[lustre-discuss] MDS Config Help: Are the lustre modules loaded?

Sangeetha Banavathi Srinivasa bsangee at vt.edu
Wed Jun 22 11:43:07 PDT 2016


Patrick,

The CentOS version on the machines is 6.8

	[lustre at hulk2 ~]$ cat /etc/redhat-release 
	CentOS release 6.8 (Final)


The kernel version that I have installed is what I found along with the lustre RPMs
[lustre at amaranth3 ~]$ uname -r
2.6.32-573.12.1.el6_lustre.x86_64


And I am trying to install lustre 2.8.

Should the CentOS release version be 2.7??



> On Jun 22, 2016, at 2:17 PM, Patrick Farrell <paf at cray.com> wrote:
> 
> Well, it says to check dmesg...  Though that will just list the symbols.  In general, this usually means you've got a mismatch between the version of the kernel (or OFED) Lustre is built against and your version of either the kernel or OFED.  Given the number and locations of the mismatches, I'm guessing it's the kernel.
> 
> So, compare your kernel version and your Lustre RPMs.
> 
> Regards,
> - Patrick
> On 06/22/2016 12:47 PM, Sangeetha Banavathi Srinivasa wrote:
>> When I try modprobe lustre, I see the below errors:
>> [05:44:03] root at hulk2 lustre # modprobe lustre
>> WARNING: Error inserting obdclass (/lib/modules/2.6.32-573.12.1.el6_lustre.x86_64/extra/kernel/fs/lustre/obdclass.ko): Unknown symbol in module, or unknown parameter (see dmesg)
>> WARNING: Error inserting ptlrpc (/lib/modules/2.6.32-573.12.1.el6_lustre.x86_64/extra/kernel/fs/lustre/ptlrpc.ko): Unknown symbol in module, or unknown parameter (see dmesg)
>> WARNING: Error inserting fld (/lib/modules/2.6.32-573.12.1.el6_lustre.x86_64/extra/kernel/fs/lustre/fld.ko): Unknown symbol in module, or unknown parameter (see dmesg)
>> WARNING: Error inserting lmv (/lib/modules/2.6.32-573.12.1.el6_lustre.x86_64/extra/kernel/fs/lustre/lmv.ko): Unknown symbol in module, or unknown parameter (see dmesg)
>> WARNING: Error inserting fid (/lib/modules/2.6.32-573.12.1.el6_lustre.x86_64/extra/kernel/fs/lustre/fid.ko): Unknown symbol in module, or unknown parameter (see dmesg)
>> WARNING: Error inserting mdc (/lib/modules/2.6.32-573.12.1.el6_lustre.x86_64/extra/kernel/fs/lustre/mdc.ko): Unknown symbol in module, or unknown parameter (see dmesg)
>> WARNING: Error inserting lov (/lib/modules/2.6.32-573.12.1.el6_lustre.x86_64/extra/kernel/fs/lustre/lov.ko): Unknown symbol in module, or unknown parameter (see dmesg)
>> FATAL: Error inserting lustre (/lib/modules/2.6.32-573.12.1.el6_lustre.x86_64/extra/kernel/fs/lustre/lustre.ko): Unknown symbol in module, or unknown parameter (see dmesg)
>> 
>>> On Jun 22, 2016, at 1:44 PM, Sangeetha Banavathi Srinivasa <bsangee at vt.edu <mailto:bsangee at vt.edu>> wrote:
>>> 
>>> Hi,
>>> 
>>> Below are the steps I executed in configuring MDS.
>>> 
>>> 1. mkfs.lustre --fsname lustre --mdt --mgs /dev/vg00/mdt
>>> 2. mkdir /mdt
>>> 
>>> 3. mount -t lustre /dev/vg00/mdt /mdt
>>> 
>>> I see the below error after step 3:
>>> 
>>> mount.lustre: mount /dev/mapper/vg00-mdt1 at /mdt failed: No such device
>>> Are the lustre modules loaded?
>>> Check /etc/modprobe.conf and /proc/filesystems
>>> [root at amaranth3 lustre]# 
>>> 
>>> 
>>> I tried modprobe lustre and retried mounting but it resulted in the same error.  Any help will be appreciated.
>>> 
>>> 
>>> For your info, the lustre modules that I have installed are:
>>> [root at amaranth3 lustre]# rpm -qa |grep lustre
>>> lustre-osd-ldiskfs-mount-2.8.0-2.6.32_573.12.1.el6_lustre.x86_64.x86_64
>>> lustre-tests-2.8.0-2.6.32_573.12.1.el6_lustre.x86_64.x86_64
>>> lustre-modules-2.8.0-2.6.32_573.12.1.el6_lustre.x86_64.x86_64
>>> lustre-osd-ldiskfs-2.8.0-2.6.32_573.12.1.el6_lustre.x86_64.x86_64
>>> lustre-iokit-2.8.0-2.6.32_573.12.1.el6_lustre.x86_64.x86_64
>>> kernel-2.6.32-573.12.1.el6_lustre.x86_64
>>> lustre-2.8.0-2.6.32_573.12.1.el6_lustre.x86_64.x86_64
>>> 
>>> [root at amaranth3 lustre]# rpm -qa |grep e2fs
>>> e2fsprogs-libs-1.42.13.wc5-7.el6.x86_64
>>> e2fsprogs-1.42.13.wc5-7.el6.x86_64
>>> 
>>> [root at amaranth3 lustre]# rpm -qa |grep libss
>>> libss-1.42.13.wc5-7.el6.x86_64
>>> 
>>> root at amaranth3 lustre]# rpm -qa |grep libcom
>>> libcom_err-1.42.13.wc5-7.el6.x86_64
>>> 
>>> 
>>> [root at amaranth3 lustre]# uname -a
>>> Linux amaranth3 2.6.32-573.12.1.el6_lustre.x86_64 #1 SMP Tue Feb 23 22:41:09 PST 2016 x86_64 x86_64 x86_64 GNU/Linux
>>> [root at amaranth3 lustre]# 
>>> 
>>> 
>>> 
>>> Thanks,
>>> Sangeetha 
>> 
>> 
>> 
>> _______________________________________________
>> lustre-discuss mailing list
>> lustre-discuss at lists.lustre.org <mailto:lustre-discuss at lists.lustre.org>
>> http://lists.lustre.org/listinfo.cgi/lustre-discuss-lustre.org <http://lists.lustre.org/listinfo.cgi/lustre-discuss-lustre.org>
> 
> _______________________________________________
> lustre-discuss mailing list
> lustre-discuss at lists.lustre.org
> http://lists.lustre.org/listinfo.cgi/lustre-discuss-lustre.org

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.lustre.org/pipermail/lustre-discuss-lustre.org/attachments/20160622/122fb652/attachment-0001.htm>


More information about the lustre-discuss mailing list