[Lustre-discuss] lctl command usage

[Ms. Megan Larko]

Thank you Johann!

The key line seems to be "net o2ib" and *not* net ib0.  Thanks for
pointing out my error.

megan

On Fri, Jan 29, 2010 at 1:00 PM, Johann Lombardi <johann at sun.com> wrote:
> On Fri, Jan 29, 2010 at 12:30:51PM -0500, Ms. Megan Larko wrote:
>> that "network" was not run.  Am I missing something in lctl command
>> usage?
>
> # lctl
> lctl > net up
> LNET configured
> lctl > list_nids
> 10.8.0.166 at tcp
> lctl > conn_list
> You must run the 'network' command before 'conn_list'.
> lctl > net tcp
> lctl > conn_list
> 12345-10.8.0.167 at tcp I[2]sata17->sata18:1014 16384/654368 nonagle
> 12345-10.8.0.167 at tcp O[1]sata17->sata18:1015 66232/87380 nonagle
> 12345-10.8.0.167 at tcp C[0]sata17->sata18:1016 16384/87380 nonagle
> 12345-10.8.0.199 at tcp I[0]sata17->sfire10:1020 16384/87380 nonagle
> 12345-10.8.0.199 at tcp O[3]sata17->sfire10:1022 58440/87380 nonagle
> 12345-10.8.0.199 at tcp C[1]sata17->sfire10:1023 16384/4194304 nonagle
> 12345-10.8.0.200 at tcp I[0]sata17->sfire11:1014 16384/87380 nonagle
> 12345-10.8.0.200 at tcp O[3]sata17->sfire11:1015 16384/87380 nonagle
> 12345-10.8.0.200 at tcp C[2]sata17->sfire11:1016 58440/3246672 nonagle
>
> I don't have any ib cards on this node, but you can do the same with
> "o2ib" instead of "tcp".
>
> HTH
>
> Johann
>