[Lustre-discuss] Lustre over two TCP interfaces

[Alfonso Pardo]

hello friends,

I need to comunicate my OSS by two ethernet TCP interfaces: eth0 and eth1.

I have configured this feature in my modprobe.d with:

“options lnet networks=tcp0(eth0,eth1)”

And I can see two interfaces with: 

lctl --net tcp interface_list
sa-d4-01.ceta-ciemat.es: (192.168.11.15/255.255.255.0) npeer 0 nroute 2
sa-d4-01.ceta-ciemat.es: (192.168.11.35/255.255.255.0) npeer 0 nroute 0

But, the clients only can communicate with the first interface:

lctl ping 192.168.11.15
12345-0 at lo
12345-192.168.11.15 at tcp
lctl ping 192.168.11.35
failed to ping 192.168.11.35 at tcp: Input/output error


Any suggestions how to “enable” the second interface?


thank in advance
Alfonso Pardo Diaz 
System Administrator / Researcher 
c/ Sola nº 1; 10200 TRUJILLO, SPAIN 
Tel: +34 927 65 93 17 Fax: +34 927 32 32 37 

 

----------------------------
Confidencialidad: 
Este mensaje y sus ficheros adjuntos se dirige exclusivamente a su destinatario y puede contener informaci�n privilegiada o confidencial. Si no es vd. el destinatario indicado, queda notificado de que la utilizaci�n, divulgaci�n y/o copia sin autorizaci�n est� prohibida en virtud de la legislaci�n vigente. Si ha recibido este mensaje por error, le rogamos que nos lo comunique inmediatamente respondiendo al mensaje y proceda a su destrucci�n.

Disclaimer: 
This message and its attached files is intended exclusively for its recipients and may contain confidential information. If you received this e-mail in error you are hereby notified that any dissemination, copy or disclosure of this communication is strictly prohibited and may be unlawful. In this case, please notify us by a reply and delete this email and its contents immediately. 
----------------------------

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.lustre.org/pipermail/lustre-discuss_lists.lustre.org/attachments/20130625/c77f75f4/attachment.html>