[Lustre-discuss] Lustre v2.1 RHEL 6.1 build does not work

[Peter Jones]

Jon

It seems that the instructions (written at the end of May) have grown 
stale since the recent realignment on RHEL6.1. We'll get the 
instructions updated.

Peter

On 11-06-22 6:03 PM, Jon Zhu wrote:
> Hi, all
>
> As a fan of Lustre file system, recently I got a chance to try to 
> build Lustre whamcloud code v2.1 branch from scratch, the following 
> build guide works pretty well:
> http://wiki.whamcloud.com/display/PUB/Walk-thru-+Build+Lustre+2.1+on+RHEL6+from+Whamcloud+git
>
> Everything works well until the last step, when I 
> run  /usr/lib64/lustre/tests/llmount.sh, it failed with the following 
> error:
> #############################################################################################
> [root at ip-10-204-59-145 tests]# /usr/lib64/lustre/tests/llmount.sh
> Stopping clients: ip-10-204-59-145 /mnt/lustre (opts:)
> Stopping clients: ip-10-204-59-145 /mnt/lustre2 (opts:)
> Loading modules from /usr/lib64/lustre/tests/..
> debug=0x33f0404
> subsystem_debug=0xffb7e3ff
> gss/krb5 is not supported
> WARNING: Deprecated config file /etc/modprobe.conf, all config files 
> belong into /etc/modprobe.d/.
> WARNING: Deprecated config file /etc/modprobe.conf, all config files 
> belong into /etc/modprobe.d/.
> WARNING: Deprecated config file /etc/modprobe.conf, all config files 
> belong into /etc/modprobe.d/.
> WARNING: Deprecated config file /etc/modprobe.conf, all config files 
> belong into /etc/modprobe.d/.
> Formatting mgs, mds, osts
> Format mds1: /tmp/lustre-mdt1
> Format ost1: /tmp/lustre-ost1
> Format ost2: /tmp/lustre-ost2
> Checking servers environments
> Checking clients ip-10-204-59-145 environments
> Loading modules from /usr/lib64/lustre/tests/..
> debug=0x33f0404
> subsystem_debug=0xffb7e3ff
> gss/krb5 is not supported
> Setup mgs, mdt, osts
> Starting mds1: -o loop,user_xattr,acl  /tmp/lustre-mdt1 /mnt/mds1
> mount.lustre: mount /dev/loop0 at /mnt/mds1 failed: Operation not 
> supported
> #############################################################################################
>
> Can anyone shed some light on this issue? Does this mean current 
> Whamcloud Lustre code base 
> (git://git.whamcloud.com/fs/lustre-release.git 
> <http://git.whamcloud.com/fs/lustre-release.git>) is not ready for 
> test drive?
>
> Detailed system log messages is attached for your information, the 
> test machine's info is also dumped as following:
>
> [root at ip-10-204-59-145 tests]# uname -a
> Linux ip-10-204-59-145 2.6.32.lustre21 #6 SMP Wed Jun 22 15:27:40 EDT 
> 2011 x86_64 x86_64 x86_64 GNU/Linux
>
> [root at ip-10-204-59-145 tests]# cat /etc/redhat-release
> Red Hat Enterprise Linux Server release 6.1 (Santiago)
>
> BTW, thanks to the Whamcloud team for contributing so much to Lustre, 
> without your effort Lustre is almost dead.
>
> Regards,
> -Jon.
> jon.zhu at gmail.com <mailto:jon.zhu at gmail.com>
>
>
>
>
>
>
> _______________________________________________
> Lustre-discuss mailing list
> Lustre-discuss at lists.lustre.org
> http://lists.lustre.org/mailman/listinfo/lustre-discuss

-- 
Peter Jones
Whamcloud, Inc.
www.whamcloud.com

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.lustre.org/pipermail/lustre-discuss-lustre.org/attachments/20110622/03250e41/attachment.htm>