<div dir="ltr">Hi Andreas,<br><br>Thanks for the information you gave. But it did not help.<br><br>I followed the below steps for installation:<br>1) I did not install any kernel. The kernel is from rhel 5.1<br>2) I installed lustre-client-modules and lustre-client rpms.<br>
<br>But the error messages are the same when i tried to mount the filesystem:<br><br>mount.lustre: mount <a href="http://klhi1.uybhm.itu.edu.tr/" target="_blank">klhi1.uybhm.itu.edu.tr</a>@o2ib0:/<div dir="ltr">klfs at /klfs failed: No such device<br>
Are the lustre modules loaded?<br>Check /etc/modprobe.conf and /proc/filesystems<br>
Note 'alias lustre llite' should be removed from modprobe.conf<br><br>And also when modprobing the lnet module the error message is same again:<br>FATAL: Module lnet not found.<br></div><br>Thanks anyway. I might have missed something. But i don't know what the thing is. I decided to install patched kernel and lustre packages. After installation client could mounted the file system.<br>
<br><br>Thanks and Regards,<br><br>Ender GULER<br><br><div class="gmail_quote">On Thu, Aug 28, 2008 at 5:51 PM, Andreas Dilger <span dir="ltr"><<a href="mailto:adilger@sun.com">adilger@sun.com</a>></span> wrote:<br>
<blockquote class="gmail_quote" style="border-left: 1px solid rgb(204, 204, 204); margin: 0pt 0pt 0pt 0.8ex; padding-left: 1ex;"><div class="Ih2E3d">On Aug 27, 2008  20:57 +0300, Ender G�ler wrote:<br>
> I'm new to lustre community and lustre software as well. I have question<br>
> regarding to patchless lustre client installation. The OS is Redhat EL 5.1.<br>
> I'm using voltaire gridstack v5.1.3 for infiniband software stack. I<br>
> installed the lustre-1.6.5.1 servers without any problem. The client and<br>
> server OSes are same. The problem is installing patchless client. Are there<br>
> any howto or guide for that. I googled but got nothing about it. Just the<br>
> link <a href="http://wiki.lustre.org/index.php?title=Patchless_Client" target="_blank">http://wiki.lustre.org/index.php?title=Patchless_Client</a> . When i tried<br>
> the things which i read on that page, no modules were build. Are there<br>
> anything that must be done for the patchless client installation.<br>
><br>
> I ran the following command for configuration:<br>
><br>
> ./configure --prefix=/usr/local/lustre --enable-uoss --enable-bgl<br>
> --enable-posix-osd --enable-panic_dumplog --enable-quota<br>
> --enable-health-write --enable-lru-resize --enable-adaptive-timeouts<br>
> --enable-efence --enable-libwrap --enable-snmp --with-o2ib=/usr/src/openib<br>
> --with-linux=/usr/src/kernels/2.6.18-53.1.14.el5<br>
><br>
> Then ran make && make install. None of the above steps returned error<br>
> messages. So I assumed that the compilation and installation is successful.<br>
> But when i try to mount the server the following error message returned:<br>
<br>
</div>There are actually patchless client RPMs available for download at the<br>
same place as the server RPMs.  They are called "lustre-client" or similar.<br>
<br>
Note that it is also possible to run the same "server" kernel and Lustre<br>
RPMs on the client nodes, since the lustre RPM also contains the client.<br>
<br>
Cheers, Andreas<br>
<font color="#888888">--<br>
Andreas Dilger<br>
Sr. Staff Engineer, Lustre Group<br>
Sun Microsystems of Canada, Inc.<br>
<br>
</font></blockquote></div><br></div>