[lustre-discuss] Lustre-2.10.5 problem
Nathaniel Clark
nclark at whamcloud.com
Mon Sep 24 06:21:19 PDT 2018
Hello Tung-Han,
ZFS 0.7.11 doesn’t compile cleanly with Lustre, yet.
There’s a ticket for adding ZFS 0.7.11 support to lustre:
https://jira.whamcloud.com/browse/LU-11393
It has patches for master (pre-2.12) and a separate patch for 2.10.
—
Nathaniel Clark <nclark at whamcloud.com<mailto:nclark at whamcloud.com>>
Senior Engineer
Whamcloud / DDN
On Sep 24, 2018, at 2:15 PM, Tung-Han Hsieh <thhsieh at twcp1.phys.ntu.edu.tw<mailto:thhsieh at twcp1.phys.ntu.edu.tw>> wrote:
Dear All,
I am trying to install Lustre version 2.10.5 with ZFS-0.7.11
from source code. After compilation and installation, I tried
to load the "lustre" module, but encountered the following
error:
# modprobe lustre
could not load module 'lustre': no such device
My procedure of installation is the following:
1. Compile vanilla kernel 3.12.72 downloaded from:
https://mirrors.edge.kernel.org/pub/linux/kernel/v3.x/linux-3.12.72.tar.gz
2. Compile spl-0.7.11 downloaded from:
https://github.com/zfsonlinux/zfs/releases/download/zfs-0.7.11/spl-0.7.11.tar.gz
with the following steps:
# ./configure --prefix=/opt/lustre --with-linux=/path/to/linux-3.12.72
# make
# make install
3. Compile zfs-0.7.11 downloaded from:
https://github.com/zfsonlinux/zfs/releases/download/zfs-0.7.11/zfs-0.7.11.tar.gz
with the following steps:
# ./configure --prefix=/opt/lustre \
--with-linux=/path/to/linux-3.12.72 \
--with-spl=/path/to/spl-0.7.11
# make
# make install
4. Compile lustre downloaded from:
https://downloads.whamcloud.com/public/lustre/lustre-2.10.5/sles12sp3/client/SRPMS/lustre-2.10.5-1.src.rpm
Then I unpack the SRPM by the command:
# rpm2cpio lustre-2.10.5-1.src.rpm | cpio --extract --make-directories
and compile it by the following:
# ./configure --prefix=/opt/lustre \
--with-linux=/path/to/linux-3.12.72 \
--with-spl=/path/to/spl-0.7.11 \
--with-zfs=/path/to/zfs-0.7.11 \
--with-o2ib=no \
--disable-ldiskfs
# make
# make install
5. I have made sure the following settings and utilities are correct:
- PATH contains /opt/lustre/bin and /opt/lustre/sbin
- /sbin/mount.lustre exists.
- /sbin/mount.zfs exists.
- /usr/sbin/l_getidentity exists.
- /usr/sbin/ko2iblnd-probe exists.
- /etc/modprobe.d/lustre.conf contains:
options lnet networks=tcp
- /etc/modprobe.d/ko2iblnd.conf contains:
alias ko2iblnd-opa ko2iblnd
options ko2iblnd-opa peer_credits=128 peer_credits_hiw=64 credits=1024 concurrent_sends=256 ntx=2048 map_on_demand=32 fmr_pool_size=2048 fmr_flush_trigger=512 fmr_cache=1
install ko2iblnd /usr/sbin/ko2iblnd-probe
Then I tried to run "modprobe lustre", it says "no such device" error.
I tried to replace Lustre-2.10.5 by Lustre-2.9 downloaded from:
https://downloads.whamcloud.com/public/lustre/lustre-2.9.0/sles12sp1/client/SRPMS/lustre-2.9.0-1.src.rpm
and proceed exactly the same installation steps. Everything works fine.
Could anyone suggest me what have I missed for lustre-2.10.5 ? Or suggest
me how to debug.
Thanks very much.
T.H.Hsieh
_______________________________________________
lustre-discuss mailing list
lustre-discuss at lists.lustre.org
http://lists.lustre.org/listinfo.cgi/lustre-discuss-lustre.org
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.lustre.org/pipermail/lustre-discuss-lustre.org/attachments/20180924/538a1056/attachment.html>
More information about the lustre-discuss
mailing list