[Lustre-discuss] RHEL54 / Lustre 2.0.0.1 mds_getxattr -95 errors
Fan Yong
yong.fan at whamcloud.com
Tue Jan 18 19:21:09 PST 2011
I think you met the issues I mentioned in:
http://jira.whamcloud.com/browse/ORNL-3
I have made patch for it and in testing.
Before the patch landed, you can mount MDT with "-o acl" or "-o noacl"
explicitly to avoid these confused messages.
--
Nasf
On 1/18/11 10:39 PM, CHU, STEPHEN H (ATTSI) wrote:
>
> Hi all,
>
> I recently loaded the following on my testbed to try out Lustre 2.0:
>
> · One MDS -- RHEL 54, Lustre 2.0
>
> o mkfs.lustre --fsname=lufs --reformat --mgs --mdt --param
> lov.stripesize=25M --param lov.stripecount=1 /dev/sda2
>
> o /etc/fstab = /dev/sda2 /lustre1-mgs-mds lustre
> rw,noauto,_netdev 0 0
>
> · One OSS -- RHEL 54, Lustre 2.0
>
> o mkfs.lustre --fsname=lufs --reformat --ost
> --mgsnode=10.103.34.42 at o2ib0 /dev/sdb
>
> o mkfs.lustre --fsname=lufs --reformat --ost
> --mgsnode=10.103.34.42 at o2ib0 /dev/sdc
>
> o /etc/fstab = /dev/sdb /lustre1/ost1 lustre
> rw,noauto,_netdev 0 0
>
> o /dev/sdc /lustre1/ost2 lustre
> rw,noauto,_netdev 0 0
>
> · One Client -- RHEL 54, Lustre 2.0
>
> o /etc/fstab = 10.103.34.42 at o2ib0:/lufs /lustre1_fifo
> lustre rw,noauto,_netdev 0 0
>
> /lustre-mgs-mds, /lustre1/ost1,2 mounted OK on MDS and OSS.
> /lustre1_fifo mounted OK with Client. So far so good.
>
> On Client, "cd /" and performed a "ls --l". The following messages
> immediately showed up:
>
> · On Client
>
> o Jan 18 14:04:19 bg8mo33sn kernel: LustreError: 11-0: an error
> occurred while communicating with 10.103.34.42 at o2ib. The mds_getxattr
> operation failed with -95
>
> · On MDS
>
> o Jan 18 14:04:19 bg8mo33lm kernel: LustreError:
> 20056:0:(ldlm_lib.c:2123:target_send_reply_msg()) @@@ processing error
> (-95) req at ffff81031427e050 x1357944885151537/t0(0)
> o49->af4d23bf-2d42-6e4d-6afc-353425e513af at NET_0x500000a672229_UUID:0/0
> lens 448/328 e 0 to 0 dl 1295359465 ref 1 fl
> Interpret:/ffffffff/ffffffff rc -95/-1
>
> All IBs between all nodes are alive and seeing each other with no problem.
>
> The client also NFS exports /lustre1_fifo via:
>
> · /etc/exports = /lustre1_fifo testhost1(rw,sync,no_root_squash)
>
> After testhost1 mounted /lustre1_fifo and attempt to "mkdir test"
> under it, the same error messages from above showed up on the MDS and
> the client. "-95" as "Operation not supported on transport endpoint"
> but what does it mean here in this context.
>
> The same MDS/OSS/Client setup/arrangements ran fine on RHEL 5.3 and
> Lustre 1.8.1.1 with no errors.
>
> Appreciate any help/insight. Thanks.
>
> */Steve/*
>
> */Stephen Chu/*
>
> *AT&T Labs CSO*
>
> C5-3C03
>
> 200 Laurel Ave
>
> Middletown, NJ
>
> (732) 420-0588
>
> stephenchu at att.com
>
> /"This e-mail and any files transmitted with it are AT&T property, are
> confidential, and are intended solely for the use of the individual or
> entity to whom this email is addressed. If you are not one of the
> named recipient(s) or otherwise have reason to believe that you have
> received this message in error, please notify the sender and delete
> this message immediately from your computer. Any other use, retention,
> dissemination, forwarding, printing, or copying of this e-mail is
> strictly prohibited."/
>
>
> _______________________________________________
> Lustre-discuss mailing list
> Lustre-discuss at lists.lustre.org
> http://lists.lustre.org/mailman/listinfo/lustre-discuss
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.lustre.org/pipermail/lustre-discuss-lustre.org/attachments/20110119/26e1f8a8/attachment.htm>
More information about the lustre-discuss
mailing list