[lustre-discuss] New Luster 2.8 Install Question

Mannthey, Keith keith.mannthey at intel.com
Mon May 23 15:46:39 PDT 2016


It seems to me your system has the *-devel packages installed.

You will need to download the new devel packages and install them as well.

https://downloads.hpdd.intel.com/public/e2fsprogs/latest/el7/RPMS/x86_64/

I would recommend you grab new versions of the devel packages mentioned below.

Thanks,
Keith


From: lustre-discuss [mailto:lustre-discuss-bounces at lists.lustre.org] On Behalf Of Michael Skiba
Sent: Monday, May 23, 2016 3:40 PM
To: Cowe, Malcolm J <malcolm.j.cowe at intel.com>; lustre-discuss at lists.lustre.org; michael.skiba at oracle.com
Subject: Re: [lustre-discuss] New Luster 2.8 Install Question

Malcolm, here is my output same problem, remember I am running OUL 7.2 with Red Hat Compatible kernel. Will this work?


[root at isr-x4150-03 lcsw]# ls
e2fsprogs-1.42.13.wc4-7.el7.x86_64.rpm
e2fsprogs-libs-1.42.13.wc4-7.el7.x86_64.rpm
kernel-3.10.0-327.3.1.el7_lustre.x86_64.rpm
libcom_err-1.42.13.wc4-7.el7.x86_64.rpm
libss-1.42.13.wc4-7.el7.x86_64.rpm
lustre-2.8.0-3.10.0_327.3.1.el7_lustre.x86_64.x86_64.rpm
lustre-iokit-2.8.0-3.10.0_327.3.1.el7_lustre.x86_64.x86_64.rpm
lustre-modules-2.8.0-3.10.0_327.3.1.el7_lustre.x86_64.x86_64.rpm
lustre-osd-ldiskfs-2.8.0-3.10.0_327.3.1.el7_lustre.x86_64.x86_64.rpm
lustre-osd-ldiskfs-mount-2.8.0-3.10.0_327.3.1.el7_lustre.x86_64.x86_64.rpm
lustre-tests-2.8.0-3.10.0_327.3.1.el7_lustre.x86_64.x86_64.rpm
[root at isr-x4150-03 lcsw]# ls e2fsprogs-?.* e2fsprogs-libs-?.* lib*
e2fsprogs-1.42.13.wc4-7.el7.x86_64.rpm
e2fsprogs-libs-1.42.13.wc4-7.el7.x86_64.rpm
libcom_err-1.42.13.wc4-7.el7.x86_64.rpm
libss-1.42.13.wc4-7.el7.x86_64.rpm
[root at isr-x4150-03 lcsw]# sudo rpm -Uvh e2fsprogs-?.* e2fsprogs-libs-?.* lib*
error: Failed dependencies:
        e2fsprogs-libs(x86-64) = 1.42.9-7.el7 is needed by (installed) e2fsprogs-devel-1.42.9-7.el7.x86_64
        libcom_err(x86-64) = 1.42.9-7.el7 is needed by (installed) libcom_err-devel-1.42.9-7.el7.x86_64
[root at isr-x4150-03 lcsw]#







[Oracle]<http://www.oracle.com/>
Michael J. Skiba | Principal Support Engineer
Phone: +1 3032729724<tel:+1%203032729724> | Mobile: +1 3036198495<tel:+1%203036198495>
Oracle ISV
500 Elorado Blv. Bldg. 5
Broomfield, Colorado 80021
[Green Oracle]<http://www.oracle.com/commitment>

Oracle is committed to developing practices and products that help protect the environment



From: Cowe, Malcolm J [mailto:malcolm.j.cowe at intel.com]
Sent: Monday, May 23, 2016 3:58 PM
To: Michael Skiba; lustre-discuss at lists.lustre.org<mailto:lustre-discuss at lists.lustre.org>
Subject: Re: [lustre-discuss] New Luster 2.8 Install Question

There are several RPMs that need to be installed together in order to update the e2fsprogs packages to the lustre version, which can be confusing when working with YUM and RPM.  This is what I do to install the e2fsprogs RPMS:

To download:
cd $HOME
wget -r -np https://downloads.hpdd.intel.com/public/e2fsprogs/latest/el7/RPMS/x86_64/
cd $HOME/downloads.hpdd.intel.com/public/e2fsprogs/latest/el7/RPMS/x86_64/

The packages of interest are:
[root at rh7z-c3 x86_64]# ls e2fsprogs-?.* e2fsprogs-libs-?.* lib*
e2fsprogs-1.42.13.wc5-7.el7.x86_64.rpm       libcom_err-devel-1.42.13.wc5-7.el7.x86_64.rpm
e2fsprogs-libs-1.42.13.wc5-7.el7.x86_64.rpm  libss-1.42.13.wc5-7.el7.x86_64.rpm
libcom_err-1.42.13.wc5-7.el7.x86_64.rpm      libss-devel-1.42.13.wc5-7.el7.x86_64.rpm

To install:
sudo rpm -Uvh e2fsprogs-?.* e2fsprogs-libs-?.* lib*

(the -devel packages are optional, but I wanted to keep the command line simple :) )

Malcolm Cowe
High Performance Data Division

Intel Corporation | www.intel.com<http://www.intel.com>

From: lustre-discuss [mailto:lustre-discuss-bounces at lists.lustre.org] On Behalf Of Michael Skiba
Sent: Tuesday, May 24, 2016 7:04 AM
To: Mannthey, Keith; lustre-discuss at lists.lustre.org<mailto:lustre-discuss at lists.lustre.org>; michael.skiba at oracle.com<mailto:michael.skiba at oracle.com>
Subject: Re: [lustre-discuss] New Luster 2.8 Install Question

Keith,  thanks for the reply back, I am trying to set up a very basic configuration for a POC. Taking my information from the latest Lustre manual and a doc. written from Oak Ridge.

The server is what I am working on and going to make it my MGS and MDS.  Than make one of the internal drives my MDT. Then add  the OSS and OST, than add a client. When I install the rpm ( rpm -Uvh e2fsprogs-libs-1.42.13.wc4-7.el7.x86_64.rpm )
(below is the output in red). The dependence is already installed  e2fsprogs-libs-1.42.9-7.el7.x86_64. The only way I get around installing this rpm is to run this yum command "yum install  --setopt=protected_multilib=false" (not a good way). If I do this I can get the necessary packages to install. Once this is done I can configure my Lustre Filesystem; however when I mount my filesystem  I get the output highlighted in yellow. So it looks like all packages did not load properly from running "yum install  --setopt=protected_multilib=false". It also look like bug LU-6062 that should be fixed in 2.8 ( Lustre-Initialization-1: mount.lustre: mount luster-mdt1/mdt1 at /mnt/mds 1 failed: no such device.


[root at isr-x4150-03 lcsw]# rpm -Uvh e2fsprogs-libs-1.42.13.wc4-7.el7.x86_64.rpm
error: Failed dependencies:
        libcom_err(x86-64) = 1.42.13.wc4-7.el7 is needed by e2fsprogs-libs-1.42.13.wc4-7.el7.x86_64
        e2fsprogs-libs(x86-64) = 1.42.9-7.el7 is needed by (installed) e2fsprogs-1.42.9-7.el7.x86_64
        e2fsprogs-libs(x86-64) = 1.42.9-7.el7 is needed by (installed) e2fsprogs-devel-1.42.9-7.el7.x86_64

[root at isr-x4150-03 lcsw]# rpm -qa | grep e2
vte291-0.38.3-2.el7.x86_64
e2fsprogs-libs-1.42.9-7.el7.x86_64
graphite2-1.2.2-5.el7.x86_64
e2fsprogs-1.42.9-7.el7.x86_64
geoclue2-2.1.10-2.el7.x86_64
uname26-1.0-1.el7.x86_64
e2fsprogs-devel-1.42.9-7.el7.x86_64
libglade2-2.6.4-11.el7.x86_64
isorelax-0-0.15.release20050331.el7.noarch
[root at isr-x4150-03 lcsw]#


[root at isr-x4150-01 ~]#  mount -t lustre /dev/sdb /lustre
mount.lustre: mount /dev/sdb at /lustre failed: No such device
Are the lustre modules loaded?
Check /etc/modprobe.conf and /proc/filesystems


Thanks Again......



[Oracle]<http://www.oracle.com/>
Michael J. Skiba | Principal Support Engineer
Phone: +1 3032729724<tel:+1%203032729724> | Mobile: +1 3036198495<tel:+1%203036198495>
Oracle ISV
500 Elorado Blv. Bldg. 5
Broomfield, Colorado 80021
[Green Oracle]<http://www.oracle.com/commitment>

Oracle is committed to developing practices and products that help protect the environment



From: Mannthey, Keith [mailto:keith.mannthey at intel.com]
Sent: Monday, May 23, 2016 12:26 PM
To: Michael Skiba; lustre-discuss at lists.lustre.org<mailto:lustre-discuss at lists.lustre.org>
Subject: Re: [lustre-discuss] New Luster 2.8 Install Question

Are you trying to deploy Lustre servers or clients or both?

I would suspect with a little work OUL 7.2 should work just fine with Lustre 2.8 and the Linux 3.10 based builds.

Thanks,
Keith

From: lustre-discuss [mailto:lustre-discuss-bounces at lists.lustre.org] On Behalf Of Michael Skiba
Sent: Monday, May 23, 2016 11:05 AM
To: Michael Skiba <michael.skiba at oracle.com<mailto:michael.skiba at oracle.com>>; lustre-discuss at lists.lustre.org<mailto:lustre-discuss at lists.lustre.org>
Subject: Re: [lustre-discuss] New Luster 2.8 Install Question

Sorry for the second e-mail please use my work email.

[Oracle]<http://www.oracle.com/>
Michael J. Skiba | Principal Support Engineer
Phone: +1 3032729724<tel:+1%203032729724> | Mobile: +1 3036198495<tel:+1%203036198495>
Oracle ISV
500 Elorado Blv. Bldg. 5
Broomfield, Colorado 80021
[Green Oracle]<http://www.oracle.com/commitment>

Oracle is committed to developing practices and products that help protect the environment



From: Michael Skiba
Sent: Monday, May 23, 2016 11:49 AM
To: lustre-discuss at lists.lustre.org<mailto:lustre-discuss at lists.lustre.org>; michael.skiba at comcast.net<mailto:michael.skiba at comcast.net>
Subject: New Luster 2.8 Install Question

Hi,

I'm installing a new Lustre 2.8 filesystem and having some issue installing the e2fsprogs packages. Before I get into the details I would like to know if I can run Lustre 2.8 on 7.2 Oracle Unbreakable Linux using the Red Hat Compatible kernel. I changed the grub.conf file to boot in the Red Hat Compatible kernel.

Any replies welcomed.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.lustre.org/pipermail/lustre-discuss-lustre.org/attachments/20160523/1a5bc296/attachment-0001.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image001.gif
Type: image/gif
Size: 658 bytes
Desc: image001.gif
URL: <http://lists.lustre.org/pipermail/lustre-discuss-lustre.org/attachments/20160523/1a5bc296/attachment-0002.gif>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image002.gif
Type: image/gif
Size: 356 bytes
Desc: image002.gif
URL: <http://lists.lustre.org/pipermail/lustre-discuss-lustre.org/attachments/20160523/1a5bc296/attachment-0003.gif>


More information about the lustre-discuss mailing list