[lustre-discuss] slow write performance from client to server

Peter Jones pjones at whamcloud.com
Tue Oct 16 05:54:42 PDT 2018


Have you tried running 2.10.5 on a RHEL6 client?

On 2018-10-16, 2:13 AM, "lustre-discuss on behalf of Riccardo Veraldi" <lustre-discuss-bounces at lists.lustre.org on behalf of Riccardo.Veraldi at cnaf.infn.it> wrote:

    On 10/16/18 2:08 AM, George Melikov wrote:
    > Please post your benchmark method.
    
    my benchmark method is by using bbcp.
    
    lustre clients 2.10.5 on RHEL7  are fast (1.1GB/s) while RHEL6 clients 
    using 2.8.0 perform very poorly (2MB/s)
    
    
    >
    > ____________________________________
    > Sincerely,
    > George Melikov,
    > Tel. 7-915-278-39-36
    > Skype: georgemelikov
    >
    >
    > 16.10.2018, 12:03, "Riccardo Veraldi" <riccardo.veraldi at cnaf.infn.it>:
    >> On 10/15/18 4:59 PM, Alexander I Kulyavtsev wrote:
    >>>   You can do a quick check with 2.10.5 client by mounting lustre on MDS if you do not have free node to install 2.10.5 client.
    >>>
    >>>   Do you have lnet configured with IB or 10GE? LNet defaults to tcp if not set. Can it be you are connected through slow management network?
    >>>
    >>>   Alex.
    >> hi, my lnet is configured with both IB and 10GE. it is using IB I
    >> verified it and anyway performance is very slow even if it where just
    >> using tcp on 10GE
    >>
    >> since I only get 2MB/s
    >>
    >> thanks
    >>
    >>>   On 10/15/18, 6:41 PM, "lustre-discuss on behalf of Riccardo Veraldi" <lustre-discuss-bounces at lists.lustre.org on behalf of Riccardo.Veraldi at cnaf.infn.it> wrote:
    >>>
    >>>        Hello,
    >>>
    >>>        I have a new Lustre FS version 2.10.5. 18 OSTs 18TB each on 3 OSSes.
    >>>
    >>>        I noticed very slow performances couple of MB/sec when RHEL6 Lustre
    >>>        clients 2.8.0 are writing to the fielsystem.
    >>>
    >>>        Could it be a Lustre version problem server vs client ?
    >>>
    >>>        I have no errors either on server or client side that can debug it
    >>>        further...
    >>>
    >>>        thanks
    >>>
    >>>        Rick
    >>>
    >>>        _______________________________________________
    >>>        lustre-discuss mailing list
    >>>        lustre-discuss at lists.lustre.org
    >>>        https://urldefense.proofpoint.com/v2/url?u=http-3A__lists.lustre.org_listinfo.cgi_lustre-2Ddiscuss-2Dlustre.org&d=DwIGaQ&c=gRgGjJ3BkIsb5y6s49QqsA&r=23V5nhLj03jeTboyg6QveA&m=ABK5Lf73Df1JeZ-ryuh87ds4a5qoTk1gcookZ1auOuU&s=3gW-gvhmg4r0oQv3isx4u1P2TBHOzyDeFC-MZoxR68Y&e=
    >> _______________________________________________
    >> lustre-discuss mailing list
    >> lustre-discuss at lists.lustre.org
    >> http://lists.lustre.org/listinfo.cgi/lustre-discuss-lustre.org
    
    
    _______________________________________________
    lustre-discuss mailing list
    lustre-discuss at lists.lustre.org
    http://lists.lustre.org/listinfo.cgi/lustre-discuss-lustre.org
    



More information about the lustre-discuss mailing list