[Lustre-discuss] lustre cross IP network routing

[Lundgren, Andrew]

Thanks!

I believe it is a router ACL issue.  But I wanted to make sure this wasn't an issue.

________________________________
From: Klaus Steden [mailto:klaus.steden at thomson.net]
Sent: Friday, March 07, 2008 3:51 PM
To: Lundgren, Andrew; 'Lustre-discuss at clusterfs.com'
Subject: Re: [Lustre-discuss] lustre cross IP network routing


Hi Andrew,

1. No.

2. Not sure, check the Lustre manual for info on routing. Assuming TCP/IP can see the whole path, it should work once the configuration for Lustre is correct.

On 3/7/08 12:55 PM, "Lundgren, Andrew" <Andrew.Lundgren at Level3.com>did etch on stone tablets:

Is there any restriction that lustre nodes on TCP must be on the same IP subnets?

Is there anything special that needs to be done to make a client on one network see an MGS/OSSes on another network?

Thanks!

--
Andrew

________________________________
_______________________________________________
Lustre-discuss mailing list
Lustre-discuss at lists.lustre.org
http://lists.lustre.org/mailman/listinfo/lustre-discuss

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.lustre.org/pipermail/lustre-discuss-lustre.org/attachments/20080307/d94c23e9/attachment.htm>