[Lustre-discuss] mounting Failover OSTs
Ben Evans
Ben.Evans at terascala.com
Thu Oct 11 14:20:38 PDT 2012
You must manually mount them in only one place. When a failure occurs
you have to manually mount the OST on the failover OSS (or have a piece
of software do it).
-----Original Message-----
From: lustre-discuss-bounces at lists.lustre.org
[mailto:lustre-discuss-bounces at lists.lustre.org] On Behalf Of Andrus,
Brian Contractor
Sent: Thursday, October 11, 2012 5:02 PM
To: lustre-discuss at lists.lustre.org
Subject: [Lustre-discuss] mounting Failover OSTs
All,
I am starting to try and configure failover for our lustre filesystem.
Node00 is the mgs/mdt
Node00 is the oss for ost0 and failnode for ost1
Node01 is the oss for ost1 and failnode for ost0
Both osts are on an SRP network and are visible by both nodes.
Ost0 is mounted on node00
Ost1 is mounted on node01
If I try to mount ost0 on node01 I see in the logs for node00:
kernel: Lustre: Denying initial registration attempt from nid
10.100.255.250 at o2ib, specified as failover
So do I have to manually mount the ost for failover purposes when there
is a fail?
I would have thought I mount the osts on both nodes and lustre will
manage which node is the active node.
Brian Andrus
_______________________________________________
Lustre-discuss mailing list
Lustre-discuss at lists.lustre.org
http://lists.lustre.org/mailman/listinfo/lustre-discuss
More information about the lustre-discuss
mailing list