[Lustre-discuss] 1.6.6 to 1.8.3 upgrade, OSS with wrong "Target" value

[Wojciech Turek]

Hi,

Could you please post system logs that were generated during first mount
after the upgrade?
Did you run writeconf on MDT and all OSTs?






On 12 July 2010 16:51, Roger Sersted <rs1 at aps.anl.gov> wrote:

>
>
> This is a small development system with a combined MDS/MGS on a single node
> with
> a SCSI interface to a disk array.  There are two OSSes, each with a single
> OST
> of 1.4TB comprised of a SATA array.  In all cases, the entire device
> (/dev/sdc)
> is used with no partitioning.
>
> I upgraded my Lustre MDS and OSS servers from 1.6.6 to 1.8.3.  I did this
> via a
> complete OS install and then performing a writeconf on each of the nodes.
>
> Unfortunately, each of the OSSes thinks it's Lustre "Target" is
> "lustre1-OST0000".  I've mounted the partitions via ldiskfs and the
> underlying
> data is still there.  I know which OSS is supposed to be "lustre1-OST0001",
> but
> I can't find any docs that explain how to set that.
>
> Thanks,
>
> Roger S.
>
> _______________________________________________
> Lustre-discuss mailing list
> Lustre-discuss at lists.lustre.org
> http://lists.lustre.org/mailman/listinfo/lustre-discuss
>



-- 
--
Wojciech Turek

Assistant System Manager

High Performance Computing Service
University of Cambridge
Email: wjt27 at cam.ac.uk
Tel: (+)44 1223 763517
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.lustre.org/pipermail/lustre-discuss-lustre.org/attachments/20100712/bbddabfc/attachment.htm>