[lustre-discuss] trouble mounting after a tunefs
Martin Hecht
hecht at hlrs.de
Fri Jun 12 08:22:56 PDT 2015
Hi John,
on the "Parameters" line the different nodes should not be separated by
":". Each node should be specified by a separate "mgsnode=..." or
"failover.node=..." statement. I'm not sure if separating the two
interfaces of each node by "," is correct here, or if this should be
splitted again in two separate statements.
best regards,
Martin
On 06/12/2015 05:07 PM, John White wrote:
> Good Morning Folks,
> We recently had to add TCP NIDs to an existing o2ib FS. We added the nid to the modprobe.d stuff and tossed the definition of the NID in the failnode and mgsnode params on all OSTs and the MGS + MDT. When either an o2ib or tcp client try to mount, the mount command hangs and dmesg repeats:
> LustreError: 11-0: brc-MDT0000-mdc-ffff881036879c00: Communicating with 10.4.250.10 at o2ib, operation mds_connect failed with -11.
>
> I fear we may have over-done the parameters, could anyone take a look here and let me know if we need to fix things up (remove params, etc)?
>
> MGS:
> Read previous values:
> Target: MGS
> Index: unassigned
> Lustre FS:
> Mount type: ldiskfs
> Flags: 0x4
> (MGS )
> Persistent mount opts: user_xattr,errors=remount-ro
> Parameters:
>
> MDT:
> Read previous values:
> Target: brc-MDT0000
> Index: 0
> Lustre FS: brc
> Mount type: ldiskfs
> Flags: 0x1001
> (MDT no_primnode )
> Persistent mount opts: user_xattr,errors=remount-ro
> Parameters: mgsnode=10.4.250.11 at o2ib,10.0.250.11 at tcp:10.4.250.10 at o2ib,10.0.250.10 at tcp failover.node=10.4.250.10 at o2ib,10.0.250.10 at tcp:10.4.250.11 at o2ib,10.0.250.11 at tcp mdt.quota_type=ug
>
> OST(sample):
> Read previous values:
> Target: brc-OST0002
> Index: 2
> Lustre FS: brc
> Mount type: ldiskfs
> Flags: 0x1002
> (OST no_primnode )
> Persistent mount opts: errors=remount-ro
> Parameters: mgsnode=10.4.250.10 at o2ib,10.0.250.10 at tcp:10.4.250.11 at o2ib,10.0.250.11 at tcp failover.node=10.4.250.12 at o2ib,10.0.250.12 at tcp:10.4.250.13 at o2ib,10.0.250.13 at tcp ost.quota_type=ug
> _______________________________________________
> lustre-discuss mailing list
> lustre-discuss at lists.lustre.org
> http://lists.lustre.org/listinfo.cgi/lustre-discuss-lustre.org
More information about the lustre-discuss
mailing list