[lustre-discuss] Cannot mount MDT after upgrading from Lustre 2.12.6 to 2.15.3

[Tung-Han Hsieh]

Dear All,

I should apologize for replying late. Here I would like to clarify why in
my opinion the Lustre ldiskfs code is not self-contained.

In the past, to compile lustre with ldiskfs, we needed to patch Linux
kernel using the patches provided by Lustre source code. And YES, for the
recent Lustre versions, the necessary patches are fewer, and even OK
without applying any patches to Linux kernel.  However, there are another
patches to Lustre ldiskfs code, namely copying Linux kernel ext4fs code
into Lustre source tree, applying patches provided by Lustre, and make it
becomes the ldiskfs code, during the compile time.

Here is the compilation log indicating the patching procedure. To compile
lustre-2.15.3 with Linux-5.4.135, after running

./configure --prefix=/opt/lustre --with-linux=/usr/src/linux-5.4.135
--with-o2ib=no --with-ldiskfsprogs=/opt/e2fs --enable-mpitests=no

and then run "make". The log reads:

====================================================================================================
rm -rf linux-stage linux sources trace
mkdir -p linux-stage/fs/ext4 linux-stage/include/linux \
         linux-stage/include/trace/events
cp /usr/src/linux-5.4.135/fs/ext4/file.c
/usr/src/linux-5.4.135/fs/ext4/ioctl.c /usr/src/linux-5.4.135/fs/ext4/dir.c
.... linux-stage/fs/ext4
if test -n "" ; then \
        cp  linux-stage/include/linux; \
fi
if test -n "/usr/src/linux-5.4.135/include/trace/events/ext4.h" ; then \
        cp /usr/src/linux-5.4.135/include/trace/events/ext4.h
linux-stage/include/trace/events; \
fi
ln -s ../../ldiskfs/kernel_patches/patches linux-stage/patches
ln -s ../../ldiskfs/kernel_patches/series/ldiskfs-5.4.136-ml.series
linux-stage/
series
cd linux-stage && quilt push -a -q
Applying patch patches/rhel8/ext4-inode-version.patch
Applying patch patches/linux-5.4/ext4-lookup-dotdot.patch
Applying patch patches/suse15/ext4-print-inum-in-htree-warning.patch
Applying patch patches/rhel8/ext4-prealloc.patch
Applying patch patches/ubuntu18/ext4-osd-iop-common.patch
Applying patch patches/ubuntu19/ext4-misc.patch
Applying patch patches/rhel8/ext4-mballoc-extra-checks.patch
Applying patch patches/linux-5.4/ext4-hash-indexed-dir-dotdot-update.patch
Applying patch patches/linux-5.4/ext4-kill-dx-root.patch
Applying patch patches/rhel7.6/ext4-mballoc-pa-free-mismatch.patch
Applying patch patches/linux-5.4/ext4-data-in-dirent.patch
Applying patch patches/rhel8/ext4-nocmtime.patch
Applying patch patches/base/ext4-htree-lock.patch
Applying patch patches/linux-5.4/ext4-pdirop.patch
Applying patch patches/rhel8/ext4-max-dir-size.patch
Applying patch
patches/rhel8/ext4-corrupted-inode-block-bitmaps-handling-patches.patch
Applying patch
patches/linux-5.4/ext4-give-warning-with-dir-htree-growing.patch
Applying patch patches/ubuntu18/ext4-jcb-optimization.patch
Applying patch patches/linux-5.4/ext4-attach-jinode-in-writepages.patch
Applying patch patches/rhel8/ext4-dont-check-before-replay.patch
Applying patch
patches/rhel7.6/ext4-use-GFP_NOFS-in-ext4_inode_attach_jinode.patch
Applying patch patches/rhel7.6/ext4-export-orphan-add.patch
Applying patch patches/rhel8/ext4-export-mb-stream-allocator-variables.patch
Applying patch patches/ubuntu19/ext4-iget-with-flags.patch
Applying patch patches/linux-5.4/export-ext4fs-dirhash-helper.patch
Applying patch patches/linux-5.4/ext4-misc.patch
Applying patch patches/linux-5.4/ext4-simple-blockalloc.patch
Applying patch patches/linux-5.4/ext4-xattr-disable-credits-check.patch
Applying patch patches/base/ext4-no-max-dir-size-limit-for-iam-objects.patch
Applying patch patches/rhel8/ext4-ialloc-uid-gid-and-pass-owner-down.patch
Applying patch patches/base/ext4-projid-xattrs.patch
Applying patch patches/linux-5.4/ext4-enc-flag.patch
Applying patch patches/base/ext4-delayed-iput.patch
Now at patch patches/base/ext4-delayed-iput.patch
====================================================================================================

If you check the Lustre source code, before running "make", the directory
"Lustre-2.15.3/ldiskfs/linux-stage" does not exist. After running "make",
it was created by the above patching procedure.

Look into the Lustre codes further, there is a directory providing the
patches to create ldiskfs code:

lustre-2.15.3/ldiskfs/kernel_patches/series

Obviously these patches highly depend on the version of Linux kernel. We
have to balance the requirement to drive our hardware, the long-term
maintained Linux kernel (see https://www.kernel.org/), and the
compatibility with Lustre. For now, we are lucky to find vanilla
Linux-5.4.135 fulfilling the above requirements. In case that Linux-5.4.135
has bugs in driving our fiber storage device, and we have to change to,
say, Linux-5.4.150 or later, then we will get into trouble. This rare
situation did happen before.

So it would be very appreciated if, in the future release, the ldiskfs code
could be a self-contained code similar to ZFS, instead of copying from
Linux kernel and applying patches to convert to ldiskfs code. Doing this,
it is expected that ldiskfs could be less dependent on the minor revisions
of Linux kernel, to bring us more freedom of choosing a suitable Linux
kernel version in our applications.

Best Regards,

T.H.Hsieh

Audet, Martin <Martin.Audet at cnrc-nrc.gc.ca> 於 2023年9月28日 週四 上午2:02寫道：

> Hello Hsieh,
>
>
> Thanks for sharing your experience in response to my request. Thanks also
> for the clarification concerning --writeconf. Since I didn't see that in
> the documentation for major updates, I thought I missed something. Let's
> hope that other will follow and that more information becomes available.
>
>
> From your message I noticed that you mentioned that compiling Lustre with
> ldiskfs as a back end is a nightmare. You argue that Lustre code is not
> self contained and essentially consist of a set of patches over the kernel
> ext4 sources. While I don't contest this I have noticed that hopefully the
> number and the volume of patches tend to decrease with time from RHEL 7 to
> 8 and finally to 9. With RHEL 9.2 I think there is only two patches
> remaining. There is also the patchless option for servers. I don't know if
> you have any experience with that. Older documentation warned about a
> performance penalty when taking advantage of this feature...
>
>
> From what you describe I see that your systems are way larger than ours.
> As I said our cluster is small and our Lustre installation is minimal (24
> compute nodes each with two 12 cores CPUs, Infiniband EDR, 192 GB RAM per
> node, one similarly configure head and file server node, the file server
> node host the Lustre MGS, MDS and OSS servers, it is connected to two
> RAID-6 arrays consisting each of six 8 TB NLSAS HDD for data and one RAID-1
> array of two 480 GB SATA SSD for metadata). We use Lustre to essentially
> have a consistent "relatively large and fast" file system able do to MPI-IO
> correctly. Our system is sufficient for our small team. As I said before,
> we plan in the next weeks to switch from CentOS 7.9 with Lustre 2.12.9 and
> MOFED 4.9 LTS to Lustre 2.15.3, MOFED 5.8 LTS with Alma/RHEL 9.2 on the
> head and compute nodes and Alma/RHEL 8.8 on the file server (Lustre) node.
>
>
> Let's hope we don't hit too many problems during this large update !
>
>
> Thanks,
>
> Martin Audet
>
> P.S. Why do you want to stay with MOFED 4.9 ? MOFED 4.9 include UCX 1.8.0
> which is considered problematic (ex: memory corruption) by OpenMPI
> libraries version > 4.1.0 (they refuse to compile, hopefully we never
> encountered this problem to my knowledge). More recent MOFED also come
> bundled with xpmem which is supposed to accelerate intro-node
> communications (zero copy mechanism) way better than CMA or KNEM (and xpmem
> is supported by both OpenMPI and mpich).
>
> ------------------------------
> *From:* Tung-Han Hsieh <tunghan.hsieh at gmail.com>
> *Sent:* September 26, 2023 9:57 PM
> *To:* Audet, Martin
> *Cc:* lustre-discuss at lists.lustre.org
> *Subject:* Re: [lustre-discuss] Cannot mount MDT after upgrading from
> Lustre 2.12.6 to 2.15.3
>
>
> ****Attention*** This email originated from outside of the NRC.
> ***Attention*** Ce courriel provient de l'extérieur du CNRC.*
> OK. Let me provide more details about the upgrade from 2.12.X to 2.15.X.
>
> We have several production clusters. Due to different requirements and
> hardware, each has slightly different Lustre configurations. Our Linux
> distribution is Debian. Sometimes due to hardware spec, we need to use
> different Linux kernel versions. So we always have to compile Kernel
> (vanilla Linux kernel), MLNX_OFED, e2fsprog / ZFS, and Lustre. Here I
> temporarily skip the compilation (that involved a lot of details), just
> mention the upgrade procedure for two different cases.
>
> 1. Two of our clusters have Lustre-2.12.6, with MDT with ZFS backend, and
> OST with ZFS backend, where ZFS is 0.7.13. From the compatibility list
> mentioned in documentation, the upgrade involves both ZFS upgrade to 2.0.7
> and Lustre upgrade to 2.15.X. It was very smooth and successful. The
> procedure is:
>     1) Compile and install new versions of Linux kernel, MLNX_OFED, ZFS,
> and Lustre. Depending on the hardware, some servers we use Linux kernel
> 4.19.X + MLNX_OFED-4.6, or Linux kernel 4.19.X + MLNX_OFED-4.9, or Linux
> kernel 5.4.X + MLNX_OFED-4.9. They are all compatible to Lustre-2.15.X and
> ZFS-2.0.7.
>      2) After installation of the new software, start up ZFS first:
> ```
> modprobe zfs
> zpool import <lustre_pool_name>
> zpool status <lustre_pool_name>
> ```
>          There will be messages about ZFS pool needs to be upgraded to
> enable new features. But after upgrade, the ZFS pool will not be compatible
> to the old ZFS version anymore. The command to upgrade ZFS pool is (for all
> the MDT and OST pools):
> ```
> zpool upgrade <lustre_pool_name>
> zpool status <lustre_pool_name>
> ```
>           Checking zpool status again, the warning messages were
> disappeared.
>     3) I checked the Lustre Operation Manual again, and saw that in the
> recent version it does not need to run tunefs.lustre --writeconf command.
> Sorry that it was my fault. But in our case, we run this command whenever
> doing Lustre upgrade. Note that to run it, we have to run it in all the
> Lustre MDT and OST pools. It cleared out the logs and will regenerate it
> when mounting Lustre.
>
> 2. One of our clusters have Lustre-2.12.6, with MDT with ldiskfs backend,
> and OST with ZFS backend, where ZFS is 0.7.13. We have to upgrade it to
> e2fsprogs-1.47.0, ZFS-2.0.7 and Lustre-2.15.3. The upgrade of OST part is
> exactly the same as the above, so I don't repeat. The major challenge is
> MDT with ldiskfs. What I have done is
>     1) After installing all the new version of the software, running
> tunefs.lustre --writeconf (for all MDT and OST). Probably this is the wrong
> step for the upgrade to Lustre-2.15.X.
>     2) According to Lustre Operation manual chapter 17, to upgrade Lustre
> from 2.13.0 and before to 2.15.X, we should run
>
> tune2fs -O ea_inode /dev/*mdtdev*
>
> After that, as I have posted, we encounter problem of mounting MDT. Then
> we cure this problem by following the section 18 of Lustre Operation manual.
>
> My personal suggestions are:
> 1. In the future, to do major revision upgrade for our production run
> systems (say,  2.12.X to 2.15.X, or 2.15.X to 2.16 or later), I will
> develop a small testing system, installing exactly the same software of the
> production run, and test the upgrade, to make sure that every steps are
> correct. We did this for upgrading Lustre with ZFS backend. But this time
> due to time pressure, we skip this step for upgrading Lustre with ldiskfs
> backend. I think no matter what situation, it is still worth to do this
> step in order to avoid any risks.
>
> 2. Currently compiling Lustre with ldiskfs backend is still a nightmare.
> The ldiskfs code is not a self-contained, stand along code. It actually
> copied codes from the kernel ext4 code, did a lot of patches, and then did
> the compilation, on the fly. So we have to be very careful to select the
> Linux kernel, to select a compatible one for both our hardware and Lustre
> version. The ZFS backend is much more cleaner. It is a stand along and
> self-contained code. We don't need to do patches on the fly. So I would
> like to suggest the Lustre developer to consider to make the ldiskfs to be
> a stand along and self-contained code in the future release. That will
> bring us a lot of convenient.
>
> Hope that the above experiences could be useful to our community.
>
> ps. Lustre Operation Manual:
> https://doc.lustre.org/lustre_manual.xhtml#Upgrading_2.x
>
> Best Regards,
>
> T.H.Hsieh
>
> Audet, Martin <Martin.Audet at cnrc-nrc.gc.ca> 於 2023年9月27日 週三 上午3:44寫道：
>
>> Hello all,
>>
>>
>> I would appreciate if the community would give more attention to this
>> issue because upgrading from 2.12.x to 2.15.x, two LTS versions, is
>> something that we can expect many cluster admin will try to do in the next
>> few months...
>>
>>
>> We ourselves plan to upgrade a small Lustre (production) system from
>> 2.12.9 to 2.15.3 in the next couple of weeks...
>>
>>
>> After seeing problems reports like this we start feeling a bit nervous...
>>
>>
>> The documentation for doing this major update appears to me as not very
>> specific...
>>
>>
>> In this document for example,
>> https://doc.lustre.org/lustre_manual.xhtml#upgradinglustre , the update
>> process appears not so difficult and there is no mention of using "tunefs.lustre
>> --writeconf" for this kind of update.
>>
>>
>> Or am I missing something ?
>>
>>
>> Thanks in advance for providing more tips for this kind of update.
>>
>>
>> Martin Audet
>> ------------------------------
>> *From:* lustre-discuss <lustre-discuss-bounces at lists.lustre.org> on
>> behalf of Tung-Han Hsieh via lustre-discuss <
>> lustre-discuss at lists.lustre.org>
>> *Sent:* September 23, 2023 2:20 PM
>> *To:* lustre-discuss at lists.lustre.org
>> *Subject:* [lustre-discuss] Cannot mount MDT after upgrading from Lustre
>> 2.12.6 to 2.15.3
>>
>>
>> ****Attention*** This email originated from outside of the NRC.
>> ***Attention*** Ce courriel provient de l'extérieur du CNRC.*
>> Dear All,
>>
>> Today we tried to upgrade Lustre file system from version 2.12.6 to
>> 2.15.3. But after the work, we cannot mount MDT successfully. Our MDT is
>> ldiskfs backend. The procedure of upgrade is
>>
>> 1. Install the new version of e2fsprogs-1.47.0
>> 2. Install Lustre-2.15.3
>> 3. After reboot, run: tunefs.lustre --writeconf /dev/md0
>>
>> Then when mounting MDT, we got the error message in dmesg:
>>
>> ===========================================================
>> [11662.434724] LDISKFS-fs (md0): mounted filesystem with ordered data
>> mode. Opts: user_xattr,errors=remount-ro,no_mbcache,nodelalloc
>> [11662.584593] Lustre: 3440:0:(scrub.c:189:scrub_file_load())
>> chome-MDT0000: reset scrub OI count for format change (LU-16655)
>> [11666.036253] Lustre: MGS: Logs for fs chome were removed by user
>> request.  All servers must be restarted in order to regenerate the logs: rc
>> = 0
>> [11666.523144] Lustre: chome-MDT0000: Imperative Recovery not enabled,
>> recovery window 300-900
>> [11666.594098] LustreError: 3440:0:(mdd_device.c:1355:mdd_prepare())
>> chome-MDD0000: get default LMV of root failed: rc = -2
>> [11666.594291] LustreError:
>> 3440:0:(obd_mount_server.c:2027:server_fill_super()) Unable to start
>> targets: -2
>> [11666.594951] Lustre: Failing over chome-MDT0000
>> [11672.868438] Lustre: 3440:0:(client.c:2295:ptlrpc_expire_one_request())
>> @@@ Request sent has timed out for slow reply: [sent 1695492248/real
>> 1695492248]  req at 000000005dfd9b53 x1777852464760768/t0(0)
>> o251->MGC192.168.32.240 at o2ib@0 at lo:26/25 lens 224/224 e 0 to 1 dl
>> 1695492254 ref 2 fl Rpc:XNQr/0/ffffffff rc 0/-1 job:''
>> [11672.925905] Lustre: server umount chome-MDT0000 complete
>> [11672.926036] LustreError: 3440:0:(super25.c:183:lustre_fill_super())
>> llite: Unable to mount <unknown>: rc = -2
>> [11872.893970] LDISKFS-fs (md0): mounted filesystem with ordered data
>> mode. Opts: (null)
>> ============================================================
>>
>> Could anyone help to solve this problem ? Sorry that it is really urgent.
>>
>> Thank you very much.
>>
>> T.H.Hsieh
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.lustre.org/pipermail/lustre-discuss-lustre.org/attachments/20231001/9beea5ce/attachment-0001.htm>