[lustre-discuss] FIEMAP and DoM
John Bauer
bauerj at iodoctors.com
Fri May 24 06:12:50 PDT 2024
Is FIEMAP supported on a DoM file? I have a simple file that is a 2
component PFL. The first component is DoM. My utility program that
does the FIEMAP, and which works with non-DoM PFL files, does not work
when the first component is DoM.
ioctl(FS_IOC_FIEMAP) fe_device=0 fe_logical=0 file_size=1048576000 error
Unknown error 524
Is this as expected?
John
pfe27.jbauer2 286> lfs getstripe /nobackup/jbauer2/dd.dir/dd_test.dat
/nobackup/jbauer2/dd.dir/dd_test.dat
lcm_layout_gen: 3
lcm_mirror_count: 1
lcm_entry_count: 2
lcme_id: 1
lcme_mirror_id: 0
lcme_flags: init
lcme_extent.e_start: 0
lcme_extent.e_end: 1048576
lmm_stripe_count: 0
lmm_stripe_size: 1048576
lmm_pattern: mdt
lmm_layout_gen: 0
lmm_stripe_offset: 0
lmm_pool: ssd-pool
lcme_id: 2
lcme_mirror_id: 0
lcme_flags: init
lcme_extent.e_start: 1048576
lcme_extent.e_end: EOF
lmm_stripe_count: 6
lmm_stripe_size: 5242880
lmm_pattern: raid0
lmm_layout_gen: 0
lmm_stripe_offset: 121
lmm_pool: ssd-pool
lmm_objects:
- 0: { l_ost_idx: 121, l_fid: [0x100790000:0x3273e83:0x0] }
- 1: { l_ost_idx: 131, l_fid: [0x100830000:0x325c4b2:0x0] }
- 2: { l_ost_idx: 116, l_fid: [0x100740000:0x31e236f:0x0] }
- 3: { l_ost_idx: 117, l_fid: [0x100750000:0x317dbf2:0x0] }
- 4: { l_ost_idx: 124, l_fid: [0x1007c0000:0x320ec8d:0x0] }
- 5: { l_ost_idx: 125, l_fid: [0x1007d0000:0x32094a8:0x0] }
pfe27.jbauer2 287> llfie /nobackup/jbauer2/dd.dir/dd_test.dat
StripeChunks_get() ioctl(FS_IOC_FIEMAP) fe_device=0 fe_logical=0
file_size=1048576000 error Unknown error 524
StripeChunks_get() fm_mapped_extents=0
pfe27.jbauer2 288>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.lustre.org/pipermail/lustre-discuss-lustre.org/attachments/20240524/4c8b9ae5/attachment.htm>
More information about the lustre-discuss
mailing list