[lustre-discuss] Lustre compilation error

parag_k parag_k at citilindia.com
Wed Oct 18 19:45:11 PDT 2017


Hi Dilger,
I extracted the src rpm of lustre 2.10.0 using 7zip and got the tarball of lustre 2.10.0.
Also if you put below mentioned link on browser you will find snapshot option and can download lustre.
But once you get tar, the procedure of compilation will be same i guess what i mentioned in last mail. 
Regards,Parag
-------- Original message --------From: "Dilger, Andreas" <andreas.dilger at intel.com> Date: 19/10/2017  7:48 am  (GMT+05:30) To: parag_k <parag_k at citilindia.com> Cc: Chris Horn <hornc at cray.com>, Lustre User Discussion Mailing List <lustre-discuss at lists.lustre.org> Subject: Re: [lustre-discuss] Lustre compilation error 
On Oct 18, 2017, at 07:44, parag_k <parag_k at citilindia.com> wrote:
> 
> I got the source from github.

Lustre isn't hosted on GitHub (unless someone is cloning it there), so it isn't clear what you are compiling.

You should download sources from git://git.hpdd.intel.com/fs/lustre-release.git

Cheers, Andreas

> My configure line is-
> 
> ./configure --disable-client --with-kernel-source-header=/usr/src/kernels/3.10.0-514.el7.x86_64/ --with-o2ib=/usr/src/ofa_kernel/default/
> 
> There are two things I was trying to do.
> 
> 1)      Creating rpms from source. And error mailed below is while making rpms.
> 
>  
> 
> 2)      Compiling from source which is mentioned in the attached guide.
> 
>  
> 
> I also tried by extracting the src rpm and getting tar.gz from there.
> 
>  
> 
> 
> 
> Regards,
> Parag
> 
> -------- Original message --------
> From: Chris Horn <hornc at cray.com>
> Date: 18/10/2017 10:31 am (GMT+05:30)
> To: Parag Khuraswar <parag_k at citilindia.com>, 'Lustre User Discussion Mailing List' <lustre-discuss at lists.lustre.org>
> Subject: Re: [lustre-discuss] Lustre compilation error
> 
> It would be helpful if you provided more context. How did you acquire the source? What was your configure line? Is there a set of build instructions that you are following?
> 
>  
> 
> Chris Horn
> 
>  
> 
> From: lustre-discuss <lustre-discuss-bounces at lists.lustre.org> on behalf of Parag Khuraswar <parag_k at citilindia.com>
> Date: Tuesday, October 17, 2017 at 11:52 PM
> To: 'Lustre User Discussion Mailing List' <lustre-discuss at lists.lustre.org>
> Subject: Re: [lustre-discuss] Lustre compilation error
> 
>  
> 
> Hi,
> 
>  
> 
> Does any one have any idea on below issue?
> 
>  
> 
> Regards,
> 
> Parag
> 
>  
> 
>  
> 
> From: lustre-discuss [mailto:lustre-discuss-bounces at lists.lustre.org] On Behalf Of Parag Khuraswar
> Sent: Tuesday, October , 2017 6:11 PM
> To: 'Lustre User Discussion Mailing List'
> Subject: [lustre-discuss] Lustre compilation error
> 
>  
> 
> Hi,
> 
>  
> 
> I am trying to make rpms from lustre 2.10.0 source. I get below error when I run “make”
> 
>  
> 
> ======================
> 
> make[4]: *** No rule to make target `fld.ko', needed by `all-am'.  Stop.
> 
> make[3]: *** [all-recursive] Error 1
> 
> make[2]: *** [all-recursive] Error 1
> 
> make[1]: *** [all] Error 2
> 
> error: Bad exit status from /tmp/rpmbuild-lustre-root-Ssi5N0Xv/TMP/rpm-tmp.bKMjSO (%build)
> 
>  
> 
>  
> 
> RPM build errors:
> 
>     Bad exit status from /tmp/rpmbuild-lustre-root-Ssi5N0Xv/TMP/rpm-tmp.bKMjSO (%build)
> 
> make: *** [rpms] Error 1
> 
> ======================
> 
>  
> 
> Regards,
> 
> Parag
> 
>  
> 
>  
> 
> _______________________________________________
> lustre-discuss mailing list
> lustre-discuss at lists.lustre.org
> http://lists.lustre.org/listinfo.cgi/lustre-discuss-lustre.org

Cheers, Andreas
--
Andreas Dilger
Lustre Principal Architect
Intel Corporation







-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.lustre.org/pipermail/lustre-discuss-lustre.org/attachments/20171019/156a0d9d/attachment.html>


More information about the lustre-discuss mailing list