[Lustre-discuss] Problems with fstab entry on sles11

Matthias Wolf lustre-info at navum.de
Mon May 3 04:18:22 PDT 2010


Hello Folks,

i guad probelms with the fstab entry.
The lustre filesystem doesnt startup on boot.
A mount -a after reboot start the lustre filesystem.
Whats the problem?
Is there something special with SLES11.

Here are some infos about our client configuration.

snowball003:~ # cat /etc/fstab

/dev/os/swap         swap                 swap       
defaults              0 0

/dev/os/root         /                    reiserfs   
defaults              1 1

/dev/disk/by-id/ata-HITACHI_HUA7250SBSUN500G_0938JVHU3E_GTA470P6GVHU3E-part2 
/boot                reiserfs   acl,user_xattr        1 2

/dev/os/home         /export/home         reiserfs   
defaults              1 2

/dev/os/opt          /opt                 reiserfs   
defaults              1 2

/dev/os/usr          /usr                 reiserfs   
defaults              1 2

/dev/os/var          /var                 reiserfs   
defaults              1 2

proc                 /proc                proc       
defaults              0 0

sysfs                /sys                 sysfs      
noauto                0 0

debugfs              /sys/kernel/debug    debugfs    
noauto                0 0

usbfs                /proc/bus/usb        usbfs      
noauto                0 0

devpts               /dev/pts             devpts     
mode=0620,gid=5       0 0

192.168.103.224 at tcp,192.168.103.223 at tcp:/snowbfs 
/export/scratch_snowball lustre _netdev 0 0

snowball003:~ # uname -a

Linux snowball003 2.6.27.39-0.3_lustre.1.8.2-default #1 SMP 2009-11-23 
12:57:38 +0100 x86_64 x86_64 x86_64 GNU/Linux

snowball003:~ # rpm -qa | egrep "lustre|e2fs"

lustre-ldiskfs-3.0.9-2.6.27.39_0.3_lustre.1.8.2_default

kernel-source-2.6.27.39-0.3_lustre.1.8.2

kernel-default-base-2.6.27.39-0.3_lustre.1.8.2

kernel-ib-1.4.2-2.6.27.39_0.3_lustre.1.8.2_default.volt3408

kernel-default-2.6.27.39-0.3_lustre.1.8.2

kernel-ib-devel-1.4.2-2.6.27.39_0.3_lustre.1.8.2_default.volt3408

lustre-1.8.2-2.6.27.39_0.3_lustre.1.8.2_default

kernel-default-extra-2.6.27.39-0.3_lustre.1.8.2

e2fsprogs-1.41.1-13.11.1

lustre-modules-1.8.2-2.6.27.39_0.3_lustre.1.8.2_default



Thanks and regards

Matthias
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.lustre.org/pipermail/lustre-discuss-lustre.org/attachments/20100503/41ecc6a9/attachment.htm>


More information about the lustre-discuss mailing list