[Lustre-discuss] lustre cross IP network routing

[Klaus Steden]

Hi Andrew,

1. No.

2. Not sure, check the Lustre manual for info on routing. Assuming TCP/IP
can see the whole path, it should work once the configuration for Lustre is
correct.

On 3/7/08 12:55 PM, "Lundgren, Andrew" <Andrew.Lundgren at Level3.com>did etch
on stone tablets:

> Is there any restriction that lustre nodes on TCP must be on the same IP
> subnets?
>  
> Is there anything special that needs to be done to make a client on one
> network see an MGS/OSSes on another network?
>  
> Thanks!
>  
> --
> Andrew
> 
> 
> _______________________________________________
> Lustre-discuss mailing list
> Lustre-discuss at lists.lustre.org
> http://lists.lustre.org/mailman/listinfo/lustre-discuss


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.lustre.org/pipermail/lustre-discuss-lustre.org/attachments/20080307/a2a4d206/attachment.htm>