[lustre-discuss] Building lustre on rocky 8.8 fails?

[Xinliang Liu]

On Wed, 3 Jan 2024 at 10:08, Xinliang Liu <xinliang.liu at linaro.org> wrote:

> Hi Jan,
>
> On Tue, 2 Jan 2024 at 22:29, Jan Andersen <jan at comind.io> wrote:
>
>> I have installed Rocky 8.8 on a new server (Dell PowerEdge R640):
>>
>> [root at mds 4.18.0-513.9.1.el8_9.x86_64]# cat /etc/*release*
>> Rocky Linux release 8.8 (Green Obsidian)
>> NAME="Rocky Linux"
>> VERSION="8.8 (Green Obsidian)"
>> ID="rocky"
>> ID_LIKE="rhel centos fedora"
>> VERSION_ID="8.8"
>> PLATFORM_ID="platform:el8"
>> PRETTY_NAME="Rocky Linux 8.8 (Green Obsidian)"
>> ANSI_COLOR="0;32"
>> LOGO="fedora-logo-icon"
>> CPE_NAME="cpe:/o:rocky:rocky:8:GA"
>> HOME_URL="https://rockylinux.org/"
>> BUG_REPORT_URL="https://bugs.rockylinux.org/"
>> SUPPORT_END="2029-05-31"
>> ROCKY_SUPPORT_PRODUCT="Rocky-Linux-8"
>> ROCKY_SUPPORT_PRODUCT_VERSION="8.8"
>> REDHAT_SUPPORT_PRODUCT="Rocky Linux"
>> REDHAT_SUPPORT_PRODUCT_VERSION="8.8"
>> Rocky Linux release 8.8 (Green Obsidian)
>> Rocky Linux release 8.8 (Green Obsidian)
>> Derived from Red Hat Enterprise Linux 8.8
>> Rocky Linux release 8.8 (Green Obsidian)
>> cpe:/o:rocky:rocky:8:GA
>>
>> I downloaded the kernel source (I don't remember the exact command):
>>
>> [root at mds 4.18.0-513.9.1.el8_9.x86_64]# ll /usr/src/kernels
>> total 8
>> drwxr-xr-x. 24 root root 4096 Jan  2 13:49 4.18.0-513.9.1.el8_9.x86_64/
>> drwxr-xr-x. 23 root root 4096 Jan  2 11:41
>> 4.18.0-513.9.1.el8_9.x86_64+debug/
>>
>> Copied the config from /boot and ran:
>>
>> yes "" | make oldconfig
>>
>> After that I cloned the Lustre source and configured (according to my
>> notes):
>>
>> git clone git://git.whamcloud.com/fs/lustre-release.git
>> cd lustre-release
>> git checkout 2.15.3
>>
>> dnf install libtool
>> dnf install flex
>> dnf install bison
>> dnf install openmpi-devel
>> dnf install python3-devel
>> dnf install python3
>> dnf install kernel-devel kernel-headers
>> dnf install elfutils-libelf-devel
>> dnf install keyutils keyutils-libs-devel
>> dnf install libmount
>> dnf --enablerepo=powertools install libmount-devel
>> dnf install libnl3 libnl3-devel
>> dnf config-manager --set-enabled powertools
>> dnf install libyaml-devel
>> dnf install patch
>> dnf install e2fsprogs-devel
>> dnf install kernel-core
>> dnf install kernel-modules
>> dnf install rpm-build
>> dnf config-manager --enable devel
>> dnf config-manager --enable powertools
>> dnf config-manager --set-enabled ha
>> dnf install kernel-debuginfo
>>
>> sh autogen.sh
>> ./configure
>>
>> This appeared to finish without errors:
>>
>> ...
>> config.status: executing libtool commands
>>
>> CC:            gcc
>> LD:            /usr/bin/ld -m elf_x86_64
>> CPPFLAGS:      -include /root/lustre-release/undef.h -include
>> /root/lustre-release/config.h -I/root/lustre-release/lnet/include/uapi
>> -I/root/lustre-release/lustre/include/uapi
>> -I/root/lustre-release/libcfs/include -I/root/lustre-release/lnet/utils/
>> -I/root/lustre-release/lustre/include
>> CFLAGS:        -g -O2 -Wall -Werror
>> EXTRA_KCFLAGS: -include /root/lustre-release/undef.h -include
>> /root/lustre-release/config.h  -g -I/root/lustre-release/libcfs/include
>> -I/root/lustre-release/libcfs/include/libcfs
>> -I/root/lustre-release/lnet/include/uapi
>> -I/root/lustre-release/lnet/include
>> -I/root/lustre-release/lustre/include/uapi
>> -I/root/lustre-release/lustre/include -Wno-format-truncation
>> -Wno-stringop-truncation -Wno-stringop-overflow
>>
>> Type 'make' to build Lustre.
>>
>> However, when I run make:
>>
>> [root at mds lustre-release]# make
>> make  all-recursive
>> make[1]: Entering directory '/root/lustre-release'
>> Making all in ldiskfs
>> make[2]: Entering directory '/root/lustre-release/ldiskfs'
>> make[2]: *** No rule to make target
>> '../ldiskfs/kernel_patches/series/ldiskfs-', needed by 'sources'.  Stop.
>>
>
> This looks like it can't detect the ldiskfs-4.18-rhel8.8.series property.
> Most probably the ext4 kernel source rpm (kernel-debuginfo-common-x86_64)
> hasn't been installed yet.
> And like Andreas said try latest 2.15.4.
>
> Best,
> Xinliang
>
>
>
>> make[2]: Leaving directory '/root/lustre-release/ldiskfs'
>> make[1]: *** [autoMakefile:649: all-recursive] Error 1
>> make[1]: Leaving directory '/root/lustre-release'
>> make: *** [autoMakefile:521: all] Error 2
>>
>> Alternatively, I tried make rpms which results in:
>>
>> ...
>> rpmbuilddir=`mktemp -t -d rpmbuild-lustre-$USER-XXXXXXXX`; \
>> make  \
>>          rpmbuilddir="$rpmbuilddir" rpm-local || exit 1; \
>> cp ./rpm/* .; \
>> /usr/bin/rpmbuild \
>>          --define "_tmppath $rpmbuilddir/TMP" \
>>          --define "_topdir $rpmbuilddir" \
>>          --define "dist %{nil}" \
>>          -ts lustre-2.15.3.tar.gz || exit 1; \
>> cp $rpmbuilddir/SRPMS/lustre-2.15.3-*.src.rpm . || exit 1; \
>> rm -rf $rpmbuilddir
>> make[1]: Entering directory '/root/lustre-release'
>> make[1]: Leaving directory '/root/lustre-release'
>> error: line 239: Dependency tokens must begin with alpha-numeric, '_' or
>> '/': BuildRequires: %kernel_module_package_buildreqs
>>
>
And this might caused by lacking of rpm kernel-rpm-macros.
Usually,  sudo dnf builddep -y lustre.spec should install all the build
required RPMs.


> make: *** [autoMakefile:1237: srpm] Error 1
>>
>>
>> So, I'm stuck - it seems this is something I do a lot; how do I move
>> forward from here?
>>
>> _______________________________________________
>> lustre-discuss mailing list
>> lustre-discuss at lists.lustre.org
>> http://lists.lustre.org/listinfo.cgi/lustre-discuss-lustre.org
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.lustre.org/pipermail/lustre-discuss-lustre.org/attachments/20240103/05839114/attachment-0001.htm>