[Lustre-discuss] Build lustre 2.6 Client on Debian Wheezy

[Thierry Lamoureux]

Hi guys,

Did one of you had a little moment to have a look to my previous message?

Regards,

Thierry L.

-----Message d'origine-----
De : lustre-discuss-bounces at lists.lustre.org [mailto:lustre-discuss-bounces at lists.lustre.org] De la part de Thierry Lamoureux
Envoyé : mercredi 7 janvier 2015 17:15
À : Dilger, Andreas; Kilian Cavalotti
Cc : lustre-discuss at lists.lustre.org
Objet : Re: [Lustre-discuss] Build lustre 2.6 Client on Debian Wheezy

Hi,

Thanks for your replies. I tried Kilian's advice and it going further, but it is still not work.

You can see the result of make-kpkg here : http://pastebin.com/9E0gDGve

It looks like it doesn't found any module to build even if I've correctly configure MODULE_LOC variable according to this example : http://lists.lustre.org/pipermail/lustre-discuss/2014-May/017734.html

It would be great if someone have another idea.

Thank you,

Thierry.

-----Message d'origine-----
De : Dilger, Andreas [mailto:andreas.dilger at intel.com] Envoyé : mercredi 7 janvier 2015 12:43 À : Kilian Cavalotti; Thierry Lamoureux Cc : lustre-discuss at lists.lustre.org Objet : Re: [Lustre-discuss] Build lustre 2.6 Client on Debian Wheezy

On 2015/01/07, 4:33 AM, "Kilian Cavalotti"
<kilian.cavalotti.work at gmail.com> wrote:

>Bonjour Thierry,
>
>> /bin/sh: 1: [: -lt: unexpected operator
>
>I'm pretty sure that's because in Debian, /bin/sh is linked to dash and 
>the Lustre build script expects bash.
>
>You can try to run:
># dpkg-reconfigure dash
>choose No to link /bin/sh to bash, and re-run the make-kpkg part.
>Hopefully it will work better.
>
>I suggest to re-run "dpkg-reconfigure dash" afterwards to restore dash 
>as the default shell.

Which script is under discussion here?  Definitely we've assumed bash is available, and use bashisms heavily in the testing scripts, since bash is standard on Linux.

If there are are a limited number of places where /bin/sh is assumed to be /bin/bash then it makes sense to fix them so that Debian builds work without users having to change their config.  Is this just a matter of using "#!/bin/bash" explicitly in these scripts, or should they be changed to conform to POSIX sh behaviour?

Cheers, Andreas
--
Andreas Dilger

Lustre Software Architect
Intel High Performance Data Division


_______________________________________________
Lustre-discuss mailing list
Lustre-discuss at lists.lustre.org
http://lists.lustre.org/mailman/listinfo/lustre-discuss