[lustre-discuss] Building Lustre client from Git pull fails when --with-o2ib=no parameter specified to ./configure

[Sean Caron]

I was using a Git pull from Intel circa a few weeks ago ... same code base
I had used to build Server on CentOS 7.

I tried a fresh Git pull just from yesterday and the build failed with an
actual compilation error:

gcc -DHAVE_CONFIG_H -I. -I../..   -include /usr/src/lustre-release/config.h
-I/usr/src/lustre-release/libcfs/include
-I/usr/src/lustre-release/lnet/include
-I/usr/src/lustre-release/lustre/include -D_FORTIFY_SOURCE=2 -fPIC
-D_GNU_SOURCE -D_LARGEFILE64_SOURCE=1 -D_FILE_OFFSET_BITS=64
-DLUSTRE_UTILS=1 -Wall -g -O2 -O2 -Werror -c lustre_lfsck.c
lfs.c: In function ‘migrate_copy_timestamps’:
lfs.c:481:2: error: implicit declaration of function ‘futimes’
[-Werror=implicit-function-declaration]
  return futimes(fdv, tv);
  ^
gcc -DHAVE_CONFIG_H -I. -I../..   -include /usr/src/lustre-release/config.h
-I/usr/src/lustre-release/libcfs/include
-I/usr/src/lustre-release/lnet/include
-I/usr/src/lustre-release/lustre/include -D_FORTIFY_SOURCE=2 -fPIC
-D_GNU_SOURCE -D_LARGEFILE64_SOURCE=1 -D_FILE_OFFSET_BITS=64
-DLUSTRE_UTILS=1 -Wall -g -O2 -O2 -Werror -c obd.c
gcc -DHAVE_CONFIG_H -I. -I../..   -include /usr/src/lustre-release/config.h
-I/usr/src/lustre-release/libcfs/include
-I/usr/src/lustre-release/lnet/include
-I/usr/src/lustre-release/lustre/include -D_FORTIFY_SOURCE=2 -fPIC
-D_GNU_SOURCE -D_LARGEFILE64_SOURCE=1 -D_FILE_OFFSET_BITS=64
-DLUSTRE_UTILS=1 -Wall -g -O2 -O2 -Werror -c lustre_cfg.c
cc1: all warnings being treated as errors
make[6]: *** [lfs.o] Error 1
make[6]: *** Waiting for unfinished jobs....
make[6]: Leaving directory `/usr/src/lustre-release/lustre/utils'
make[5]: *** [all-recursive] Error 1
make[5]: Leaving directory `/usr/src/lustre-release/lustre/utils'
make[4]: *** [all-recursive] Error 1
make[4]: Leaving directory `/usr/src/lustre-release/lustre'
make[3]: *** [all-recursive] Error 1
make[3]: Leaving directory `/usr/src/lustre-release'
make[2]: *** [all] Error 2
make[2]: Leaving directory `/usr/src/lustre-release'
make[1]: *** [build-stamp] Error 2
make[1]: Leaving directory `/usr/src/lustre-release'
dpkg-buildpackage: error: debian/rules build gave error exit status 2
make: *** [debs] Error 2

So looks like some issues there ... I will wait a few days and hopefully
that gets resolved and I can try again.

Best,

Sean


On Wed, Jul 15, 2015 at 6:10 PM, Christopher J. Morrone <morrone2 at llnl.gov>
wrote:

> Hmmm.  There are certainly some puzzling things done in the lustre build
> system around O2IB options and debian packaging.  Sorry, don't think I'll
> be of much help on this one.
>
> chris
>
>
> On 07/15/2015 02:25 PM, Christopher J. Morrone wrote:
>
>> What version of Lustre are you using?  I don't can't reproduce your
>> problem on master.
>>
>> Chris
>>
>> On 07/15/2015 02:10 PM, Christopher J. Morrone wrote:
>>
>>> You could try seeing if "--without-o2ib" gets you what you want.  It
>>> might not, but at least it is quick to try.
>>>
>>> Chris
>>>
>>>
>>> On 07/15/2015 01:41 PM, Sean Caron wrote:
>>>
>>>> Hi all,
>>>>
>>>> Sorry for the cross-post from the Intel Lustre list but hoping I might
>>>> get more traction here...
>>>>
>>>> Working with my Git pull of the Intel Lustre codebase from a few weeks
>>>> ago, I'm trying to build the client on Ubuntu 12.04 with a house-built
>>>> 3.4.61 kernel.
>>>>
>>>> Running through the build procedure roughly outlined in bug report
>>>> LU-1706 but with some changes since the last time I tried:
>>>>
>>>> # tar xvfp lustre-release.tar
>>>> # cd lustre-release
>>>> # sh autogen.sh
>>>> # ./configure --disable-server --with-o2ib=no
>>>>   --with-linux=/usr/src/linux --with-linux-obj=/usr/src/linux
>>>> # make debs
>>>>
>>>> Build fails at the module stage with the following error:
>>>>
>>>> configure: error: bad --with-o2ib path
>>>> make[2]: *** [kdist_config] Error 1
>>>> make[2]: Leaving directory
>>>> `/usr/src/lustre-release/debian/tmp/modules-deb/usr_src/modules/lustre'
>>>> make[1]: *** [kdist_build] Error 2
>>>> make[1]: Leaving directory
>>>> `/usr/src/lustre-release/debian/tmp/modules-deb/usr_src/modules/lustre'
>>>> BUILD FAILED!
>>>> See
>>>>
>>>> /usr/src/lustre-release/debian/tmp/modules-deb/var_cache_modass/lustre.buildlog.3.4.61.1436900735
>>>>
>>>>
>>>> for details.
>>>> make: *** [debs] Error 7
>>>>
>>>> It appears it's not recognizing --with-o2ib=no as outlined in
>>>> ./configure --help or i.e. bug report LU-5953.
>>>>
>>>> If I take that out, build chokes because it can't find Infiniband stuff
>>>> which I suppose is to be expected since this site is not using
>>>> Infiniband.
>>>>
>>>> I've tried moving the parameter around towards the beginning of the
>>>> ./configure parameter list or towards the end and it doesn't seem to
>>>> make a difference.
>>>>
>>>> Noting the place where the install hung; I went in and modified line 338
>>>> in file:
>>>>
>>>> lustre-release/debian/rules
>>>>
>>>> to completely remove $(IB_OPTIONS) from the ./configure statement on
>>>> that line; the build still fails, but in a way that's not really clear
>>>> what the cause is:
>>>>
>>>> export KPKG_DEST_DIR="$(pwd)/.." && \
>>>> version=$(sed -ne '1s/^lustre (\(.*\)).*$/\1/p' debian/changelog) && \
>>>> rm -rf debian/tmp/modules-deb && \
>>>> mkdir debian/tmp/modules-deb && \
>>>> pushd debian/tmp/modules-deb && \
>>>> dpkg -x ../../../../lustre-source_${version}_all.deb $(pwd) && \
>>>> mkdir usr_src/ && \
>>>> tar -C usr_src/ -xjf usr/src/lustre.tar.bz2 && \
>>>> chmod 755 usr_src/modules/lustre/debian/rules && \
>>>> mkdir -p usr_share_modass && \
>>>> ln -s /usr/share/modass/include/ usr_share_modass/ && \
>>>> ln -s /usr/share/modass/packages/ usr_share_modass/ && \
>>>> echo "lustre" > usr_share_modass/compliant.list && \
>>>> export MA_DIR=$(pwd)/usr_share_modass && \
>>>> KVERS=${KVERS:-} && \
>>>> [ "x" != "x" ] && \
>>>> export IB_OPTIONS="--with-o2ib=" && \
>>>> export KSRC_TREE= && \
>>>> KSRC=${KSRC:-} && \
>>>> m-a build ${KSRC:+-k $KSRC} ${KVERS:+-l $KVERS} -i -u $(pwd) lustre && \
>>>> popd && \
>>>> VER=$(sed -ne '1s/^lustre (\(.*-[0-9][0-9]*\)).*$/\1/p'
>>>> debian/changelog) && \
>>>> mkdir -p debs && \
>>>> mv ../linux-patch-lustre_${VER}_all.deb ../lustre-dev_${VER}_*.deb \
>>>>     ../lustre-source_${VER}_all.deb ../lustre-tests_${VER}_*.deb \
>>>>     ../lustre-utils_${VER}_*.deb ../lustre_${VER}.dsc \
>>>>     ../lustre_${VER}_*.changes ../lustre_${VER}.tar.gz \
>>>>     ../lustre-client-modules-${KVERS}_${VER}_*.deb debs/
>>>> /usr/src/lustre-release/debian/tmp/modules-deb /usr/src/lustre-release
>>>> make: *** [debs] Error 1
>>>>
>>>> Is this a legit bug? Am I missing something here? Maybe resolved if I do
>>>> a fresh Git pull? Any suggestions would be a huge help.
>>>>
>>>> Thanks,
>>>>
>>>> Sean
>>>>
>>>>
>>>> _______________________________________________
>>>> lustre-discuss mailing list
>>>> lustre-discuss at lists.lustre.org
>>>> http://lists.lustre.org/listinfo.cgi/lustre-discuss-lustre.org
>>>>
>>>>
>>> .
>>>
>>>
>> .
>>
>>
> _______________________________________________
> lustre-discuss mailing list
> lustre-discuss at lists.lustre.org
> http://lists.lustre.org/listinfo.cgi/lustre-discuss-lustre.org
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.lustre.org/pipermail/lustre-discuss-lustre.org/attachments/20150717/5c43581b/attachment.htm>