4
setarch-2.0-1.1
expect-5.43.0-5.1
cyrus-sasl-plain-2.1.22-4
wireless-tools-28-2.el5
libaio-0.3.106-3.2
libobjc-4.1.2-14.el5
pam_smb-1.1.7-7.2.1
libibverbs-1.1.1-6.el5_1.1
libdhcp4client-devel-3.0.5-7.el5
libX11-1.0.3-8.0.1.el5
libXrender-0.9.1-3.1
libXmu-1.0.2-5
libXpm-3.5.5-3
libXcursor-1.1.7-1.1
libXrandr-1.1.1-3.1
libXinerama-1.0.1-2.1
tk-8.4.13-5.el5_1.1
librdmacm-1.0.1-6.el5_1.1
dapl-1.2.1.1-6.el5_1.1
libXxf86vm-1.0.1-3.1
libXt-1.0.2-3.1.fc6
dapl-1.2.1.1-6.el5_1.1
gcc-4.1.2-14.el5
crontabs-1.10-8
centos-release-5-1.0.el5.centos.1
db4-devel-4.3.29-9.fc6
anacron-2.3-45.el5.centos
grub-0.97-13
jboss-4.2.1.GA-0
rocks-boot-auto-5.0-1
audit-libs-devel-1.5.5-7.el5
kernel-doc-2.6.18-53.1.14.el5
rocks-pylib-5.0-0
pbs-rocks-5.0-0
phpsysinfo-2.5.4-1
specspo-13-1.el5.centos
perl-5.8.8-10.el5_0.2
libselinux-1.33.4-4.el5
foundation-perl-5.8.8-0
foundation-mysql-5.0.37-0
perl-String-CRC32-1.4-2.fc6
numactl-0.9.8-2.el5
rocks-openmpi-1.2.6-1
mpich-ethernet-gnu-1.2.7p1-1
fbset-2.1-22
e2fsprogs-libs-1.39-10.el5_1.1
mesa-libGL-6.5.1-7.5.el5
parted-1.8.1-12.el5
aspell-0.60.3-7.1
redhat-rpm-config-8.0.45-22.el5.centos
libselinux-1.33.4-4.el5
device-mapper-1.02.20-1.el5
findutils-4.2.27-4.1
pam-0.99.6.2-3.26.el5
openssl-0.9.8b-8.3.el5_0.2
openldap-2.3.27-8.el5_1.3
module-init-tools-3.3-0.pre3.1.34.el5
cairo-1.2.4-3.el5_1
psmisc-22.2-5
rhpl-0.194.1-1
dbus-1.0.0-6.3.el5_1
apr-1.2.7-11
SysVinit-2.86-14
dbus-python-0.70-7.el5
device-mapper-multipath-0.4.7-12.el5_1.3
libsemanage-1.9.1-3.el5
audit-libs-python-1.5.5-7.el5
libdhcp-1.20-2.el5
at-3.1.8-82.fc6
nscd-2.5-18.el5_1.1
logrotate-3.7.4-8
mtools-3.9.10-2.fc6
libXft-2.1.10-1.1
gtk2-2.10.4-19.el5
libglade2-2.6.0-2
notification-daemon-0.3.5-8.el5
bluez-gnome-0.5-5.fc6
m2crypto-0.16-6.el5.1
yum-metadata-parser-1.0-8.fc6
pygobject2-2.12.1-5.el5
distcache-1.4.5-14.1
cyrus-sasl-devel-2.1.22-4
postgresql-libs-8.1.11-1.el5_1.1
bind-libs-9.3.3-10.el5
udev-095-14.9.el5
httpd-2.2.3-11.el5_1.centos.3
dhclient-3.0.5-7.el5
cyrus-sasl-2.1.22-4
sysklogd-1.4.1-40.el5
gpg-pubkey-e8562897-459f07a4
rpmforge-release-0.3.6-1.el5.rf
compat-glibc-headers-2.3.4-2.26
compat-glibc-2.3.4-2.26
which-2.16-7
vim-minimal-7.0.109-3.el5.3
rng-utils-2.0-1.14.1.fc6
ipsec-tools-0.6.5-8.el5
dhcpv6_client-0.10-33.el5
quota-3.13-1.2.3.2.el5
bind-utils-9.3.3-10.el5
amtu-1.0.4-4
nss_ldap-253-5.el5
tmpwatch-2.9.7-1.1.el5.1
irda-utils-0.9.17-2.fc6
autofs-5.0.1-0.rc2.55.el5.3
python-devel-2.4.3-19.el5
wget-1.10.2-7.el5
foundation-wget-1.10.2-0
pkinit-nss-0.7.3-1.el5
pam_pkcs11-0.5.3-23
ksh-20060214-1.4
readahead-1.3-7.el5
parted-1.8.1-12.el5
tcpdump-3.9.4-11.el5
nss_db-2.2-35.1
krb5-libs-1.6.1-17.el5_1.1
openldap-2.3.27-8.el5_1.3
curl-7.15.5-2.el5
nfs-utils-lib-1.0.8-7.2.z2
libdhcp6client-0.10-33.el5
cracklib-2.8.9-3.3
gnupg-1.4.5-13
sendmail-8.13.8-2.el5
pam-0.99.6.2-3.26.el5
openssh-4.3p2-24.el5
usermode-1.88-3.el5
mkinitrd-5.1.19.6-19
kbd-1.12-19.el5
rp-pppoe-3.5-32.1
nfs-utils-1.0.9-24.el5
openssh-clients-4.3p2-24.el5
krb5-workstation-1.6.1-17.el5_1.1
sudo-1.6.8p12-10
pam_ccreds-3-5
pam_pkcs11-0.5.3-23
curl-7.15.5-2.el5
libutempter-1.1.4-3.fc6
hwdata-0.211-1
libdhcp6client-devel-0.10-33.el5
openldap-devel-2.3.27-8.el5_1.3
htmlview-4.0.0-1.el5
syslinux-3.11-4
pcmciautils-014-5
mkbootdisk-1.5.3-2.1
httpd-devel-2.2.3-11.el5_1.centos.3
libdhcp-devel-1.20-2.el5
sos-1.7-9.2.el5
rocks-config-5.0-1
ganglia-python-5.0-1
foundation-ant-1.6.5-0
logwatch-7.3-5
jdk-1.5.0_10-fcs
rpm-4.4.2-47.el5
foundation-redhat-5.0-0
hal-0.5.8.1-25.el5_1.1
ifd-egate-0.05-15
rpm-python-4.4.2-47.el5
authconfig-5.3.12-2.el5
ntsysv-1.3.30.1-1
oddjob-0.27-7
oddjob-libs-0.27-7
setools-3.0-3.el5
smartmontools-5.36-3.1.el5
rpm-build-4.4.2-47.el5
system-config-network-tui-1.3.99-2.el5
selinux-policy-2.4.6-106.el5_1.3
redhat-lsb-3.1-12.3.EL.el5.centos
firstboot-tui-1.4.27.3-1.el5.centos
redhat-lsb-3.1-12.3.EL.el5.centos
gpg-pubkey-1aa78495-3eb24301
cfengine-2.2.3-1.el5.rf
glibc-common-2.5-34
glibc-2.5-34
glibc-devel-2.5-34
compat-libstdc++-33-3.2.3-61
bzip2-devel-1.0.3-4.el5_2
nut-client-2.2.0-6.el5
unixODBC-2.2.11-7.1
alsa-lib-1.0.17-1.el5
libXp-1.0.0-8.1.el5
libXtst-1.0.1-3.1
pal-12.04.0048-1
glibmm24-2.12.8-1.el5.rf
gtkmm24-2.10.9-1.el5.rf
freetype-2.2.1-21.el5_3
lcms-1.18-0.1.beta1.el5_3.2
qt-3.3.6-23.el5
qtparted-0.4.5-2.el5.rf
libbonobo-2.16.0-1.fc6
libxslt-1.1.17-2.el5_2.2
esound-0.2.36-3
libXfont-1.2.2-1.0.3.el5_1
pycairo-1.2.0-1.1
libFS-1.0.0-3.1
pygtk2-2.10.1-12.el5
avahi-0.6.16-7.el5
libgnomecups-0.2.2-9
gamin-0.1.7-8.el5
sgml-common-0.6.3-18
opensp-1.5.2-4
xml-common-0.6.3-18
scrollkeeper-0.3.14-9.el5
gnome-vfs2-2.16.2-6.el5_5.1
libbonoboui-2.16.0-1.fc6
gnome-python2-2.16.0-1.fc6
gnome-mount-0.5-3.el5
xorg-x11-xfs-1.0.2-4
gnome-python2-desktop-2.16.0-3.el5
ghostscript-8.15.2-9.11.el5
libgnomeprintui22-2.12.1-6
gnome-python2-gnomeprint-2.16.0-3.el5
gedit-2.16.0-9.el5
lustre-client-modules-1.8.2-2.6.18_164.11.1.el5_lustre.1.8.2
lustre-client-1.8.2-2.6.18_164.11.1.el5_lustre.1.8.2
lustre-ldiskfs-3.0.9-2.6.18_164.11.1.el5_lustre.1.8.2
libgcc-4.1.2-14.el5
basesystem-8.0-5.1.1.el5.centos
nash-5.1.19.6-19
tzdata-2007k-2.el5
mktemp-1.5-23.2.2
db4-4.3.29-9.fc6
atk-1.12.2-1.fc6
libtermcap-2.0.8-46.1
sed-4.1.5-5.fc6
foundation-libxml2-2.6.23-0
sqlite-3.3.6-2
libSM-1.0.1-3.1
beecrypt-4.1.2-10.1.1
libjpeg-6b-37
make-3.81-1.1
pkgconfig-0.21-1.fc6
m4-1.4.5-3.el5.1
pcsc-lite-libs-1.3.1-7
gdbm-1.8.0-26.2.1
libsepol-1.15.2-1.el5
libICE-1.0.1-2.1
bc-1.06-21
gzip-1.3.5-9.el5.centos
keyutils-libs-1.2-1.el5
pax-3.4-1.2.2
db4-4.3.29-9.fc6
iptables-ipv6-1.3.5-1.2.1
bzip2-1.0.3-3
elfutils-0.125-3.el5
mingetty-1.07-5.2.2
libXdmcp-1.0.1-2.1
libdrm-2.0.2-1.1
libgcrypt-1.2.3-1
expat-1.95.8-8.2.1
libXdmcp-1.0.1-2.1
libcap-1.10-26
pbs_python-2.9.4-0
iptstate-1.4-1.1.2.2
attr-2.4.32-1.1
foundation-readline-5.1-0
telnet-0.17-39.el5
unzip-5.52-2.2.1
rocks-boot-5.0-1
apache-tomcat-5.x-0
traceroute-2.0.1-2.el5
rsh-0.17-38.el5
rcs-5.7-30.1
compat-libf2c-34-3.4.6-4
pam_smb-1.1.7-7.2.1
symlinks-1.2-24.2.2
gpm-1.20.1-74.1
compat-libf2c-34-3.4.6-4
pam_passwdqc-1.0.2-1.2.2
libibverbs-1.1.1-6.el5_1.1
xorg-x11-filesystem-7.1-2.fc6
libXt-1.0.2-3.1.fc6
libXfixes-4.0.1-2.1
libXres-1.0.1-3.1
startup-notification-0.8-4.1
libXext-1.0.1-2.1
librdmacm-1.0.1-6.el5_1.1
redhat-menus-6.7.8-2.el5
expat-devel-1.95.8-8.2.1
xorg-x11-xauth-1.0.1-2.1
ganglia-hpc-5.0-2
dump-0.4b41-2.fc6
antlr-3.0-0
man-pages-2.39-10.el5
perl-5.8.8-10.el5_0.2
perl-DBI-1.52-1.fc6
lm_sensors-2.10.0-3.1
sharutils-4.6.1-2
cryptsetup-luks-1.0.3-2.2.el5
aspell-en-6.0-2.1
shadow-utils-4.0.17-12.el5
coreutils-5.97-12.1.el5
python-2.4.3-19.el5
fontconfig-2.4.1-7.el5
tar-1.15.1-23.0.1.el5
dbus-glib-0.70-5
net-tools-1.60-73
libuser-0.54.7-2.el5.2
libdhcp6client-0.10-33.el5
tcsh-6.14-12.el5
cracklib-2.8.9-3.3
pango-1.14.9-3.el5.centos
libwnck-2.16.0-4.fc6
paps-0.6.6-17.el5
python-sqlite-1.1.7-1.2.1
net-snmp-libs-5.3.1-19.el5_1.4
apr-util-1.2.7-6
initscripts-8.45.17.EL-1.el5.centos.1
cups-1.2.4-11.14.el5_1.6
vixie-cron-4.1-72.el5
tomcat-connectors-1.2.20-0
bluez-utils-3.7-2.el5.centos
irqbalance-0.55-6.el5
conman-0.1.9.2-8.el5
foundation-graphviz-2.6-0
PyXML-0.8.4-4
stunnel-4.15-2
pam_krb5-2.2.14-1
psacct-6.3.2-41.1
mlocate-0.15-1.el5
lsof-4.78-3
postfix-2.3.3-2
libpcap-0.9.4-11.el5
php-5.1.6-15.el5
mod_ssl-2.2.3-11.el5_1.centos.3
passwd-0.73-1
ypbind-1.19-8.el5
yp-tools-2.9-0.1
openssh-server-4.3p2-24.el5
mkinitrd-5.1.19.6-19
nss_ldap-253-5.el5
apr-devel-1.2.7-11
kernel-2.6.18-53.1.14.el5
python-urlgrabber-3.1.0-2
usbutils-0.71-2.1
libdhcp-devel-1.20-2.el5
tentakel-2.2-0
rocks-411-5.0-0
Deployment_Guide-en-US-5.1.0-11.el5.centos.1
rpm-libs-4.4.2-47.el5
policycoreutils-1.33.12-12.el5
newt-0.52.2-9
kudzu-1.2.57.1.15-1.el5.centos
pm-utils-0.99.3-6.el5.centos.17
NetworkManager-0.6.4-6.el5
net-snmp-5.3.1-19.el5_1.4
coolkey-1.1.0-5.el5
selinux-policy-targeted-2.4.6-106.el5_1.3
openldap-clients-2.3.27-8.el5_1.3
gpg-pubkey-e42d547b-3960bdf1
glibc-2.5-34
glibc-devel-2.5-34
compat-libstdc++-33-3.2.3-61
bzip2-devel-1.0.3-4.el5_2
unixODBC-2.2.11-7.1
libXp-1.0.0-8.1.el5
libsigc++20-2.0.17-1.el5.rf
gparted-0.3.3-2.el5.rf
libmng-1.0.9-5.1
libgnomecanvas-2.14.0-4.1
audiofile-0.2.6-5
xorg-x11-font-utils-7.1-2
python-numeric-23.7-2.2.2
avahi-glib-0.6.16-7.el5
shared-mime-info-0.19-5.el5
openjade-1.3.2-27
gnome-mime-data-2.4.2-3.1
libgnomeui-2.16.0-5.el5
gnome-python2-gnomevfs-2.16.0-1.fc6
urw-fonts-2.3-6.1.1
gtksourceview-1.8.0-1.fc6
e2fsprogs-1.41.6.sun1-0redhat
kernel-2.6.18-164.11.1.el5_lustre.1.8.2
More information about the lustre-discuss
mailing list