[lustre-discuss] Building lustre on rocky 8.8 fails?

[Xinliang Liu]

Hi Jan,

On Tue, 2 Jan 2024 at 22:29, Jan Andersen <jan at comind.io> wrote:

> I have installed Rocky 8.8 on a new server (Dell PowerEdge R640):
>
> [root at mds 4.18.0-513.9.1.el8_9.x86_64]# cat /etc/*release*
> Rocky Linux release 8.8 (Green Obsidian)
> NAME="Rocky Linux"
> VERSION="8.8 (Green Obsidian)"
> ID="rocky"
> ID_LIKE="rhel centos fedora"
> VERSION_ID="8.8"
> PLATFORM_ID="platform:el8"
> PRETTY_NAME="Rocky Linux 8.8 (Green Obsidian)"
> ANSI_COLOR="0;32"
> LOGO="fedora-logo-icon"
> CPE_NAME="cpe:/o:rocky:rocky:8:GA"
> HOME_URL="https://rockylinux.org/"
> BUG_REPORT_URL="https://bugs.rockylinux.org/"
> SUPPORT_END="2029-05-31"
> ROCKY_SUPPORT_PRODUCT="Rocky-Linux-8"
> ROCKY_SUPPORT_PRODUCT_VERSION="8.8"
> REDHAT_SUPPORT_PRODUCT="Rocky Linux"
> REDHAT_SUPPORT_PRODUCT_VERSION="8.8"
> Rocky Linux release 8.8 (Green Obsidian)
> Rocky Linux release 8.8 (Green Obsidian)
> Derived from Red Hat Enterprise Linux 8.8
> Rocky Linux release 8.8 (Green Obsidian)
> cpe:/o:rocky:rocky:8:GA
>
> I downloaded the kernel source (I don't remember the exact command):
>
> [root at mds 4.18.0-513.9.1.el8_9.x86_64]# ll /usr/src/kernels
> total 8
> drwxr-xr-x. 24 root root 4096 Jan  2 13:49 4.18.0-513.9.1.el8_9.x86_64/
> drwxr-xr-x. 23 root root 4096 Jan  2 11:41
> 4.18.0-513.9.1.el8_9.x86_64+debug/
>
> Copied the config from /boot and ran:
>
> yes "" | make oldconfig
>
> After that I cloned the Lustre source and configured (according to my
> notes):
>
> git clone git://git.whamcloud.com/fs/lustre-release.git
> cd lustre-release
> git checkout 2.15.3
>
> dnf install libtool
> dnf install flex
> dnf install bison
> dnf install openmpi-devel
> dnf install python3-devel
> dnf install python3
> dnf install kernel-devel kernel-headers
> dnf install elfutils-libelf-devel
> dnf install keyutils keyutils-libs-devel
> dnf install libmount
> dnf --enablerepo=powertools install libmount-devel
> dnf install libnl3 libnl3-devel
> dnf config-manager --set-enabled powertools
> dnf install libyaml-devel
> dnf install patch
> dnf install e2fsprogs-devel
> dnf install kernel-core
> dnf install kernel-modules
> dnf install rpm-build
> dnf config-manager --enable devel
> dnf config-manager --enable powertools
> dnf config-manager --set-enabled ha
> dnf install kernel-debuginfo
>
> sh autogen.sh
> ./configure
>
> This appeared to finish without errors:
>
> ...
> config.status: executing libtool commands
>
> CC:            gcc
> LD:            /usr/bin/ld -m elf_x86_64
> CPPFLAGS:      -include /root/lustre-release/undef.h -include
> /root/lustre-release/config.h -I/root/lustre-release/lnet/include/uapi
> -I/root/lustre-release/lustre/include/uapi
> -I/root/lustre-release/libcfs/include -I/root/lustre-release/lnet/utils/
> -I/root/lustre-release/lustre/include
> CFLAGS:        -g -O2 -Wall -Werror
> EXTRA_KCFLAGS: -include /root/lustre-release/undef.h -include
> /root/lustre-release/config.h  -g -I/root/lustre-release/libcfs/include
> -I/root/lustre-release/libcfs/include/libcfs
> -I/root/lustre-release/lnet/include/uapi
> -I/root/lustre-release/lnet/include
> -I/root/lustre-release/lustre/include/uapi
> -I/root/lustre-release/lustre/include -Wno-format-truncation
> -Wno-stringop-truncation -Wno-stringop-overflow
>
> Type 'make' to build Lustre.
>
> However, when I run make:
>
> [root at mds lustre-release]# make
> make  all-recursive
> make[1]: Entering directory '/root/lustre-release'
> Making all in ldiskfs
> make[2]: Entering directory '/root/lustre-release/ldiskfs'
> make[2]: *** No rule to make target
> '../ldiskfs/kernel_patches/series/ldiskfs-', needed by 'sources'.  Stop.
>

This looks like it can't detect the ldiskfs-4.18-rhel8.8.series property.
Most probably the ext4 kernel source rpm (kernel-debuginfo-common-x86_64)
hasn't been installed yet.
And like Andreas said try latest 2.15.4.

Best,
Xinliang



> make[2]: Leaving directory '/root/lustre-release/ldiskfs'
> make[1]: *** [autoMakefile:649: all-recursive] Error 1
> make[1]: Leaving directory '/root/lustre-release'
> make: *** [autoMakefile:521: all] Error 2
>
> Alternatively, I tried make rpms which results in:
>
> ...
> rpmbuilddir=`mktemp -t -d rpmbuild-lustre-$USER-XXXXXXXX`; \
> make  \
>          rpmbuilddir="$rpmbuilddir" rpm-local || exit 1; \
> cp ./rpm/* .; \
> /usr/bin/rpmbuild \
>          --define "_tmppath $rpmbuilddir/TMP" \
>          --define "_topdir $rpmbuilddir" \
>          --define "dist %{nil}" \
>          -ts lustre-2.15.3.tar.gz || exit 1; \
> cp $rpmbuilddir/SRPMS/lustre-2.15.3-*.src.rpm . || exit 1; \
> rm -rf $rpmbuilddir
> make[1]: Entering directory '/root/lustre-release'
> make[1]: Leaving directory '/root/lustre-release'
> error: line 239: Dependency tokens must begin with alpha-numeric, '_' or
> '/': BuildRequires: %kernel_module_package_buildreqs
> make: *** [autoMakefile:1237: srpm] Error 1
>
>
> So, I'm stuck - it seems this is something I do a lot; how do I move
> forward from here?
>
> _______________________________________________
> lustre-discuss mailing list
> lustre-discuss at lists.lustre.org
> http://lists.lustre.org/listinfo.cgi/lustre-discuss-lustre.org
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.lustre.org/pipermail/lustre-discuss-lustre.org/attachments/20240103/e0d6acb3/attachment.htm>