[lustre-discuss] Lustre-2.10.5 problem
Riccardo Veraldi
Riccardo.Veraldi at cnaf.infn.it
Mon Sep 24 12:39:14 PDT 2018
as for me Lustre 2.10.5 is not building on ZFS 0.7.10
of course it builds fine with ZFS 0.7.9
CC: gcc
LD: /usr/bin/ld -m elf_x86_64
CPPFLAGS: -include /root/rpmbuild/BUILD/lustre-2.10.5/undef.h
-include /root/rpmbuild/BUILD/lustre-2.10.5/config.h
-I/root/rpmbuild/BUILD/lustre-2.10.5/libcfs/include
-I/root/rpmbuild/BUILD/lustre-2.10.5/lnet/include
-I/root/rpmbuild/BUILD/lustre-2.10.5/lustre/include
-I/root/rpmbuild/BUILD/lustre-2.10.5/lustre/include/uapi
CFLAGS: -g -O2 -Werror -Wall -Werror
EXTRA_KCFLAGS: -include /root/rpmbuild/BUILD/lustre-2.10.5/undef.h
-include /root/rpmbuild/BUILD/lustre-2.10.5/config.h -g
-I/root/rpmbuild/BUILD/lustre-2.10.5/libcfs/include
-I/root/rpmbuild/BUILD/lustre-2.10.5/lnet/include
-I/root/rpmbuild/BUILD/lustre-2.10.5/lustre/include
Type 'make' to build Lustre.
+ make -j2 -s
Making all in .
/root/rpmbuild/BUILD/lustre-2.10.5/lustre/osd-zfs/osd_object.c: In
function '__osd_attr_init':
/root/rpmbuild/BUILD/lustre-2.10.5/lustre/osd-zfs/osd_object.c:1292:2:
error: unknown type name 'timestruc_t'
timestruc_t now;
^
/root/rpmbuild/BUILD/lustre-2.10.5/lustre/osd-zfs/osd_object.c:1302:2:
error: passing argument 1 of 'gethrestime' from incompatible pointer
type [-Werror]
gethrestime(&now);
^
In file included from
/var/lib/dkms/spl/0.7.10/source/include/sys/condvar.h:34:0,
from
/var/lib/dkms/spl/0.7.10/source/include/sys/t_lock.h:31,
from
/var/lib/dkms/zfs/0.7.10/source/include/sys/zfs_context.h:35,
from /var/lib/dkms/zfs/0.7.10/source/include/sys/arc.h:30,
from
/root/rpmbuild/BUILD/lustre-2.10.5/lustre/osd-zfs/osd_internal.h:49,
from
/root/rpmbuild/BUILD/lustre-2.10.5/lustre/osd-zfs/osd_object.c:50:
/var/lib/dkms/spl/0.7.10/source/include/sys/time.h:70:1: note: expected
'struct inode_timespec_t *' but argument is of type 'int *'
gethrestime(inode_timespec_t *ts)
^
In file included from
/root/rpmbuild/BUILD/lustre-2.10.5/lustre/osd-zfs/osd_internal.h:51:0,
from
/root/rpmbuild/BUILD/lustre-2.10.5/lustre/osd-zfs/osd_object.c:50:
/var/lib/dkms/zfs/0.7.10/source/include/sys/zfs_znode.h:278:28: error:
request for member 'tv_sec' in something not a structure or union
(stmp)[0] = (uint64_t)(tp)->tv_sec; \
^
/root/rpmbuild/BUILD/lustre-2.10.5/lustre/osd-zfs/osd_object.c:1303:2:
note: in expansion of macro 'ZFS_TIME_ENCODE'
ZFS_TIME_ENCODE(&now, crtime);
^
/var/lib/dkms/zfs/0.7.10/source/include/sys/zfs_znode.h:279:28: error:
request for member 'tv_nsec' in something not a structure or union
(stmp)[1] = (uint64_t)(tp)->tv_nsec; \
^
/root/rpmbuild/BUILD/lustre-2.10.5/lustre/osd-zfs/osd_object.c:1303:2:
note: in expansion of macro 'ZFS_TIME_ENCODE'
ZFS_TIME_ENCODE(&now, crtime);
^
cc1: all warnings being treated as errors
make[6]: ***
[/root/rpmbuild/BUILD/lustre-2.10.5/lustre/osd-zfs/osd_object.o] Error 1
make[5]: *** [/root/rpmbuild/BUILD/lustre-2.10.5/lustre/osd-zfs] Error 2
make[5]: *** Waiting for unfinished jobs....
make[4]: *** [/root/rpmbuild/BUILD/lustre-2.10.5/lustre] Error 2
make[3]: *** [_module_/root/rpmbuild/BUILD/lustre-2.10.5] Error 2
make[2]: *** [modules] Error 2
make[1]: *** [all-recursive] Error 1
make: *** [all] Error 2
error: Bad exit status from /var/tmp/rpm-tmp.IeEkol (%build)
On 9/24/18 9:14 AM, Tung-Han Hsieh wrote:
> Dear Nathaniel,
>
> Thank you very much for your kindly reply. Indeed I modified the
> lustre-2.10.5 codes:
>
> lustre/osd-zfs/osd_object.c
> lustre/osd-zfs/osd_xattr.c
>
> for the declaration:
>
> inode_timespec_t now;
>
> Similar to what you have done in your patch. So I can compile
> lustre-2.10.5 cleanly with zfs-0.7.11. Sorry I forgot to mention.
>
> But my problem is still there. Actually I just tried:
>
> 1. Applying your patch to the original lustre-2.10.5 code, and
> recompile with spl-0.7.11 and zfs-0.7.11. But loading "lustre"
> module still gives "no such device" error.
>
> 2. I recompile the original lustre-2.10.5 with spl-0.7.9 and
> zfs-0.7.9. They can be compiled cleanly. But again I got the
> "no such device" error when loading "lustre" module.
>
> I am wondering that I must overlooked a trivial step, something
> like one (or some) of the utilities in /opt/lustre/sbin/* should
> be linked to /sbin/ or /usr/sbin/ ....
>
> Any suggestions are very appreciated.
>
> Thank you very much.
>
>
> T.H.Hsieh
>
>
> On Mon, Sep 24, 2018 at 01:21:19PM +0000, Nathaniel Clark wrote:
>> Hello Tung-Han,
>>
>> ZFS 0.7.11 doesn’t compile cleanly with Lustre, yet.
>>
>> There’s a ticket for adding ZFS 0.7.11 support to lustre:
>> https://jira.whamcloud.com/browse/LU-11393
>>
>> It has patches for master (pre-2.12) and a separate patch for 2.10.
>>
>> —
>> Nathaniel Clark <nclark at whamcloud.com<mailto:nclark at whamcloud.com>>
>> Senior Engineer
>> Whamcloud / DDN
>>
>> On Sep 24, 2018, at 2:15 PM, Tung-Han Hsieh <thhsieh at twcp1.phys.ntu.edu.tw<mailto:thhsieh at twcp1.phys.ntu.edu.tw>> wrote:
>>
>> Dear All,
>>
>> I am trying to install Lustre version 2.10.5 with ZFS-0.7.11
>> from source code. After compilation and installation, I tried
>> to load the "lustre" module, but encountered the following
>> error:
>>
>> # modprobe lustre
>> could not load module 'lustre': no such device
>>
>> My procedure of installation is the following:
>>
>> 1. Compile vanilla kernel 3.12.72 downloaded from:
>> https://mirrors.edge.kernel.org/pub/linux/kernel/v3.x/linux-3.12.72.tar.gz
>>
>> 2. Compile spl-0.7.11 downloaded from:
>> https://github.com/zfsonlinux/zfs/releases/download/zfs-0.7.11/spl-0.7.11.tar.gz
>>
>> with the following steps:
>> # ./configure --prefix=/opt/lustre --with-linux=/path/to/linux-3.12.72
>> # make
>> # make install
>>
>> 3. Compile zfs-0.7.11 downloaded from:
>> https://github.com/zfsonlinux/zfs/releases/download/zfs-0.7.11/zfs-0.7.11.tar.gz
>>
>> with the following steps:
>> # ./configure --prefix=/opt/lustre \
>> --with-linux=/path/to/linux-3.12.72 \
>> --with-spl=/path/to/spl-0.7.11
>> # make
>> # make install
>>
>> 4. Compile lustre downloaded from:
>> https://downloads.whamcloud.com/public/lustre/lustre-2.10.5/sles12sp3/client/SRPMS/lustre-2.10.5-1.src.rpm
>>
>> Then I unpack the SRPM by the command:
>> # rpm2cpio lustre-2.10.5-1.src.rpm | cpio --extract --make-directories
>>
>> and compile it by the following:
>> # ./configure --prefix=/opt/lustre \
>> --with-linux=/path/to/linux-3.12.72 \
>> --with-spl=/path/to/spl-0.7.11 \
>> --with-zfs=/path/to/zfs-0.7.11 \
>> --with-o2ib=no \
>> --disable-ldiskfs
>> # make
>> # make install
>>
>> 5. I have made sure the following settings and utilities are correct:
>> - PATH contains /opt/lustre/bin and /opt/lustre/sbin
>> - /sbin/mount.lustre exists.
>> - /sbin/mount.zfs exists.
>> - /usr/sbin/l_getidentity exists.
>> - /usr/sbin/ko2iblnd-probe exists.
>> - /etc/modprobe.d/lustre.conf contains:
>> options lnet networks=tcp
>> - /etc/modprobe.d/ko2iblnd.conf contains:
>> alias ko2iblnd-opa ko2iblnd
>> options ko2iblnd-opa peer_credits=128 peer_credits_hiw=64 credits=1024 concurrent_sends=256 ntx=2048 map_on_demand=32 fmr_pool_size=2048 fmr_flush_trigger=512 fmr_cache=1
>> install ko2iblnd /usr/sbin/ko2iblnd-probe
>>
>> Then I tried to run "modprobe lustre", it says "no such device" error.
>>
>> I tried to replace Lustre-2.10.5 by Lustre-2.9 downloaded from:
>>
>> https://downloads.whamcloud.com/public/lustre/lustre-2.9.0/sles12sp1/client/SRPMS/lustre-2.9.0-1.src.rpm
>>
>> and proceed exactly the same installation steps. Everything works fine.
>>
>> Could anyone suggest me what have I missed for lustre-2.10.5 ? Or suggest
>> me how to debug.
>>
>> Thanks very much.
>>
>>
>> T.H.Hsieh
>> _______________________________________________
>> lustre-discuss mailing list
>> lustre-discuss at lists.lustre.org
>> http://lists.lustre.org/listinfo.cgi/lustre-discuss-lustre.org
>>
> _______________________________________________
> lustre-discuss mailing list
> lustre-discuss at lists.lustre.org
> http://lists.lustre.org/listinfo.cgi/lustre-discuss-lustre.org
More information about the lustre-discuss
mailing list