<div dir="ltr">Hi Daire,<br><br>I am currently building a Lustre system using LSI-2965 (the successor of the LSI-2960 ) it has 1 GB of RAM and dual core processors.<br>My experience with the card is quite good (Raid 6 performance of this card is very good).<br>

<br>I am using it on my OSS's with the following configuration<br><br>18 1TB (7200) sas disks in a raid 6 (16 data + 2) with 256KB.<br>2 15K sas disks in raid 1 for the journal<br><br>I know the Lustre manual recommends using a stripe unit that will give a total of 1MB. <br>

But the performance I got when using 64KB stripe units (16*64=1M) were lower then the case of 256KB.<br><br>The max_sectors_kb is limited to 280 so I set it to 256<br>And I tested varios I/O schedulers without getting any difference.<br>

<br>Raw performance of the raid6 : ~960MB/sec write 1.5GB/sec Read<br>Lustre performance using the obdfilter-survey (local mode) are also good. I will email you the results later (not in office now).<br><br><br>Please let me know if there are any more details I can provide that might help you.<br>

<br>Regards<br><br>--lior<br> <br>----------------------oo--o(:-:)o--oo----------------<br>Lior Amar, Ph.D.<br>Cluster Logic Ltd --> The Art of HPC<br><a href="http://www.clusterlogic.net">www.clusterlogic.net</a><br>
----------------------------------------------------------<br>
<br>
</div>