[Lustre-discuss] SLES 11 SP1 Client rpms built but not working

[Rick Mohr]

Peter,

Sorry for the late response.  I don't know if this will help you or not,
but below are the commands I ran to build the lustre client rpms on one
of our SLES systems:


nautilus:~ # cat /etc/SuSE-release 
SUSE Linux Enterprise Server 11 (x86_64)
VERSION = 11
PATCHLEVEL = 1

nautilus:~ # uname -a
Linux nautilus 2.6.32.29-0.3.1.2687.3.PTF.607050.iommu-default #1 SMP 2011-02-25 13:36:59 +0100 x86_64 x86_64 x86_64 GNU/Linux

nautilus:~ # cd /usr/src/linux-2.6.32.29-0.3.1.2687.3.PTF.607050.iommu

nautilus:/usr/src/linux-2.6.32.29-0.3.1.2687.3.PTF.607050.iommu # make cloneconfig
Cloning configuration file /proc/config.gz
...

nautilus:/usr/src/linux-2.6.32.29-0.3.1.2687.3.PTF.607050.iommu # make prepare
scripts/kconfig/conf -s arch/x86/Kconfig
  CHK     include/linux/version.h
  UPD     include/linux/version.h
....

nautilus:/usr/src/linux-2.6.32.29-0.3.1.2687.3.PTF.607050.iommu # make scripts
  HOSTCC  scripts/genksyms/genksyms.o
  SHIPPED scripts/genksyms/lex.c
....

nautilus:/usr/src/linux-2.6.32.29-0.3.1.2687.3.PTF.607050.iommu # cd /root/lustre-1.8.5

nautilus:~/lustre-1.8.5 # ./configure --disable-server --with-linux=/usr/src/linux-2.6.32.29-0.3.1.2687.3.PTF.607050.iommu \
--with-linux-obj=/usr/src/linux-2.6.32.29-0.3.1.2687.3.PTF.607050.iommu-obj/x86_64/default \
--with-linux-config=/boot/config-2.6.32.29-0.3.1.2687.3.PTF.607050.iommu-default
checking build system type... x86_64-unknown-linux-gnu
checking host system type... x86_64-unknown-linux-gnu
....

nautilus:~/lustre-1.8.5 # make rpms

-- 
Rick Mohr
HPC Systems Administrator
National Institute for Computational Sciences
http://www.nics.tennessee.edu/