<br>Hi All,<br><div class="gmail_quote"><br><br>I have SLES 11 x86-64  and lustre v 1.8.1.1 installed in it. This use as MDS and OSS. <br>
<br>/dev/sda3 ----2 GB------ MDT<br>/dev/sdb2 ----5 GB------ OST1<br>/dev/sdb3 ----5 GB------ OST2<br>/dev/sdb5 ----5 GB------ OST3<br>/dev/sdb6 ----5 GB------ OST4<br><br>Then I have 2 clients running on SLES 11 x86-64 and SLES 10 SP2 x86-64 both has the lustre v 1.8.1.1 installed.<br>

The SLES 10 client gives the same speed for every bs value in dd command (dd if=/dev/zero of=/lustre/sles10.out bs=1k gives 43 MB/s)<br>This is same for the every bs value on SLES 10 SP2.<br><br>But for the SLES 11 x86-64 client gives only 4 MB/s speed for the small bs values. (bs=1k )<br>

It gives 45 MB/s for the bs=32k values and up. <br><br>I have attached some outputs from the llstat command on both the clients.<br><br>Please give me a solution to tune SLES 11 x86-64 server to get 40 MB/s speed under bs=1k situvation.<br>

tnx,<br><font color="#888888">Udara<br>
</font></div><br>