[lustre-discuss] lnet shutdown issue while cleint reboot

[Jones, Peter A]

Ok, so that is the correct place and you meant git rather than GitHub. So what tag are you building against? As mentioned previously 2.20 is not a version of Lustre so perhaps this is a typo too?




On 2018-01-03, 6:54 AM, "lustre-discuss on behalf of Parag Khuraswar" <lustre-discuss-bounces at lists.lustre.org on behalf of parag_k at citilindia.com> wrote:

>Hi Jones,
>
>I cloned from here-
>
>git clone git://git.hpdd.intel.com/fs/lustre-release.git
>
>Regards,
>Parag
>
>
>
>-----Original Message-----
>From: Jones, Peter A [mailto:peter.a.jones at intel.com] 
>Sent: Wednesday, January , 2018 7:52 PM
>To: Parag Khuraswar; 'Arman Khalatyan'
>Cc: 'Lustre discussion'
>Subject: Re: [lustre-discuss] lnet shutdown issue while cleint reboot
>
>What location on GitHub? Do you mean the IML repo?
>
>
>
>
>On 2018-01-03, 6:04 AM, "lustre-discuss on behalf of Parag Khuraswar" <lustre-discuss-bounces at lists.lustre.org on behalf of parag_k at citilindia.com> wrote:
>
>>I cloned from github. Lnetctl is there on lustre servers but on clients only lctl is available.
>>
>>Regards,
>>Parag
>>
>>
>>
>>-----Original Message-----
>>From: Arman Khalatyan [mailto:arm2arm at gmail.com]
>>Sent: Wednesday, January , 2018 7:06 PM
>>To: Parag Khuraswar
>>Cc: Lustre discussion
>>Subject: Re: [lustre-discuss] lnet shutdown issue while cleint reboot
>>
>>Strange, Is it some custom lustre ? the 2.20 is not yet there:
>>http://lustre.org/download/
>>lnetctl is inside since 2.10.x
>>
>>
>>On Wed, Jan 3, 2018 at 12:46 PM, Parag Khuraswar <parag_k at citilindia.com> wrote:
>>> Hi,
>>>
>>> In my version of lustre on client nodes 'lnetctl " command is not available.
>>>
>>> Regards,
>>> Parag
>>>
>>>
>>>
>>> -----Original Message-----
>>> From: Arman Khalatyan [mailto:arm2arm at gmail.com]
>>> Sent: Wednesday, January , 2018 4:54 PM
>>> To: Parag Khuraswar
>>> Cc: Lustre discussion
>>> Subject: Re: [lustre-discuss] lnet shutdown issue while cleint reboot
>>>
>>> hi,
>>> Try this before reboot:
>>> umount /lustre
>>> service lnet stop
>>> lnetctl lnet unconfigure
>>> lustre_rmmod
>>> then reboot
>>> On Centos 7.4 it works.
>>>
>>> Cheers,
>>> Arman.
>>>
>>>
>>> On Wed, Jan 3, 2018 at 10:39 AM, Parag Khuraswar <parag_k at citilindia.com> wrote:
>>>> Hi,
>>>>
>>>>
>>>>
>>>> I am using lustre 2.20.1 on RHEL 7.3. On the lustre client nodes 
>>>> when I shutdown I get attached error and nodes don’t get shutdown.
>>>>
>>>> The procedure I follow to shut down the nodes are-
>>>>
>>>> 1)      Unmounts all lustre file systems,
>>>>
>>>> 2)      Stop lnet service ( lnet service stops successfully.),
>>>>
>>>> 3)      Unload lustre module,
>>>>
>>>>
>>>>
>>>> After performing above steps and rebooting node it sucks, error is attached.
>>>>
>>>>
>>>>
>>>> Regards,
>>>>
>>>> Parag
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>> _______________________________________________
>>>> lustre-discuss mailing list
>>>> lustre-discuss at lists.lustre.org
>>>> http://lists.lustre.org/listinfo.cgi/lustre-discuss-lustre.org
>>>>
>>>
>>
>>_______________________________________________
>>lustre-discuss mailing list
>>lustre-discuss at lists.lustre.org
>>http://lists.lustre.org/listinfo.cgi/lustre-discuss-lustre.org
>
>_______________________________________________
>lustre-discuss mailing list
>lustre-discuss at lists.lustre.org
>http://lists.lustre.org/listinfo.cgi/lustre-discuss-lustre.org