[Lustre-discuss] lctl command usage

[Johann Lombardi]

On Fri, Jan 29, 2010 at 12:30:51PM -0500, Ms. Megan Larko wrote:
> that "network" was not run.  Am I missing something in lctl command
> usage?

# lctl
lctl > net up
LNET configured
lctl > list_nids
10.8.0.166 at tcp
lctl > conn_list
You must run the 'network' command before 'conn_list'.
lctl > net tcp
lctl > conn_list
12345-10.8.0.167 at tcp I[2]sata17->sata18:1014 16384/654368 nonagle
12345-10.8.0.167 at tcp O[1]sata17->sata18:1015 66232/87380 nonagle
12345-10.8.0.167 at tcp C[0]sata17->sata18:1016 16384/87380 nonagle
12345-10.8.0.199 at tcp I[0]sata17->sfire10:1020 16384/87380 nonagle
12345-10.8.0.199 at tcp O[3]sata17->sfire10:1022 58440/87380 nonagle
12345-10.8.0.199 at tcp C[1]sata17->sfire10:1023 16384/4194304 nonagle
12345-10.8.0.200 at tcp I[0]sata17->sfire11:1014 16384/87380 nonagle
12345-10.8.0.200 at tcp O[3]sata17->sfire11:1015 16384/87380 nonagle
12345-10.8.0.200 at tcp C[2]sata17->sfire11:1016 58440/3246672 nonagle

I don't have any ib cards on this node, but you can do the same with
"o2ib" instead of "tcp".

HTH

Johann