[Lustre-discuss] Lustre module not loading on client mount

Kit Westneat kwestneat at ddn.com
Mon Apr 12 21:07:43 PDT 2010


Hey Mike,

Are there any messages in dmesg on boot? I've seen it on occasion where 
the IB takes a second to actually start. If that's the case, you might 
need to add mounts to rc.local, or try to get openibd to start earlier.

- Kit

On 4/12/2010 7:33 PM, Michael Robbert wrote:
> I am trying to configure a Lustre 1.8.2 client on a CentOS 5.4 machine. I have compiled from source into RPMS and all 4 RPMS are installed (lustre, -modules, -tests, and -source). The lustre module will load find manually with "modprobe lustre", but I can not get the filesystem to automatically mount on boot up. I have added the following to /etc/modprobe.conf
>
> options lnet networks=o2ib0(ib0)
>
> and these are the entries in my /etc/fstab
>
> 172.16.34.1 at o2ib:/home  /lustre/home    lustre  auto,_netdev    1 2
> 172.16.34.1 at o2ib:/scratch       /lustre/scratch lustre  auto,_netdev    1 2
>
> I have a similar setup with Lustre 1.6.7.2 client running on RHEL 4.5 and it loads fine there.
>
> What am I missing?
>
> Thanks,
> Mike Robbert
>
> _______________________________________________
> Lustre-discuss mailing list
> Lustre-discuss at lists.lustre.org
> http://lists.lustre.org/mailman/listinfo/lustre-discuss
>    


-- 
---
Kit Westneat
kwestneat at datadirectnet.com
812-484-8485




More information about the lustre-discuss mailing list