Hi,<br><br>Please see bellow outputs <br><br>e1000: eth0: e1000_watchdog: NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX<br><br>and there is no packet loss on the network.<br><br>Kernel Interface table<br>Iface   MTU Met   RX-OK RX-ERR RX-DRP RX-OVR   TX-OK TX-ERR TX-DRP TX-OVR Flg<br>
eth0   1500   0 9148114      0      0      016991786      0      0      0 BMRU<br>lo    16436   0   69389      0      0      0   69389      0      0      0 LRU<br><br>regards,<br>Udara.<br><br><div class="gmail_quote">On Fri, Oct 30, 2009 at 5:41 PM, Mag Gam <span dir="ltr"><<a href="mailto:magawake@gmail.com">magawake@gmail.com</a>></span> wrote:<br>
<blockquote class="gmail_quote" style="border-left: 1px solid rgb(204, 204, 204); margin: 0pt 0pt 0pt 0.8ex; padding-left: 1ex;">Check the network connections.<br>
<br>
<br>
What kind of network are you on? 10/100 or 100/1000? Do you see any<br>
dropped packets?<br>
<div><div></div><div class="h5"><br>
<br>
<br>
On Fri, Oct 30, 2009 at 7:49 AM, udara weerapperuma <<a href="mailto:udaraslt@gmail.com">udaraslt@gmail.com</a>> wrote:<br>
><br>
> Hi All,<br>
><br>
><br>
> I have SLES 11 x86-64  and lustre v 1.8.1.1 installed in it. This use as MDS<br>
> and OSS.<br>
><br>
> /dev/sda3 ----2 GB------ MDT<br>
> /dev/sdb2 ----5 GB------ OST1<br>
> /dev/sdb3 ----5 GB------ OST2<br>
> /dev/sdb5 ----5 GB------ OST3<br>
> /dev/sdb6 ----5 GB------ OST4<br>
><br>
> Then I have 2 clients running on SLES 11 x86-64 and SLES 10 SP2 x86-64 both<br>
> has the lustre v 1.8.1.1 installed.<br>
> The SLES 10 client gives the same speed for every bs value in dd command (dd<br>
> if=/dev/zero of=/lustre/sles10.out bs=1k gives 43 MB/s)<br>
> This is same for the every bs value on SLES 10 SP2.<br>
><br>
> But for the SLES 11 x86-64 client gives only 4 MB/s speed for the small bs<br>
> values. (bs=1k )<br>
> It gives 45 MB/s for the bs=32k values and up.<br>
><br>
> I have attached some outputs from the llstat command on both the clients.<br>
><br>
> Please give me a solution to tune SLES 11 x86-64 server to get 40 MB/s speed<br>
> under bs=1k situvation.<br>
> tnx,<br>
> Udara<br>
><br>
><br>
</div></div>> _______________________________________________<br>
> Lustre-discuss mailing list<br>
> <a href="mailto:Lustre-discuss@lists.lustre.org">Lustre-discuss@lists.lustre.org</a><br>
> <a href="http://lists.lustre.org/mailman/listinfo/lustre-discuss" target="_blank">http://lists.lustre.org/mailman/listinfo/lustre-discuss</a><br>
><br>
><br>
</blockquote></div><br>